It's very pleasant to have dinner with your family in the open air in the summer heat while enjoying the fresh air and chirping of birds. For these purposes in the country house in just a couple of days you can build a cozy summerhouse from a wooden beam. This article will cover all the issues related to the construction and given a step-by-step instruction of the main stages of the work, to get a decent gazebo from the bar itself.
Contents
- Drawings of the
- gazebo Basic stages of the construction
- Final work
- Construction of the gazebo from the log with your own hands
The main thing in this process is to have a positive attitude and follow all the tips given below. For completeness of information on how to make an arbor from a bar, on our site the full photoreport of construction is presented.
Drawings of a gazebo from a bar
First you need to choose a suitable place for a gazebo. It should have a flat surface without bumps.
Then we turn to the drafting of the work. The arbor for a dacha from a bar can have the various form and overall dimensions, and also different design registration. It is desirable to determine and with the internal filling of space - the location of the table, benches, installation of barbecue and other elements.
To avoid unpleasant surprises and inconsistencies, it is advisable to sketch out a diagram of the gazebo with the dimensions applied. According to the drawing, it will be much easier to calculate the number of necessary materials and determine the order of work. Building a gazebo out of the beam will be much easier with a clearly planned instruction and the availability of all materials and tools.
The main stages of the construction of
We will consider the construction of a square arbor from a log with our own hands measuring 4.5х4.5 m. The gazebo is installed on a columnar foundation of strong concrete blocks.
First, you need to perform an accurate marking of the perimeter of the object using pegs and rope. To make the square a regular shape, you need to check the dimensions of its diagonals. They should be the same. It is also necessary to check the perpendicularity of all angles and only then to install foundation bars. They should be on one level from the ground and form an ideal square.
After this, proceed to erect the base of the arbor. For this we will need wooden beams 100x100 mm and floor logs 50x100 mm. To provide waterproofing between the foundation and the beams, the roofing material is laid.
The flooring floor slots must be stacked every 40 cm so that a sufficiently rigid structure can withstand significant loads. For their fastening to a wooden frame it is better to use special metal corners and screws.
After this, we proceed to install vertical racks, which will rely on the upper skeleton of the roof and the construction of the walls of the arbor. The options for decorating the walls can be very different in any form, the main thing is to control the strict perpendicularity of the walls relative to the floor of the gazebo.
After the pasture of the walls of the desired height, the most complicated process of building the roof frame begins. For binding, it is better to use solid bars in order to get a sufficiently strong construction.
The roof frame can be assembled in different ways to give the desired shape and height as desired.
Roof roofing is made using wooden boards or large plywood sheets. The first option is much more time consuming and requires more time. On top of the wooden cover lay a layer of roofing material, and then a choice of either bituminous shingles or wood shingles.
Final work
After the main work on assembling the gazebo out of the timber, the final design stage comes. There comes the turn of flooring. To do this, it is better to buy special boards for outdoor use, which are resistant to wet conditions. All boards are fixed with self-tapping screws at both ends.
Inspect the result of the work done and eliminate all the defects, covering the cracker with crack filler and holes. Then we grind all surfaces with a sandpaper and cover with a double layer of varnish.
The interior of the arbor is made according to the wishes of the owners. Usually it is a wooden table and comfortable benches.
All stages of the work and answers to questions on how to build a gazebo out of a bar are demonstrated in the photo and video materials.
