Before buying a sheet polycarbonate, basically these two indicators are of interest to us - the size of the sheet and the price. Since we stopped on this type of product, it means that we know all its characteristics and application features.
And here on the sizes( linear, thickness) and cost it is necessary to stop separately. This will allow you to accurately determine the required batch of goods, based on the specifics of installation in a particular location, and compare the needs with their financial capabilities.
Typical dimensions of polycarbonate
- 6 and 12( m) - length;
- 2,1( m) - the width of the canvas;
- from 3,5 to 32( mm) - thickness.
Price
The price of cellular polycarbonate is determined by several factors - linear dimensions and thickness, color design, manufacturer. Since the range of products is huge, it makes sense to give only averaged data for sheets of colorless( transparent), depending on their thickness( in rubles / pcs.).
length of 12 meters:
- 3,5 - 2 150 Р;
- 4 - 2 850 P;
- 6 - 4 750 P;
- 8 - 5 650 R;
- 10 - 6 580 P;
- 16 - 11 650 R;
- 20 - 13 300 R;
- 25 - 16 490 P;
- 32 - 18 250 R.
Naturally, the price for similar cloths, but 6-meter, is lower approximately once in two.
Colored sheets are more expensive than their transparent counterparts. The difference lies in the range of 200 - 700 rubles. The thicker the plastic, the larger it is. For example, for products in 4 mm - about 300 rubles, in 16 mm - 450 rubles.
Useful advices for
- When calculating the amount of money you are supposed to spend, you need to take into account the costs of purchasing additional items. Polycarbonate honeycomb, in contrast to monolithic, requires sealing of the ends of products. Plus - docking strips and a number of other components.
- It should be noted that not all Manufacturers withstand strictly defined product sizes. Large deviations from the prevalent parameters( the size of tolerance) are characterized by the products of small firms and "firmochkas".They work, as a rule, in a "semi-artisan" way, and often the technical capabilities of the equipment do not allow achieving higher quality. Unfortunately, and with good faith, many of them are not all right.
Therefore, when purchasing an unknown producer's goods, you must independently make all measurements, and for each product. Naturally, if we are talking about one-and-a-half dozen sheets, because when purchasing a large batch, this is unrealistic. Why is this necessary?
For example, the difference in the thickness of the sheets will not allow them to produce high-quality alignment, to seal the joint. As a result, the occurrence of leaks at the first rain. The difference in the linear dimensions will complicate the installation - the sheets for a tight fit will have to be cut.
