In the process of construction( reconstruction, repair), one of the problems that must be solved by specialists is the protection of materials from direct contact with liquids. This issue becomes especially urgent when carrying out external facing of facades or interior decoration of premises characterized by increased or even excessive humidity. Therefore, the waterproofing of the substrate is an obligatory stage in any kind of work. But there are some difficulties.
First, , this is an additional waste of time and an increase in the cost of construction( repair), as the proper quality of waterproofing can only be achieved by a set of measures, that is, using at least two methods and the corresponding types of products at the same time.
Secondly, , repair of this protective coating is associated with great difficulties, and this sometimes requires quite impressive expenses.
Thirdly, , problems in choosing suitable waterproofing materials, because their application is determined by the specific nature of the work( the base material, its configuration and a number of other factors).
Aquapanels under the Knauf brand allow to eliminate( or minimize) this kind of complexity.
Product Features
-
Versatile application. With waterpanels it is possible to produce both external and internal finishing of the base, and various surfaces - ceilings, floors, walls in baths, laundries, garages, swimming pools, bathrooms and so on. - Convenient attachment - or "landing" on the glue, or fixing screws( on profiles).This guarantees a high speed of installation and a shortening of the work schedule.
- Light weight. The panels are more than half lighter than bricks or reinforced concrete, but almost inferior to these materials in strength.
- Knauf aquapanels do not absorb liquids, therefore, they will not "lead" during operation, they will not crumble or swell.
- Mechanical strength, resistance to external factors, including critical values (or temperature differences), which allows them to be used in any region.
- The possibility of finishing surfaces that have bends, since aquapanels can be bent within certain limits without destroying the internal structure and reducing the strength of the material.
- Smooth surfaces of the plates minimize the preparatory measures before their "finish" finish. And it can be produced by any materials - paint and varnish, tiles and many others.
- The variety of the assortment allows you to select the type of panels required for the particular installation site, which significantly optimizes the costs of the
. The structure of the
aquapanel. All panels are divided into front and outer panels. There is some difference in dimensions and individual characteristics( and insignificant).They are a sheet multilayer( composite) material. The base of the plate is a core made of cement with mineral aggregate. To increase mechanical strength, the panels are reinforced on both sides( fiberglass mesh).All butt ends are evenly trimmed and additionally reinforced with fiberglass.
Technical characteristics of
Only the main dimensions and parameters of Knauf are given, although the product range is quite impressive, and some numerical values for some types of panels may differ slightly.
- Length: 1,2 -2,4-3,0( m).
- Width: 0.9 and 1.2( m).
- Thickness: 12.5( mm).
- The maximum bending radius is from 1 to 3 m( depending on the dimensions of the product).
- Number of cycles( freezing / defrosting) - from 75 and more.
- Weight of 1 m2 panel( kg) - 15( for interior) and 16.5( for facade).
- The minimum temperature of use is -50 ° C.
Information about Knauf products
Obverse:
- Plate type.
- Manufacturer.
- Marking for fasteners.
Rear:
- Date of manufacture.
Price
As the structural composition and manufacturing technology of all kinds of aquapanels "Knauf" are unchanged, the price is determined only by their dimensions and starts from 670 rubles. For example, a sample size of 1.2 x 0.9( m) is approximately 825 rubles.
Note
Do not confuse aquapanels with Knauf-Superlist products, which are nothing but moisture-resistant plasterboard. Not to mention the fact that such sheets can not be mounted outside, they are inferior to the plates in mechanical strength.
