Preparatory stage
Before starting to work, you must first determine whether it is possible to re-door the door. This can be done if there are special stubs and swivel hinges on the opposite side of it. The additional fastening elements required for this process are usually attached to the refrigerator assembly. If these are not available, you need to purchase the relevant parts of the manufacturer's desired company.
It is necessary to prepare a flat and cross screwdriver, several wrenches. Then the device is disconnected from the network and all shelves and jumpers are removed. Use a flat screwdriver to remove the plugs from the bolts, remove the handle, then remove the fastener. To avoid deformation of the lower hinge, it is necessary to hold the door after removing the upper fastener. After the bolts are unscrewed, the doors are removed.
Door reclosure: instruction
- Before re-weighing the door of the refrigerator, you must install mirror-mounted rotatable fasteners or use the parts provided in the kit on the other side of the door leaf, after which the holes from them are covered with plastic plugs.
- The door fits neatly into the lower bracket, then screw up the top and adjust the tightness of its closing. If necessary, reset the open door sensor.
- The handle is put in a new place, the shelves are returned back.
Features of retracting the
- When detecting the possibility of re-weighing the doors, it is immediately necessary to determine whether both hinges installed on the door are suitable for mounting them in a mirror position to the other side of the door, if necessary, you can make the necessary holes yourself
- If the refrigerator is two-door,what type of attachment do the doors have? A separate attachment allows, if necessary, to outweigh only one door, and simplifies the installation process, and with the combined fastening the process will be abouttoyat a bit more complicated as it is necessary to remove the two flaps simultaneously
- Some models are inside the loop of decorative elements that are changeable front doors must be removed, and then get to work.
- If the door has a control panel display, the override of the door will be accompanied by the disconnection of the special cable that is located at the top mounting, after which it will be necessary to remove the top cover of the refrigerator, providing access to the panel itself, after which the cable moves and the process follows the instructions given.
Before you outweigh the refrigerator door, you need to consider the availability of all necessary materials and tools, and after the installation is completed, carefully adjust the density of the door closing.
