Tree on the wall with your own hands

It is widely believed that the ever-expanding range of finishing materials should gradually supplant and eliminate outdated options, but in reality everything goes wrong. Traditional solutions are modified under the influence of modern requirements and appear before buyers in a completely different light. As the most illustrative example should lead to wood. To what, it would seem, the usual material, but over time, not only not lost, but also strengthened its position.

To date, interior decoration using wood is considered an extremely stylish design option, as wood is not only aesthetic, but also environmentally friendly. Some people mistakenly believe that the only available option is wall decoration. In fact, there are a large number of alternative ways, which will be discussed below.

Finishing with

To date,and the construction market offers a large number of boards of different types: facade, deck, parquet. The latter option is most popular. The demand is due to several reasons.

Advantages of the

1. material It is simple to manufacture because the variety of different types of wood is used for production: from ash, maple, beech, larch to cherry, cherry and pear.
2. A wide range of shades allows you to choose the right option for each interior. You can buy wood of a light shade, but you can find a material of deep dark color.
3. Each of these types of wood belongs to high-quality breeds and has excellent operational characteristics.
4. Parquet boards as a decorative material for walls look good in the interior.
5. Price accessibility of parquet boards allows you to design a large room without significant financial costs.
6. In addition to "decorate" the wood can be using special stains and wax impregnations. They will not only prolong the service life of the material, but will also improve the appearance.

Finishing with solid wood board

Competent surface planking with solid wood planks allows you to get a spectacular interior, which will be the reason for envy of all friends. The use of special impregnations, made on the basis of wax and oils, gives the boards a look resembling velvet. In addition, these tools allow you to create a film on the surface of boards, repelling water, which prevents the development of fungus and mold.

Block-house for wall covering

Some owners of apartments strive to make their homes original and in some ways even extravagant. So if you are tired of boring solutions, then pay attention to the block house, that is, the board, whose section imitates the round log, known all over the countryside. With the help of this material, you can achieve at home a real "rural" interior.

In order for the design to look even more impressive, it is recommended to resort to such a method as the artificial "aging" of the tree. To do this, the most commonly used method is "brashing", that is, processing the material with a wire brush. During the processing of wood from her fibers are removed, which creates an interesting relief. After this, the material is painted and, without allowing the paint to dry, remove it.

Walls are laminated with their own hands

Tools:

• simple pencil;
• ruler;
• silicone;
• screwdriver;
• screws;
• adhesive;
• block for punching laminate;
• electric jigsaw;
• hammer;
• moldings;
• of the sill.

Laminate for

walls This method seems to be the simplest and does not require additional skills. To facilitate the task, it is recommended to collect the boards from the purchased panels in advance. It is necessary to densely smear the "sides" of the panels with glue and glue the elements in such a way as to obtain full shields. It is them that we have to fix on the surface of the wall. It is important that it is prepared in advance. It will not be superfluous to draw the markup.

The only thing to remember for a successful result: the work should start from the bottom left corner. It is recommended that you remove the platbands, which are then installed in the old place.

Laminate on the lath

Stage 1. We perform the necessary measurements, calculate the amount of laminate, as well as the number of moldings and other parts that will be needed for fastening.

Stage 2. Using a ruler and a pencil, we put a marking on the wall surface.

Stage 3. Remove from the doors and windows trim.

Stage 4. Mount the crate, that is, the frame. This is done quite simply - take the wooden bars and attach perpendicular to the floor, but parallel to each other at a distance of 40 cm.

Step 5. Begin to carry out the installation of the material, as already mentioned above, from the bottom corner of the left side of the room.

Stage 6. In the corners we cut the wood with a hacksaw or electric jig saw
Stage 7. We place the staves in staggered order.

Step 8. We process joints with silicone.

Step 9. Snap the locks.

The technology of laying a laminate on the wall is really very simple and will not cause any difficulties.

Wooden wallpaper

Wooden wallpaper is an alternative to finishing with real wood. A paper base is used as the basis, and special wood veneer is applied to it. The material is sold in rolls.

The cost depends on many factors, but the main criterion is the price of raw materials.

The process of gluing wooden wallpaper on the surface of the wall is little different from the technology of applying conventional wallpaper. Only the result differs, because in the end we get a wall that looks like it was trimmed with a tree.

Wall decoration with a saw

One of the most unusual and popular variants of interior design for today is the finish with a saw. The transverse section of the barrel of a small thickness is used as the main decorative element. This method of decoration is so popular that by now the manufacturers have already started producing wallpapers and tiles that simulate such a pattern. Decorate the walls with a log cabin in the room is very simple.

First of all, it is necessary to decide what area you want to occupy by cross sections. Experts do not recommend zealous, since an unusual kind of decoration on a large scale can only spoil the interior. The best option - one wall, the best one is at the head of the bed.

It is necessary to prepare the wall, paint it in a calm color, and then with the help of a special high-quality adhesive to apply logs. They can be fastened closely to each other or come up with an interesting fragmentary drawing. It all depends on the imagination of the artist.

Wall paneling

The most popular type of wall surface finish using panels is a Christmas tree pattern. To implement it, you need tools such as protractor, hacksaw, adhesive tape( double-sided), skin and pencil.

The finishing process consists of several key steps:

• calculation;
• markup;
• trimming;
• mount.

Let's consider each of them in more detail.

Step 1. We compose on a piece of paper a diagram of how the finished wall should look. It is very important to pay attention to the accuracy of the measurements. This is an extremely important stage, so do not approach it negligently.

Step 2. Clearly in the middle of the wall we draw a straight vertical line using a simple pencil. It will serve as a boundary for the correct laying of panels.

Step 3. Prepare the panels. This means that we take them and cut them at an angle of 90 degrees so that one edge turns out to be oblique. One half of the boards should be cut off from the right-hand corner, the other on the left side.

Step 4. Take the double-sided adhesive tape and fix it on the panels. It is important that each strip has three longitudinal stripes of tape.

Step 5. First of all we attach the middle elements. This will require an assistant. Apply the slats oblique angles, focusing on the drawn line. It is important to ensure that there are no cracks left between them.

Step 6. Fix the panels on the wall. To do this, remove the protective film from the elements and tightly press the straps to the surface.

Step 7. Focusing on the panels that were glued first, we continue to paste the wall by analogy.

This option is most often used for bedrooms, but as an experiment you can try it in the kitchen. Do not be afraid to trust your own taste and realize your fantasies. In addition, the tree is the material that will make it easy to translate creative ideas.

Video - Tree on the wall with your own hands

Video - Wall decoration with wood