Voltage regulators for home: Reviews. What is better to choose

Purchase and installation of a voltage stabilizer is cheaper than replacing a burnt-out machinery

voltage regulators for home: Reviews. What is better to choose the instrument for the protection of electrical

voltage regulators - this device is automatically adjusted to within the permissible value of the voltage supplied to the network, for trouble-free operation of electrical engineering. They can be used both for individual equipment (local), and used to protect the entire network (landline).

How to choose the voltage regulators for private homes

The choice of stabilizer for the house begins with a definition of the type of power supply. In most cases - a single-phase power, when the house is brought cable with three or less wires. In this type of power supply with single-phase voltage stabilizers for the home. If the cable contains four wires - a three-phase power supply, designed for electrical work at a voltage of 380V. In this case, a three-phase voltage stabilizers for the home.

Internals relay stabilizer LogicPower power 0.35 kW

From the reviews it is known that in the case of three-phase supply, if not expected to work three-phase consumers can install three-phase rectifier, and they can pick up a different power and characteristics, which will affect the overall cost of instruments. So, to separate low-power technology, selected minor local power rectifier, which cost much less than the more powerful counterparts. In addition, the phase which is rarely used, can generally be left without protection. It is also possible to apply the same phase Bole accurate equalizer, and on the other - is less accurate and therefore less costs.

Related article:

To determine with the necessary power for an equalizer, you can go two ways. In the first case should be guided by the circuit breaker. If the machine limits the power supply to 25A, the required power stabilizer is defined as the product of 25A x 220 = 5.5 kW. Adding headroom obtain the necessary power stabilizer 6 kW.

Stabilizers Teplocom voltage developed for use in heating systems

By studying users' opinions, you can see that the lower rectifier output, and hence the cost of its acquisition, perhaps summing the power of all the equipment. Taking into account that all the equipment at the same time will not turn on, you can opt for a less powerful device.

Another important measure is the input voltage range.

Useful advice! The working voltage range at the input of the device is considered to range in which the rectifier not only works, but also provides the stated stabilization accuracy.

Of customer reviews:

"Some incompetent sellers confuse the operating range of the concept of a limit range in which the regulator will just work without providing the stated accuracy of stabilization. Do not fall for these tricks. "

Igor Homchuk, city Krasnoyarsk

Single-phase triac Stabilizer Luxeon power of 2.1 kW

Effect precision alignment stabilizer for varying electrical

Stopping the choice on the accuracy of the alignment, it is necessary to know that this feature shows how much quality will be the output voltage. Good reviews are electromechanical stabilizers Resanta giving the accuracy of the output voltage of +/- 2%. Such an indicator makes it possible to use these stabilizers for precision equipment and appliances with electric motors.

Accuracy stabilizer control below 220 ± 3% when a voltage lowering effect on lighting lamps and halogen lamps. Eye becomes noticeable change in the lighting level when switching rectifier stages. Choosing regulator should take into account this factor.

Driving voltage grading network using stabilizer

For the modern household equipment is necessary to select a model with an accuracy of stabilization 220V ± 7%.

House has audio, hi-fi equipment, expensive models of TVs, gas heating boilers electronic control provides for the maintenance of the stabilizer with high accuracy output voltage - 220 ± 1%.

Wall model of voltage regulators from the manufacturer Rucelf

The main criteria for the choice of the voltage regulator for the private home

Decide what kind of voltage regulator for better at home, should take into account the main criteria:

• protective factors - rectifier important condition is the presence of protective functions that protect the unit against short circuits, overheating and overloads affecting the correct operation and long life device;
• the voltage on the input - is to choose stabilizers 210-230V control range. This model allows you to connect to an existing network technology, designed for Western standards without deteriorating technical condition of the latter, as well as extend the life of incandescent lamps at a voltage 210B;
• switch rectifier - a device capable after shutdown (in the case of output voltage beyond operating range) via the selected period is automatically re-apply the load (in the case of returning to the voltage rate). This will not include a manual device;
• power matching for any input voltage - a device capable of retaining claimed output power at low input voltage.

Internals relay single phase stabilizer LogicPower LPH-RD 800

Useful advice! By purchasing a stabilizer, should be taken into account that the nameplate capacity of the device will be much less if the input voltage is below 220V. Strong deflection voltage can reduce half the capacity of the device.

Visiting the thematic forums, you can find reviews of a voltage regulator for home better.

Here are some of them:

"When voltage fluctuation in the network to 150V, it is better to buy an electromechanical stabilizer Resanata ACH-15000/1-M. This device, even when the inlet 140B, 180B provides at the output. It works flawlessly with no failures. And sister ASN-10000/1-C, e, not even pulling the pump for the water supply. "

Ilya Samoilov, city Saratov

Suspension stabilizers Resanta producer voltage

"I bought three years ago Resanta ACH-20000/1-M, several months worked and stopped brownouts. Took it to the service center, the warranty replaced the brush. After repair work efficiently. "

Sergei Ushakov, Mr. St. Petersburg

"I have the stabilizer single-phase energy Voltron RSN-3000, the compact dimensions of the device, mounted on the wall and does not take up much space. I was happy with everything. "

Grigory Vyatkin, city Minsk

The principle of operation of the stabilizer system with double conversion

What better voltage regulators: a review of some models

When selecting the rectifier should pay attention to the unit's ability to carry the load. For example, if the power device has been acquired at 10kW, and the voltage is dropped to 160V, the rectifier fails. Hence, the stabilizer was the low load indicator 160B tolerability and had a capacity of 5 kW, 10 kW instead of the declared. Therefore, it is important what kind of load can withstand the stabilizer when changing the voltage.

Useful advice! For normal operation, the rectifier should prefer models with high load capacity model or acquire twice the power of the proposed settlement.

Automatic voltage regulator Powerman AVS 1000D PLUS

Ability rectifiers some time overload capability is called overload capacity. This criterion indicates correctness and quality of assembly of the device. Substandard model overload do not hold inverters.

Reviews suggest that firms ORTEA devices, voltage regulators for the Italian house, whose price is very high, have assembling quality, high resistance to overloads, an accuracy of normalization ± 0,5, the protective functions and the electronic regulation.

Floor AC voltage stabilizer Progress

From domestic manufacturers marked rectifiers Calm, Leader. Reliable instruments, however, the accuracy of the stabilization of these models ± 5.

Resanta company produces high-quality high-tech devices, oriented to the requirements of international standards. Characterized by high accuracy of the output voltage, excellent overload capacity, quiet operation and democratic price.

Reviews of the Chinese producers left much to be desired. Such devices are generally of poor quality, sometimes they absent function normalization voltage, short-lived and thus have a small value.

Stationary floor stabilizers Hertz (Elix) for use in private homes

Repair their own hands Resanta voltage regulator

Some users on the forums to share information, that in the event of device failure, possible repair of household voltage stabilizer alone.

The current in the domestic electricity supply is changed at a high frequency, respectively, as often occurs actuator rotation, which can damage the engine unit. Excessive friction and heating of the brushes contribute to their deterioration and clogging of wires.

If the instrument is fired the engine, you can go two ways. In the first case, to purchase and install a new engine.

The failed stabilizer Resanta can be repaired in the home

In the second case, the engine may try to restore their own hands. First of all, you must turn off the engine of the overall scheme and connect it to a pretty powerful power source. If the outputs of the stabilizer supply current with a voltage of 5V and a current intensity of 100 mA to 150 mA, all dust particles latching operation, will burn.

After this is done by a simple voltage regulator circuit connection. After such repair the engine resumes operation.

Repair Resanta voltage regulator is to replace or repair the motor

From the reviews it is clear that many users acquire AVR Model Home 10 kW from the company Resanta. In this connection, the manufacturer offers 10 kW chip voltage regulator for review, with the possible failure of the rectifier of this type. general scheme of construction of such rectifiers are similar, except for some elements in a different capacity devices.

For correct selection of domestic stabilizer, follow the recommendations of professionals and producers as well as consumers' opinions on the compliance functions declared rectifiers characteristics.