A stand for a Bulgarian - buy or make?
Bulgarian stationary is sold in any construction shop. But the cost of this tool is quite high. In addition, you will not be able to use the machine for conventional cutting operations. It is because of the multifunctionality of the cutting tool that the stand for the Bulgarian was invented.
All the charm of such an element, as the holder for the Bulgarian, is that it can be applied as needed. In other words, you can use Bulgar in many ways without having to be attached to a stationary bed. Important! Mounting for Bulgarians should be located in a specially designated place to protect residents of the house from accidental injuries.
The stand for a Bulgarian by own hands is an excellent opportunity to save on a construction tool. But do not forget that for this you need to have certain knowledge and materials. You can make a tripod for Bulgarians from wood or metal, starting from the sphere of application and preferences of the master.
What material should I choose for a tripod?
As a rule, the device for fixing the bulgaria is made from profiled steel pipes. This material is considered the most robust and reliable, which led to its ubiquitous use. But there are some problems associated with the manufacture of the machine from the profile. The matter is that for such manufacture electric welding which is not always available is required.
But if you think about it, almost all the welding work can be replaced by drilling and using strong bolts. This option will be the best, because you will have the opportunity to disassemble the machine. This method can be used by making a wooden fastener for a Bulgarian.
Important! The use of sawn timber for this purpose requires the control of wood, which must be sufficiently resilient and strong.
What do you need to make a machine?
The most important thing in this process is drawing up a competent drawing of the future machine. To do this, you need to study the already ready model, which can be found in stores. It is necessary in order to understand how to fix the Bulgarian. Drawing drawing does not require special skills. It's enough to remove all the dimensions correctly and to accurately remove them and transfer them to paper. After the drawings are ready, you can start preparing the required material. If it is profiled pipes, then you need to cut all the blanks and drill the necessary holes.
Important! Before cutting the pipe, it is necessary to specify all the dimensions in order to avoid damage to the expensive metal.
A wooden stand for a Bulgarian is made much easier than a metal one, which inclines many masters to choose this type. But such a process has its own difficulties, which are related to the deterioration of the material and the quality of its components. It is necessary to take only the highest quality lumber, which will not be subject to deformation during the period of using the machine. To more accurately represent the order of these works, you need to review all the useful information on the Internet, where you can find the drawings of ready-made machines of the homemade type.
