The main characteristics of the
hpd pipe The material for creating the HVT pipe is chlorinated polyvinyl chloride. This material is an amorphous thermoplastic, which is formed as a result of additional chlorination of polyvinyl chloride. As a result of this process, pvc acquires additional characteristics and becomes stronger, acquires less thermal conductivity and resistance to the impact of a variety of chemicals.
Chlorinated polyvinylchloride pipes are a worthy replacement for existing materials for the installation of various pipe lines. They favorably differ from those of other substances by a number of indicators:
- Possessing high bandwidth. To achieve such a parameter, this type of product can have a large operating pressure threshold( PN 10, PN 16, PN 25).
- Presence of high resistance to existing dangerous bacteria. This type of pipe is widely distributed in medical institutions due to the fairly easy maintenance of sterility.
- Pipelines made of polyvinyl chloride are versatile in application. They can be used in such pipe communications as: water supply, gas pipeline, heating systems, drain water communications.
- Ease of installation. To work with pipes xpvx when installing them requires a minimum of tools, resources and physical effort.
- This type of pipe communications has a low thermal conductivity, about 240 times lower than that of iron pipes. This makes it possible to significantly save on thermal insulation.
- High fire safety. Networks made of polyvinylchloride do not support combustion, do not melt or drip. After the direct contact with the open fire ceases, there is an independent attenuation.
- Longevity. At observance of all necessary norms of operation this type of tubular products can serve till fifty years.
- High strength material. HVW pipes have a high coefficient of resistance to mechanical influences.
- Actual ease of the material. This indicator greatly facilitates the process of transportation and operation.
All of the above factors indicate a large number of undeniable advantages of PVC pipe communication over other existing ones.
Features of mounting xpx pipes
One of the biggest advantages of using this type of pipeline materials are the features of their assembly. The fact is that in order to connect the pipes between each other, no heating elements, no docking materials, no welding apparatus are required. All these cumbersome and energy-intensive tools can be left in the past. For the installation of hpvx pipes, only an ordinary hand hacksaw and a jar with special glue are needed. Glue, in itself, is polyvinyl chloride, with only a slightly modified formula. Also with the help of it, it is possible to perform the overhaul of the pipe network.
Specification of piping installation with the help of
hdp pipes. In the manufacture of PVC pipe products, manufacturers mean the manual assembly of existing materials, so the installation of this equipment is quite simple. The creation of a pipeline system from the presented products is carried out in several stages:
- Schematic marking of the proposed location of the pipeline components.
- Measurement of prepared pipes in accordance with the created scheme.
- Cutting the tube into the corresponding parts using a manual hacksaw.
- Preparation of a certain number of corners and fittings for turning the network in accordance with the developed scheme.
- Mounting the pipe with a special glue. This process occurs by applying a PVC glue to the elements that need to be bonded, and their interconnection by hand. Then it is necessary to allow the newly created pipe assembly to dry for a few minutes.
- System check. After cutting and connecting the elements of the pipeline, it is necessary to feed water from an external source. If any type of leak is detected, it is necessary to eliminate them by applying a special glue, or a lacquer, to the place of leakage, which can easily be cut from the remaining pieces of polyvinyl chloride material.
Thus, in the article were added all the advantages of using in the installation of piping systems of HPW pipes.
