Those who follow the technical innovations and( or) try as comfortably as possible to equip their life, such a "smart" device is obviously interested. What is a touch mixer for a washbasin and how does it differ from traditional models? Is it worth it to buy or such an acquisition - a senseless waste of money? This article will provide the reader with an exhaustive answer to all such questions and useful recommendations on the choice.
The sensor type mixer is a device with contactless control. Not to be confused with electronic counterparts!
The device and principle of functioning of the
sensor mixer. Such a device differs from the usual lever or faucet models of mixers by the complete absence of mechanical controls( with the exception of temperature control on some models).In fact, this is just a spout, on which a sensor is installed that reacts to movement in the sensitivity zone. Since the nozzle of the mixer "looks" into the sink, it is enough just to put hands under it and water will flow. But if they are removed, the fluid flow will stop.
Features of the
touch mixer Before buying such a mixer, you should evaluate the feasibility of installing it in the house.
Pros
- Automatic temperature maintenance at the level of the set value.
- More rational use of water. For example, when brushing your teeth, washing dishes. Consequently, its daily consumption is markedly reduced.
- There are no such structural elements as valves( crane-axle boxes), gaskets. They most often fail and require repair of the mixer or its replacement.
Cons
- The touch mixer is not always convenient to use, since at least one hand must be in the "visibility" of the IR sensor.
- There are difficulties when you need water from the tap, then hotter then colder. This is what is required when washing dishes. Hence, it will be necessary to constantly reconfigure the sensor mixer or go to another point of draw-off.
The last thesis suggests that even in the "smart house", and even more so, the apartment, you should not change all the mixers in the housing on sensor models.
Tips for choosing a touch mixer
For those who still decided to purchase a touch mixer, it is necessary, first of all, to study the documentation attached to it. What to pay special attention to?
Spout form
Is this model suitable for a previously installed wash?
Limits of sensitivity zone
In general, it is from 1 to 30 cm. It is necessary to relate this characteristic to the depth of the dishwasher bowl so that it does not turn out so that as soon as a dirty dish is lowered for it, the water supply automatically turns on. Therefore it is more expedient to buy a mixer of sensor type with the possibility of self-adjustment of sensitivity.
Temperature control
To what extent, how convenient? For domestic use of the mixer - important questions.
Manufacturer
An important factor if you consider how intensively the mixer is used. We use this device daily, many times. Therefore, if you spend money, you should be sure that the plumbing is really quality and will last for a long time.
But about the various "bells and whistles" opinions are different. Someone considers additional options( remote reconfiguration of the mixer and control) a plus, but for some it is nothing more than an excess that significantly increases the cost of plumbing.
By the way, about the price. It varies widely, as the range of sensor mixers is quite impressive. You can buy a model model for 5,450 rubles, and there are "exclusive" devices and 59,000.
Here, perhaps, and all the main points. Producers constantly refine something, improve, so it is unrealistic to follow the various "innovations".There is a passport of the device, in which there is all the information, and the author explained the nuances of the device and the choice. Only to make the final decision about the expediency of buying such a mixer only to you, dear reader. Good luck!
