How to paste and smooth the wallpaper so that there are no bubbles. We prepare the walls before the sticker
At the first stage of gluing it is important to prepare the walls well. If necessary, they need to remove the old coating. Then you should level the walls, plaster and primetovat. If this is not done, then the new coating will emphasize all the unevenness of the walls.
Select wallpaper and glue
Once the walls have been prepared, you can proceed to the next stage - selecting materials. Wallpaper can be: paper, vinyl, non-woven, textile, glass and liquid. The choice of envy from the requirements for quality and appearance. From the choice of glue depends the quality of the finished work, including whether there will be bubbles.
Bonding walls with
wallpaper When everything is purchased, tools are prepared and the glue is diluted according to the instructions, go directly to the gluing.
In order to evenly glue the first cloth, you can use a plumb and chalk to draw a level line of landmark.
Then measure the required length and cut the desired number of cloths, adding 2 centimeters for the stock.
When the canvas is cut, go to the application of the glue. It must be applied as indicated in the instructions either on the wall or on the canvas. And if the wall is made of a good absorbent material, then the glue can be applied to both surfaces.
It is important to give the stripes a little impregnation with glue. The time of impregnation directly depends on their thickness. After they are thoroughly soaked, you can start to glue them to the wall.
The end result depends on the effort spent on gluing. Therefore, we do everything carefully and diligently.
The first canvas glue along the line-landmark. After the strip is already on the wall, you need to smoothly level it and press it with a soft cloth or roller, making the movements from top to bottom. At this stage, you need to make sure that air bubbles do not form. Therefore, if a bubble is seen, then it should be tried to expel it with a cloth or roller. If this is not the way to get rid of it, then we remove the strip to its level and paste it again, expelling the air.
So do with the rest of the canvases.
The final stage of gluing wallpaper without bubbles
After the work is completed, it is important to observe one temperature regime and not allow drafts, otherwise bubbles may appear.
If, on the still low walls, bubbles are seen, then this is not a cause for concern. Since these glue residues, after they dry up, are usually leveled.
How to remove bubbles on wallpaper using a medical syringe after drying
If the defects in the gluing are found after the drying of the cloth, then this is no reason to despair. You need to equip yourself with a medical syringe with a needle, glue and a soft cloth or roller.
The bubble needs to be pierced with a needle and ironing it, to expel the air. After that, fill the emptiness with the syringe with the glue. We distribute the adhesive with a soft cloth or roller, and wipe the excess with a wet sponge. After drying from the bubble there will be no trace.
How to remove bubbles on wallpaper with a sharp blade
This method is not desirable for use, but if you have a choice: use it or paste all the walls, then, definitely, you need to try.
To remove bubbles, you need a sharp blade to make an incision at the bottom of the bulge. And fill the bubble with glue using a syringe, smooth out the roller.
In place of the cut can remain a noticeable seam after drying, so for starters, it is better to practice in places behind furniture.