The tubing in the tub was hammered: the reasons for the trouble
The most common reason is the improper operation of the sewage system and careless handling of the bathroom. Often, the cause of the blockage are the remains of threads, hair, animal hair, buttons, small parts from toys, fish scales, bird feathers, etc. All this is collected in a tight lump and clogs the drain.
Also the lack of preventive measures is a common cause of blockages. Sometimes blockages occur due to errors made during repair( incorrect pipe slope) or due to accidents on communications( freezing, broken pipes).
The air vent will help to eliminate blockage in the bathroom
When using this popular device, remember that it is more difficult to clean the bathtub than, for example, a washbasin. This is due to the fact that for effective operation of the air intake we need a vacuum. And in order to create it, you need to close the overflow opening of the bathroom tightly with the help of a second plunger or scotch tape. Rags in this matter is not useful: the air will still pass.
Cleaning the clog with a plunger:
- fill the bathroom with water so that it covers the rubber bowl. The flow of water is more effective than the flow of air, pushing debris;
- install the plunger so that the rubber bowl completely covers the drain;
- do about ten vigorous rolls;
- rinse with plenty of water.
For reliability, the procedure can be repeated.
Cleaning the siphon
If the plunger does not help, flush the siphon:
- , place a cloth under the siphon on the floor, put a basin on it to collect dirt;
- gently unscrew the bolt nut and remove the flask;
- wash the siphon well from the inside, removing the deposits from the walls;
- assemble the structure back. At the same time, the drain pipe must not rest on the siphon flask, so that the water trap does not break;
- check the tightness of the connection by turning on water. Also fill the water trap.
How do I clean a pipe in the bathroom? Plumbing cable
Cleaning procedure:
- end of the cable insert into the drain hole;
- rotating the cable, gradually push it forward. This work is more conveniently performed by two people: one rotates, and the other - directs;
- after the cork is broken( with the cable going easier), do a few forward-back movements;
- remove the cable and wash the drain.
If necessary, repeat the procedure.
How to remove blockage in the bath: chemical methods
Before use, read the instructions and make sure that this chemical is suitable for pipes installed in your apartment. Also for the bathroom, select a sample that can dissolve the hair. Then use it according to the instructions. Wait a while for the chemical to react with the blockage. In the end, rinse the pipes with hot water.
You can also use baking soda and vinegar. A batch of soda and a bottle of vinegar will give an effect similar to that of a chemical. Place them in the tube, wait for the reaction and use the plunger. Rinse the pipe with hot water.
Prevention
In any case, it is better to conduct prophylaxis. After all, prevention is an important condition for maintaining normal sanitation. To do this, clean the pipes every month with acid or alkali. Use the plunger regularly. From time to time, use soda with vinegar. Try not to let any debris into the drain hole.
And the sewer in your apartment will always be in perfect order.
