How to properly lay linoleum on a wooden floor: three ways

click fraud protection

Preparation of a floor for laying linoleum

If the wooden floor is in a normal state, then it is not necessary to prepare it specially for laying. The whole process is carried out in several actions and will not require either special efforts or special means. In particular, it will be necessary to implement:

  • additional fastening of boards( laths);
  • cleaning of hills and irregularities by grinding machine( if any);
  • camouflage of the screws of self-tapping screws and nails: first you have to "drown" them in the tree, and then zashpatlevat;
  • puttying cracks, chips and seams between floorboards( in large gaps pre-scoring narrow bars);
  • surface grinding.

If I carried the desire to spend so much time in the preparatory stage or the difference in the height of the floorboards is very noticeable, it is recommended to simply clean the hillocks with a planer and lay the sheets of solid plywood on top of the floorboards. It will serve as an ideal base to lay linoleum on the wooden floor. How to properly lay linoleum on a wooden floor: three ways

Conditions for successful installation of the

coating The air temperature in the room where the installation is planned should be warm and stable for two days. In particular, the substrate should not cool down more than up to 15 degrees Celsius, and the air better let it be warmer - from 18 and above. Humidity also plays an important role. It should meet 40-60 percent.

Ways of laying linoleum on a wooden base

The technology assumes installation permissibility in three ways:

  • without gluing;
  • fixed to double-sided scotch tape;
  • is glued.

Each of the types of editing has its pros and cons, and also has an army of fans. Let us examine in greater detail the impartial opinion of specialists on this score. How to properly lay linoleum on a wooden floor: three ways

No-glue method

The simplest, but not enough reliable way - a carefully aligned coating is simply pressed and thus fixed around the perimeter with the help of skirting boards. Suitable only for small rooms. To do this:

  • linoleum is marked and cut with a margin of 5 cm on each side, and it is cut off exactly according to the shape of the room only after it settles in the room;
  • the surface is smoothed under one of the walls, after which it is fixed with a plinth;
  • for each next wall the cover is stretched so that no waves or gaps exist between the baseboard and the linoleum.

Fixed to double-sided scotch

It is an excellent option to fix the linoleum on the wooden floor without unnecessary trouble, but it is reliable enough. Adhesive tape is located around the perimeter of the room and a grid with a side of a square about half a meter. The main thing is that the upper adhesive side remains covered with protective paper until the coating is directly mounted. When laying the protective tape, I take off meter by meter. How to properly lay linoleum on a wooden floor: three ways

Glue laying

Is the most common option, thanks to a balance of practicality, economy and reliability. For a large room, and at all the only correct way.

On the steps:

  • we mark the material in the same way as for the glueless method;
  • canvas folds in half to protect the front side from damage and open the working surface;
  • on the edge of the fold( of course, incomplete), draw a line with a pencil;
  • apply the adhesive with a notched trowel to the base( floor);
  • wait for the time specified in the glue instructions;
  • put some material on the prepared wooden floor;
  • immediately smoothes the surface of folds and air bubbles first manually, and then with a roller first in the longitudinal and then in the transverse directions;
  • also does the second half of the sheet;
  • if it is supposed to lay several sheets in the room, then the rest are made according to the same scheme, and the flooring is overlapped;
  • seams are gently released from the glue and pressed down by the board, and the load on top to the final drying of the glue. How to properly lay linoleum on a wooden floor: three ways

In principle, this is sufficient for the normal use of floor covering, but the final insulation also does not hurt. Seams can be "welded" in a cold or hot way, which will allow them to serve faultlessly longer. Hot gives a slightly better result, but requires special equipment and skills, so in everyday life, mostly, cold is used.

Conclusion

To lay linoleum on a wooden floor is absolutely simple. It is an ideal combination of materials - warm and practical. However, in order to make the result enjoyable, and the coating served for a long time, the floor should be perfectly even, and surface preparation plays a significant role in the long run.

instagram viewer