Greenhouse Arrow: Summer from the manufacturer, assembling the greenhouse, Glory and reviews from polycarbonate, video, royal

The Strelka hothouse is well-developed as a year-round structure suitable for growing almost any plant The construction of the "Summer arrow" in a height of 2.5 m allows to grow tall plants, and a strong frame and a good polycarbonate coating makes it possible to growVegetables and greens in the winter, and also to plant flowers or seedlings.

Greenhouse "Summer Arrow": the main advantages of

The greenhouse has a unique shape, which is the main feature of the design. The frame of the greenhouse is made of a material that can not be corroded. Galvanized profile with a thickness of 1 mm with a section of 20x60 mm allows to withstand a heavy load of snow, so this greenhouse can be installed in regions with severe snowy winters.

Greenhouse "Dachnaya Strelka" has undeniable advantages

The square meter of the "Summer hand" withstands 450 kg of weight, this equals a snow cover of 2 meters thick!

Due to its characteristics, the "Summer Bowman" does not need to strengthen the frame, unlike other structures, for example, the Kremlin's or Slava Lux's greenhouses.

Advantages of construction:

• Drop-shaped form is another name for "Edelweiss".Snow and other precipitation easily slide down from the top of the roof, without stagnating on the structure.
• Convenient greenhouse dimensions: 2.6 or 3 meters width, standard height 2.5 meters and length 2, 4, 8, etc. Depending on the length of the construction, a useful area for growing plants is calculated.
• Withstands a lot of weight.
• The height of the greenhouse allows you to grow not only low plants. The beds are located on either side of the central path.
• The foundation is not required for installation of the structure.

Farmers note that in this greenhouse it is most advantageous to place two meter long beds with a pass of 50 cm in the middle. With this arrangement it will be convenient to grow tall cucumbers, tomatoes and low-growing herbs. If desired, you can install special shelves in several rows with boxes for seedlings or flowers.

Polycarbonate greenhouse "Strelka" from the manufacturer LLC "Volya"

For the hiding of the greenhouse cellular material - polycarbonate is used. For "Dachnaya Arrows" material is used from two layers, which are connected by ribs for rigidity. Air, which is in the formed cells, provides additional thermal insulation. Polycarbonate does not let out harmful and scorching sunlight for plants, but at the same time it differs in good light conductivity.

According to the manufacturer, the greenhouse of polycarbonate arrow is designed to create an ideal microclimate in which, under favorable conditions, different cultures will be grown.

The greenhouse is impact resistant, it does not suffer from hail or heavy rain. Therefore, many farmers prefer polycarbonate, rather than glass. The coating does not need special care, polycarbonate is not afraid of rain, frost or heat. This material is suitable for both southern and northern regions of the country.

A jigsaw or a hacksaw with fine teeth are used to cut the material.

Polycarbonate sheets are attached to the frame slightly overlapping and pressed against the galvanized profile with a special wire bandage. The material is rather light, so the main load on the ground is provided by an iron frame.

"Arrow 3" greenhouse: design characteristic of

Taking into account positive user feedback, Volia has developed a greenhouse "Summer Arrow 3".The popularity of the model is explained by its quality - a sturdy frame made of galvanized profile and coatings from a two-layer honeycomb polycarbonate.

Greenhouse "Summer Arrow 3" is able to eliminate many problems that the characters for arched and gable greenhouses

The galvanized frame is resistant to corrosion, it tolerates humidity and high or low temperatures.

Do not use smoke bombs inside the structure - the frame may become black.

Tightly adhering material sheets provide dense sealing and protect plants against wind loads. Caring for a coating is quite simple - just wash polycarbonate with water from a hose or a solution of laundry soap. It is not recommended to use brushes, hard woolen cloths and dry cleaning powders to care for the coating.

The area for planting vegetables depends on the length of the structure, it is a multiple of 2 and starts from 2 meters."Arrow 3" differs from the usual "Dachnaya Arrows" with its width of 3 m. Its height is 2.5 m, which allows planting tall plants. If desired, the greenhouse can be extended - an additional section of 3x2.5x2 is very easy to install from either side of the structure.

The basic set of "Arrow 3" includes two end doors and door leaflets, if you want, you can buy ridge windows for better ventilation. The heavy-duty garden greenhouse "Arrow 3" does not need a special foundation, despite its weight.

Similar characteristics have a "Tsar's Arrow" greenhouse with an acute-angled shape of the dome, which is also capable of withstanding enormous loads on the frame.

Assembly of the greenhouse "Summer arrow":

features The "Dachshund" is able to collect even the one who first encountered the assembly of such structures. To assemble and install it, you do not need to purchase additional items - the kit already includes a frame, cover and fixing materials. There is also an instruction with illustrations on which you can mount the greenhouse yourself without the help of specialists.

Self-construction can easily be assembled by two people

For a more solid installation, you need to dig a shallow trench that will replace the foundation. In strong winds, you can install a ribbon wooden foundation, which fixes the structure.

Before assembling the "Dachnaya Arrows", you need to choose a suitable place for installation. The greenhouse should be located on the sunny side of the plot. Nearby there should not be buildings and tall trees that can obscure the structure.

The frame of the greenhouse is mounted using nuts and screws, and a greenhouse is installed in the excavated trench by digging into the ground the protruding wireframe spirit. After mounting the base, you can proceed to fastening the cover. For a greenhouse, you need 5 polycarbonate sheets with a size of 2.1x6 m, the thickness of the sheet is 4 mm, but for windy and frosty locations, you can take polycarbonate 6 mm thick. The sheets are rolled up and transported conveniently.

Polycarbonate sheets are mounted to the galvanized frame with a special cable bandage. Each sheet is closely pressed against the frame to avoid penetration of drafts and precipitation inside the greenhouse.

In addition, you can buy windows, if the structure is not well ventilated. For greater convenience, they can be equipped with automatic opening.

With proper installation, the greenhouse can withstand heavy loads of snow in winter and last a long time. The main thing is to clean up the snow in time, falling from the roof and walls, to avoid the appearance of dents on the sides of the structure.

Greenhouse "Arrow"( video)

Greenhouses "Dachnaya Strelka" and "Strelka 3" have positive characteristics and quite satisfy the users' requests. In order to avoid any difficulties with the installation of the structure, it is recommended that you carefully read the instructions and perform all the work consistently. Correctly mounted building is the guarantee of a good harvest!