Why do we make plasterboard fillings?
To provide quality repair without preliminary preparation of surfaces to the application of the final coating is impossible. Any construction company and decorating workers will confirm that the walls in 80% of homes, whether old or relatively new, are twisted and are not in the best condition.
Drywall is a building material that allows specialists in the field of repair to quickly build incredible designs and functional elements. These can be podiums, niches, suspended ceilings, partitions and decorative windows. Putty putty - a treatment option that allows you to remove irregularities, scratches, small depressions and defects, which usually remain from the movement of furniture or high humidity of the room.
Professionally made plasterboard putty, the video of which can be viewed immediately after reading, helps to turn the element into a part of the wall, so working with it becomes much more convenient. When deciding to work with plasterboard and putty simultaneously, you need to enlist the support of specialists, listen to their advice.
Drywall, despite its relative strength, remains a rather brittle material. It quickly absorbs water, so putty in any case can not be done too liquid. Do not apply a thick layer of the composition. Self-made plasterboard putty is not always worse than the work of specialists. So, you need to note for yourself certain features of the material and remember them in the process of work.
We prepare carefully for the work of
. Any shpaklevochnye work is carried out using a convenient bucket, from which will get a thick solution, and spatulas of different widths and sizes, depending on the scale of work and professionalism. Some procedures, such as plastering the corners of plasterboard, require special care, because afterwards on the painted surfaces all irregularities appear particularly clearly.
Using a small spatula, apply a part of the composition to the wall, flat tools will allow to correctly distribute the putty, thus, centimeter by centimeter, you not only hide noticeable defects of the wall, but also perfectly align it.
Large spatulas and tools with special teeth will help to level the surfaces, the curvature of which is "more than normal".Usually with such spatulas work when the room requires major repairs. As in such cases, putty plasterboard is made, - the video will be able to answer this question.
We proceed to putty plasterboard
After preparing everything you need, you can start finishing. Even if you do not know what the technology putty plasterboard, then in fact you will make sure that everything is clear and simple.
At the beginning of the work the room is prepared: furniture and small things are completely removed or moved in one corner. Polyethylene is spread on the floor, instead of it you can use ordinary food film. Putty in the bucket or prepared for work. If the work passes with the liquid composition sold ready, it is enough to open the package or jar.
Direct plastering of gypsum board joints and the rest of the surface can be carried out over the entire canvas or locally, in places where irregularities are visible, there are joints of the elements or holes that will be used after the repair.
Putty is applied in small batches in neat strokes, after all the composition is distributed on the surface, you need to wait for it to dry completely and proceed to another stage of repair - pasting drywall wallpaper or painting.
