Recently, it is increasingly possible to meet fences made of metal profiles, and in this case it will be natural to install a lock on the wicket from the corrugated board, which can reliably protect the internal territory and will be unpretentious to use.
To date, there is a large selection of a variety of locks, which are suitable for installation on the fence of corrugated board.
Each of them has its own advantages and disadvantages, except for this, all the locks between themselves differ not only in terms of device, but also in their characteristics.
Choosing a lock is quite a responsible matter, which needs to be considered carefully, given the various subtleties and nuances.
Which kind of lock to choose depends primarily on the possibilities, since they all have very different costs. As a rule, for enclosures made of corrugated board, either a mortise lock or an invoice is chosen.
In any case, after the acquisition of the castle, the question of its installation in place will arise. By itself, this work is quite simple, and with the right approach, it can be done without problems with your own hands.
Contents:
- Types and types of locks
- Mounting of the lock type
- Installation of the lock type
- Tips and advice
Types and types of locks
For the installation of wickets made from corrugated board, several types of various locking mechanisms are suitable. The easiest way to close access to the yard from strangers is to hang a padlock.
It is sold in almost any store and all that is required is by welding to make appropriate loops for it.
A significant drawback of this type of mechanism is the relative ease of hacking, and if the attacker decides to open the gate, it will easily do so.
Another type of inexpensive locks on wickets from corrugated board is a rack. It is made in the form of a bolt, it is easily mounted in place, however, it will not be difficult to circumvent it to a professional attacker.
Popular in recent times is the mortise type of the lock, but it can be installed far from all the wickets from the corrugated board.
This lock is easy to handle and easy to install with your own hands.
To reliable enough mechanisms, which is not so easy to crack, is an overhead lock.
This mechanism is optimally suited for a wicket made of corrugated board, it is quite reliable in operation and can be easily installed in-house by hand.
One of the last types of locks that can be installed, including the wicket from the corrugated board, are electromechanical. In the common people they are also called code.
This mechanism consists of an automatic shutter and instrument panel.
Its drawbacks can be attributed to the fact that there is a constant need for electrical power, and even if it has a battery, at some point there may be difficulties.
You can also put an electromagnetic or radio wave mechanism on the wicket from the corrugated board. However, with all the advantages, they have one significant drawback, namely: a fairly high cost.
Some types of locks, which can be put on a wicket of corrugated board, can be seen in the photo below.
Photo:
Mounting of the lock type
Often, the owners of fences made of corrugated board, if necessary to install the lock on the gate, prefer the mechanisms of the overhead type.
This type of lock differs sufficiently high reliability, easy installation and low cost.
Specialty stores presently have a large selection of overhead mechanisms, so there should not be any problems with its purchase.
The principle and technology of its installation on the wicket door made of corrugated board are quite simple, and they can be easily realized by hand.
After the waybill is purchased, the first thing to do is to correctly mark the place of its installation.
It is necessary to accurately mark the position of the mechanism itself, as well as the entry holes directly on the lock box itself.
After the marking in place has been made, the drill is used to drill all the necessary technological holes.
Next, the lock itself is installed, which is fixed to the base of the wicket with screws. After that, the side panel is screwed and the bar with the input holes of the mechanism, if there is one in the kit.
At the final stage, install the handle and other items that are supplied with the lock.
Some locks mean fastening the counter to the wicket by welding. In this case, you will need to use a welding machine.
Installation of the mortise lock type
If the wicket made of corrugated board has two separate webs of a sufficiently large section, then a mortise lock can be installed on it.
Such locks are characterized by a high reliability and durability, besides this they do not require any special care during the operation.
Install such a lock on the gate with your own hands, with the desire and the appropriate tool, will not be difficult.
At the first stage, the lock is marked at the place of its future installation. Further, all required technical holes are drilled in exact accordance with the pre-defined marking.
In the event that one of the frames has a small diameter, it will be necessary to weld an additional box with the necessary dimensions.
Next, from the side of the door, drill holes directly under the mounting screws. It is better if they are outside the box, otherwise it will simply not be possible to put the nuts on the screw.
Next, you must install the strap on the side of the pipe, which will include the tabs from the lock. After this, you can proceed to fixing the place of the most mortise lock.
It should be installed in a pre-prepared place and firmly fastened to the door with the appropriate screws.
At the final stage, the handle is put on the lock and all other additional items that come with the kit.
More details on how to install the lock on the wicket made of corrugated board is shown in the photo below.
Photo:
Tips and tricks
Even at the stage of choosing a lock for the gate, which is covered with sheets of corrugated board, you must adhere to certain rules and requirements.
The first thing you need to pay attention to is a mechanism that must be under reliable protection from the external influence of the atmosphere.
The fact is that the lock is installed on the street, which means that it will constantly be exposed not only to moisture but also to dust.
It is best for the wicket, covered with corrugated sheets, is suitable for a lock type, that is, one that has a key that displaces the inner plates with a shaped configuration.
Video:
In addition, it is recommended to use a lock that can, both open and close from the inside without using a key.
This is due to the fact that in the winter season when it gets into the water, it just freezes and then only the handle will be the only way to open the lock.
You should also pay attention to the design of the lock. It should be as compact as possible, since hanging a massive mechanism on the door at the gates made of corrugated board is problematic enough.
In addition, attention should be paid to the installation of this locking mechanism. All its parts should fit snugly to the base and to each other.
It is not allowed to form various slots and slots, as this can facilitate access to its interior space by moisture and dust.
In the store, every key in the kit should be checked in operation, since after the mechanism has been installed in place, it will no longer be required to replace it.
There are many different types of locks, and which one to choose for wiring is decided by the owner of the house.
Each mechanism has its own advantages and disadvantages, so it is recommended to thoroughly analyze everything before buying.
In any case, the installation of this device is carried out quickly enough, and if you have a certain tool, it is done by yourself.
It is also worth noting that if the mechanism began to malfunction and function improperly, it is better to completely replace it with a new one, and not try to restore it yourself.
