Before you start, you need to wash the floor well. It should not contain dust, dirt or small debris. When cycling from the floor, the first layer will be removed. For this you will need a special tool. You can buy a belt sanding machine in a construction shop: of course, you can do the same with sandpaper, but it will take you a lot of time and effort. When purchasing a grinding machine, buy at the same time and replaceable tapes for it.
Working with the floor, wear soft socks. If you have shoes on your feet, you will scratch the cover.in this case, the work will have to start again. It is not allowed to use even slippers with a seemingly soft sole, since they also damage the unprotected coating.
Self-leveling of parquet
Before closing the floor, it is necessary to close the doors in the room. When working, there is a lot of dust, so it's best to wear a respirator. Doors are closed so that the dust from the work does not get into the corridor and other rooms.it will be difficult to clean off the carpets. When working with a machine, you should not have hanging clothes, the machine can tighten it while working, the same applies to hair and beard.
Circle should be done along the wood. See where the fibers of the material are directed, and move in the same direction. Otherwise, you break the structure of the tree, and you will not be able to do the looping well.
The machine should be carefully held. Do not put pressure on it so that there are no depressions in the floor. It will be extremely difficult to get rid of them, if at all possible.
Parquet sanding machine
When working with the grinder, do not hook the wire. Otherwise it will be damaged, and risk of short circuit or electric shock is likely. If the machine found on the wire, turn it off and check the wire. If necessary, it can be insulated with a special adhesive tape.
If the floor is a board, then before starting work it is desirable to align it, eliminating the "steps".
It is extremely difficult to achieve an ideal flat floor, it is not necessary. The main thing is that it should become smooth, and it was pleasant to walk on it.
For leveling boards use first the skin number 40. It has a large peas and copes well with irregularities.
After the board drops are leveled, you can proceed to their processing with a finer grain finer. This is good for number 80. Such skins are erased very quickly, because of this they will have to be changed often enough.
The complexity of the work depends on which tree your parquet is made from. If it is soft rocks, then it is easy to work with them, if hardwood parquet, then the strength will be much more. It is impossible to get rid of knots. To achieve perfectly smooth boards you will not be able anyway. This is not necessary, since at the stage of varnish processing, slight irregularities can form.
Particular features of
hardwood parquet sanding Parquet sanding and sanding is not the most difficult procedure, however it may require certain skills, and you will definitely need a special tool. Most often, they are different grinders. They do not need to be bought at all. Many construction shops hand over tools for rent, so it is most convenient to use such a service. This will significantly save your money compared to buying equipment that you only need once. For garbage collection it is best to rent a construction vacuum cleaner.
- Before you get started, you need to free the room from all the furniture on the floor and remove the plinth.
- With the help of a sewing machine you will need to remove the old varnish from the floor surface. It fades from time to time, has damage and just prevents it from reaching the floor itself.
- In the drum of the machine you need to put sandpaper number 40. When working you need to move perpendicularly with respect to the installation lines of the parquet. Do not remove the layer more than 3 mm at a time.
- After this stage of grinding is completed, it is necessary to pass along the parquet with a flat grinder. Your task is to make the floor smooth and, if possible, align it. The number of sandpaper should be gradually increased. Starting, for example, with the fortieth, follow the sixtieth, until you reach the hundredth.
Parquet sanding machine
These tools will not allow you to work in a corner. It is not necessary to remove the parquet. Arming with a grinder for working with corners. Before you do something, make a hole in the gap. To make the putty places unnoticeable, add parquet dust to the putty. Then it will become the same color as the floor.
When the putty dries, you can proceed to further work.
You will need to process the putty places with a sanding machine, dressed with sandpaper number one hundred. Before varnishing, remove all garbage with a construction vacuum cleaner. It is quite powerful, so there should not even be dust on the floor.
The process of applying varnish to the
parquet. The varnish is applied in three layers. Do not hurry. The first layer of varnish should dry well, only after that it is possible to apply a second layer. When the second layer dries, treat the floor with a grinder filled with sandpaper with fine grain. Remove the dust and apply a third coat of varnish.
