Partitions for the bathroom

During the redevelopment or planning of the bathroom design, the question arises about the partition. Zoning rooms - a common method of optimizing a small space.

Low partitions are most often used for limited visualseparation of the toilet area from the shower or bath. High zonal partitions, have their own positive design solutions. In any case, the partition solves many problems of bathroom design.

Types of partitions for the bathroom

For the partitions in the bathroom, any moisture-resistant materials are used. When selecting material and planning the partition, consider a combination of design with the general style of the bathroom. The weight of the partition makes a difference if the bathroom is located on the upper floors.

1. Brick classic partition , has a number of advantages and disadvantages. The bricks partition is economically profitable, the costs for materials and work are very small, but the brick partition has a significant weight.
2. OSB plate , are used for the construction of light partitions. When choosing these materials, consider the increased humidity in the bathroom and the poor sound insulation of such partitions. Choose a waterproof OSB plate, 6 - 8 mm thick.
3. Moisture-resistant plasterboard , one of the best materials for the partition in the bathroom. With its use, you can implement any design solution. For example, make openings for glass blocks or combine with other materials.
4. Glass partition - requires special glass and appropriate interior design. Stained glass, resistant to mechanical damage and not dangerous when fighting. Glass partitions can be either transparent or tinted. Such partitions are made under the order and installation are performed by the manufacturer's manufacturer.
5. From the glass blocks of are made beautiful monolithic partitions. To erect such a septum is capable of even an inexperienced master. The big plus of a transparent partition is the capacity of natural light.

Installation of the

drywall partition. Gypsum board is a simple and easy-to-handle material. For the partition in the bathroom only a special moisture-resistant wallboard drywall is used. After puttying, it is recommended to cover the septum with water-repellent impregnation.

1. A drywall partition between the toilet and the bathroom begins with a marking. Pencil or marker, put on the floor, wall and ceiling the extreme lines of the partition, verified by the spirit level. On the back side of the metal profile, fix the self-adhesive sealing tape and attach the vertical profile to the wall. From it we make bends on the ceiling and the wall. Step self-tapping screws for about three pieces per meter. Horizontally, profile guides are attached, creating a skeleton cage.
2. For the laying of electrical wires or cables at a distance of 25 - 30 cm from the floor, holes are drilled with a diameter for a special corrugated hose. It will protect electrical wiring from mechanical damage and fire.
3. Install a solid sheet of gypsum board and start fixing it with screws from the corner. The heads of self-tapping screws go deep into the body of gypsum board to a depth of 1 to 2 mm, with a step of 20 to 25 cm. To improve the soundproofness or insulation of the partition, the voids are filled with a moisture resistant filler. Foam polystyrene or mineral wool is quite suitable.
4. Joints wired with gypsum board on both sides of the partition, glued with a serpent and shpaklyuyutsya. For external and internal corners, a plastic or metal perforated corner is used. Flexible perforated corner, superimposed on the curved bends of the partition. The surface is shpaklyuetsya and polished, treated with waterproof impregnation and antiseptic. In conclusion, the partition in the bathroom of plasterboard is painted in a suitable color.

Advantages of a partition for a bathroom from glass blocks

1. One of the most aesthetic and popular materials for a partition in the bathroom is glass blocks. Glass blocks are hollow glassware shaped like a 19x19x8 or 24x24x8 cm box. The edges along the perimeter give them special strength, and the glass thickness is up to 8 mm.
2. Glass block has high thermo-insulating properties, is not susceptible to decay and an excellent sound insulator. They are easy to clean and have a throughput of sunlight in the range of 70 - 80%.They do not need to be painted or plastered.

Two methods of laying glass blocks for the partition in the bathroom

From the glass blocks make very stylish and beautiful partitions for the bathrooms. In building stores there is a choice of glass blocks for any most demanding taste. To erect a partition in a bathroom from glass blocks, is very simple.

Wet method for installing glass blocks

1. For laying cement glue suitable for laying tiles, but there is also a special for glass blocks. After marking, before laying the junction place should be cut. Topor put nicks on the floor, walls and ceiling, for a more durable clutch.
2. Masonry of glass blocks is made as well as laying of sand-lime bricks. The difference is that the blocks are stacked by the cage, and not in a checkerboard pattern. Glutinous cement mass evenly laid out on the markings. On the floor for three to four blocks and pounces on the wall 1 - 2 blocks in height. Laying starts from the corner, and after 5 to 6 blocks, a mortgage is made.
3. As a mortgage, you can use an ordinary nail weaving. He is driven into the floor, walls and ceiling half the length in such a way that his head is in the middle of the seam. For more even masonry, plastic crossings are used. After laying out five to six horizontal rows of the partition for the bathroom, let them dry for several hours. Then continue to put on. After the end of the masonry, the partition must stay at least 24 hours, and then you can rub the seams, as well as it is done on a ceramic tile.

Pure method for stacking glass blocks

1. This method of laying involves the installation of glass blocks without the use of cement adhesive. For this, there are plastic, aluminum, polyurethane or wooden frame modules. They are fastened with screws to the wall, floor and ceiling, and in the cells are inserted glass blocks.
2. In the cells, the glass block is fixed with rubber clamping pads. The frame is a transformer and can be given any shape: a square, a rectangle, steps, etc. A modern bath with a partition photo that can be found on the Internet is an ideal solution for the arrangement of space. More details on the dry method of stacking glass blocks, you can learn from the video.