All the obstructions in the toilet are caused by two main reasons. The first is that something "big" got into the pipeline and got stuck there. One of the examples when, after washing the floors in the toilet, along with the dirty water, the floor rag also "floats away".By the way, this is not so rare. The second reason is a reduction in the diameter of the sewer pipes. This is a natural process that happens all the time. On the inner walls various layers are deposited, which prevent the passage of that which falls into the toilet. This, so to speak, theory. Now about practice - how to eliminate the blockage in the toilet?
Determine the clogging of
The first step is to determine whether the water passes or the "channel" of its passage is clogged "tightly".To do this, you need to drain a little water in the toilet. Just do not do this with the help of a drain tank. The tank if it began to "drain" the water, it can not be stopped. And it can happen that the good half of this water, together with the dirt from the toilet, will be on the floor of the toilet room. Pleasant, of course, a little. It is necessary to fill a bucket or a pan with water and slowly drain it - then it will immediately become clear whether it passes or not.
In addition, you need to see if the water comes from the bathroom, from the sink in the kitchen. If everywhere the water "leaves" normally, then it means that the section that connects the toilet bowl to the common sewage pipe is hammered. If it does not work, it's in the pipe. In this case, you can try to use a tool - a plunger. Such adaptation is in every house. It will be more convenient to work in the bathroom. Previously, you need to tightly seal the hole in the sink, the opening of the upper drain in the bathroom and close the lid tightly, putting something else heavy on top. Sometimes this method helps to break through the place of blockage.
Let's assume that the situation is the same - the water in the bathroom goes away( the toilet is hammered).If the water still slowly comes down, then you can try to remove the blockage with the use of some chemical composition that is in the house. Most often, the housewives have in stock a special tool "Mole" or something like that. You can use vinegar and soda. After the necessary time has expired, it is necessary to pour the toilet bowl with hot water. And drain the water should be gradually, in parts. Hot water promotes softening of the substance that formed a jam( if it's not a rag, of course).
Do this several times. Perhaps in this way it will be possible to gradually move the "plug" to the common sewage pipe. And since it has a larger diameter, then this "plug" will simply go through the pipe system. This work takes time, but it's worth it.
Reliable tools
But still the most reliable device for cleaning any pipes is a special cable for working with plumbing fixtures. Unfortunately, on sale, for some reason, it is rare. If not in the apartment, you can ask the neighbors. To shy here does not make sense. It must be taken into account that this cable is quite flexible. It is specifically done precisely in such a way as to "get through" to the most inaccessible places.
The drain pipe, which extends from the toilet, has a certain configuration - it has a bend. This is done so that there is water all the time in these places. It prevents the ingress of various odors into the room from the sewage system. Therefore, using a rope, it must be rotated all the time. Otherwise, he will restrain himself and begin to amortize, and then he will not go on the pipe.
Before you start "active" actions, you need to check the very beginning of the drain in the toilet. You can put a rubber glove on your arm or make a wire hook. Perhaps, at the very beginning of the "channel" a sponge really got stuck, a rag that is easy to pull out - that's the whole solution to the problem. And the most extreme case - to unscrew the toilet and check the place of connection with the outlet pipe, but this is rare.
