Angle Drill: Basic Parameters for Choosing
This type of drilling machine belongs to non-impactless tools, which makes its design both simple and complex. The use of this type of device is important when drilling a surface located in a remote location. As a rule, there are two types of angular drilling machine:
- Angular rechargeable drill( compact);Angular drill, network( volumetric).
The first type of apparatus is used in the assembly or manufacture of furniture elements and other things. The volumetric tool finds wider application, to which it is possible to carry repair and construction works. Important! Do not use a compact type for construction work, because its working resource is much lower than the network tool.
Specifications
So, what should I look for when choosing this power tool? First, check the weight of the device. In order to work as comfortable and convenient as possible, the weight should not exceed 1.7 kg. For maximum convenience, the drill should be flat, this will allow penetration into narrow spaces.
Considerable is the power of the device and the number of revolutions of the cartridge per minute. These parameters are needed in order to determine the scope of the tool and the diameter of the hole, which can be drilled without much effort. Pay attention to the location and type of buttons, so that they are convenient to use.
Additional tool options, like assistance in repairing
Every modern power tool has additional functions and capabilities, the availability of which in our time can be safely considered compulsory. The reverse function also applies to such possibilities. With the help of the reverse, you can easily release the drill from the hole where it is stuck. As a rule, the angular gear for a drill has three speeds. If the chosen tool has this feature, then its productivity will be much higher.
It is worth recalling about the cartridge, which can be standard and with a fast clip. As a rule, a cartridge with a fast clip is relevant in case of using a drill as a screwdriver. For drilling operations, a standard cartridge is better suited, which is clamped with a special key.
Important! The use of this type of drill is not relevant for screwing, as this process can be performed without the use of a special tool.
Adapters and nozzles for conventional drilling machines
The high demand for corner drills led to the appearance of such an element as the corner adapter for a drill. With the help of such an adapter can be made from a conventional angle tool, which is necessary in some types of repair work.
The drill bit can not be used for permanent use. A simple drill will have a heavy load, which will lead to a rapid failure. In other words, for the constant use of this tool it is necessary to buy it, and not to upgrade the standard type of drill.
Important! When buying this unit, do not forget to pay attention to the warranty documents, because a longer warranty on the tool will allow you to remain quiet for a longer time.
