Latex paint for walls - we study
This variety differs from the rest by its basis, it can be seen from the name. It is not necessary to invent complicated formulations, this is the same acrylic, but with the addition of new polymers that give it special properties. Latex paint is much more resistant to moisture than its relatives, so you can finish the walls in any room. When using this type of decoration, a thin film of varying degrees of haze is formed on the wall, the variation of this parameter is the main advantage of the paint.
The fact that latex paint for walls can be superimposed in a thin layer means not only saving, but also its inability to hide surface defects. Therefore, it is necessary to take care of good preparation. Although this can be used for good, for example, for applying to special wallpaper for painting, keeping all the smallest details of the texture.
Latex paint - how to make a choice
Choose a material - it does not mean to decide on the color in which you want to paint your walls. This paint has parameters that you need to pay special attention to when buying. Let's start with the main quality, for which it stands out in a separate form -
degree gloss .A high level of gloss is rarely used, all the same, the walls, almost reflecting mirror any bright light, will gradually start to bore every person who is in the room. Unusual and common is a latex paint with a matte effect. Sometimes it will even be almost a silky surface, while not marking and wear-resistant.The next parameters are the moisture resistance and durability of .In order to evaluate them, you need to look for a package number of cycles of abrasion. For moisture resistant paints, these will be cycles of wet abrasion, for non-wear resistant paints - dry abrasion. For walls, this figure must be at least 3000 cycles. This parameter can also be expressed as a class, so, class 1 will be the most persistent.
The next thing we look at is thixotropy and hiding power of .The first concept is responsible for the presence of stains on the walls, that is, how quickly the paint thickens after application. If she does it slowly, then you have a divorce. The second indicator determines the paint consumption to create a normal coating, so that a film without a tear is obtained. This basic nuances for the selection ends, now you can consider the principle of its use.
Latex paint - how to work?
It has already been mentioned that needs a well-prepared surface, because such trim will accentuate all irregularities. If you do not paint on wallpaper or decorative plaster, then well trim the walls, priming. After all the preparatory work, the wall must be extremely dry and clean. You can not put it on oil coatings that can peel off, and a porous surface is also undesirable, it is better to prime it, because even a few layers of latex paint will accentuate the entire texture.
Apply paint to the walls using all existing tools - roller, brush or spray. The room should not be cold, at least 10 degrees. The first layer should dry well, for this it will take a couple of hours. Then the second layer is made and the process is completed.
Latex water-based paint dries in 20 minutes, so the second layer does not take long to wait. Completely it is ready for operation for an hour, besides practically does not smell.