Panel mounting simulating a brick pillar

Every year new materials appear on the construction market. One of the latest innovations is the PICS panels for fence from profiled sheeting, which are deciphered, like panels simulating a brick pillar. The material is of low weight, which completely eliminates the problems of its operation and guarantees a long-term preservation of the fence in the future. The lightness of the panels provides a minimum load on the fence from the proflist.

Advantages of PIKS panels

Unlike conventional bricks, imitating its panels allow the buyer to make a really profitable and economical purchase. Since the installation of the panel that simulates a brick pillar can be carried out by the owner of the villa site, then it is not necessary to spend time searching for the performer. The quality of the installation is guaranteed to be high. Acquisition and self-installation allow you to save a lot of personal money. The buyer will not have to pay for the services of specialists or overpay for building materials.

No less important characteristic of the novelty is the aesthetic appearance. A typical brick pillar rarely has an absolutely flat surface. And over time, the material begins to break up completely: cracks and potholes appear on the surface of the brick column, significantly worsening the appearance of the fence. Such problems are completely excluded when installing PIKS panels: increased precipitation, temperature changes and exposure to sunlight will not affect the shade of the material or its performance.

Attractive panel imitating a brick pillar for fence from corrugated board can be painted in any color. Detailed photos of the material in the finished designs will allow you to quickly select a stylish option. In addition, neat visors are used to simulate a new hedge for completeness.

How to install PIKS panels yourself?

The work by the buyer will take about 40 minutes or 1 hour for the first pillar. To carry out the installation, you need 90 degree corners( with a length in the height of the fence), rivets or screws( selected by the performer for convenience).Installation is carried out according to the following scheme:

1. Corners are fixed to the corrugated board, the distance between which is equal to the inner width of the panel.

2. The first PICS panel is put on the set corners and falls to the very bottom before the beginning of the sheet of corrugated board.

3. With the help of self-tapping / riveting, the panel is attached to the corners( from the outside of the panel to the seam between the bricks).

4. The next panel is put on the corners and installed in the grooves of the bottom element.

5. The second imitation is screwed to the corners in the same way.

6. Work on docking and fastening panels is performed until the desired height of the column is dialed.

7. The final stage will be a tight fit on the top of the construction of a special visor.

After completing the instruction, the panel, simulating a brick column, will be completely ready. The number of individual imitations is chosen by the owner. You can arrange the elements both from the outside of the fence, and from the inside of the fence.

The speed and ease of installation of modern materials, described above, attracts many buyers. Low cost and the possibility of self-installation provide an economical upgrade of the design of a conventional fence from the profiled sheet.

Photo

Video installation

For clarity, we recommend to see the video installation of the panel imitating a brick pole on the fence of corrugated board.