Waterfall at the cottage with their own hands

Agree, the element of water invariably attracts us. Oceans, seas, rivers, well, who does not love all this? After all, the sound of the bubbling aqua whith gives a sense of peace and tranquility. And if you belong to the lucky ones, who have a small but a dacha, please yourself with the harmony of aesthetics and sound by constructing a small waterfall with your own hands. Do not be afraid, it's not difficult! The main thing is the desire and belief in your own abilities.

Materials

It is clear that nobody is going to Niagara. And even a waterfall in the grotto. But here is a small, chambered such a waterfall, why not? But before you have to acquire:

This is for the construction of a pond. But that vodichka zazhurchala and could be pumped from the lowest point to the top, without a pump in any way. In a word, buy a water pump commensurate with the capabilities of your wallet. For a pond with a depth of up to 1.5 m, a deep-water pump with a power of 700 W is suitable. And let the water murmur, and the eyes are pleased with the beautiful spectacle - a decorative waterfall made by oneself.

The location of the waterfall in the country section of the

So, everything is bought, brought, and the gloves are dressed in their hands. And now gather the household members and decide together where the water will bubble and fall. Do not believe me, the choice of places is perhaps the most difficult in creating a waterfall in the garden.

Why? Yes, because if there is no elevation on the site, or it is not at all where you want, you will have to do it artificially. And the trees growing next to each other will begin to drop leaves into the reservoir and clog the water outflow, "irritating" the deep pump. And even the roots of the trees, then look, will grow and violate the waterproofing. It is also not recommended to erect a fountain near the house, becausewater due to wind can be on the wall of the house, which can subsequently lead to a fungus.

Digging the pit

And only when you decide on the place of the future "dacha nirvana"( taking into account the aforesaid), start marking the perimeter of the pond, without which you can not build a mini waterfall with your own hands.

Of course, this can be a polygon, a square or a circle. But look at the photo of the waterfalls that are on this page. Agree, the smooth lines and uneven shores will give odds to the many Euclidean geometry that is hated. Although, of course, your will: you can make a waterfall in the dacha with your own hands, even in a barrel.

Well, now dig. Fun and at ease. Anticipating the result. If you want to fish in the pond or swim with a hot day, then the depth will have to be pulled out not less than a meter: so the water will not freeze, and the fish and plants lovingly inhabiting the pond will see the spring sun, having successfully survived the winter.

As digging, excavate the soil, leave where the water will flow - create a slide. It will become the foundation of the building, even if until the end you do not understand how to build a waterfall with your own hands. Pulling out the pond-store, remember that 10 centimeters will have to fall asleep with a sand, and even tamper with it.

If the walls begin to crumble, moisten and tamp them. To build a channel for the hose from the engine to the upper point of water fall, make a small groove in the pit wall and compacted ground of the created slide.

Waterproofing and concreting

And then lay the PVC film on the bottom, bed and walls of the pond. Do not forget to put a polyethylene pipe in the channel groove, bending its lower edge 30-40 cm upwards. If one width of material is not enough, do not be greedy, the next strip is overlapped at 50 cm. Also leave about 0.5 m of film on the surface.

And then concreate the bowl of the pond, starting from the bottom. To do this, place neatly the metal mesh there( so that the film does not break), and fill the concrete layer with about 120-150 mm.

While everything is not hardened, after 3-4 hours overlap with the same fitting of the wall of the pond, inserting the lower part of the "side" mesh into the still malleable solution. In a day you can start pouring the walls of the bowl. All the hardest things have been done. And now we begin to decorate the waterfall at the dacha with our own hands.

Cascades and jets

On a compacted hill create level steps-platforms. Begin at the bottom with a step of at least 30 cm. Make at least a couple of ledges. Although the most luxurious waterfall will come when the water begins to fall from a height of 1.5 m. On the horizontal plane, lay the stones.

Flat sandstone or round shingle, it's up to you. As a result, water will flow through these cascades, and please with its brilliant sparkle and measured noise. But to delude yourself early: you have not finished the work on the self-construction of a waterfall of stones.

After all, on the perimeter of the pond lies unsightly film, which is also good to hide under the gifts of the Copper Mountain mistress. Therefore, lay out there at least some cobblestones, even boulders, at least sandstone, even marble stones, but turn your waterfall masterpiece into a sample of landscape art.

And when all construction work reaches the finish line, connect the pump and. .. fill the pond. Feel what the winner feels! Admire yourself! And tell everyone in the world that the construction of waterfalls with their own hands is as simple as all ingenious.

But if you suddenly have any questions, or you are a visual, check out the photos and videos that will clearly answer the question: how to make a waterfall with your own hands.

Video of building a waterfall with your own hands