Determine that this is
Among a huge variety of finishing and building materials, this board has become widespread. The attractive appearance of the floor made of this material, its lightness, high resistance to wear and ease of installation - these and many other qualities determine the high popularity of this kind of facing material.
A modern board is a product made of autoclaved wood or chipboard. On one side of it there is a spike, and on the other( opposite) - a groove. During the laying of the boards are fastened together by the "spike-groove" method, that is, they come together to a light click of the .The result is a smooth coating, without any gaps, featuring excellent appearance and performance.
The undoubted advantage of this material is that it can be used without problems for both flooring and finishing. The structure of this board, namely the presence of grooves, allows to ensure good air circulation, as a result of which its decay is prevented from excessive humidity and mold on it.
In addition, the material is endowed with good heat and sound insulation properties, which are of considerable importance in construction. This board is an environmentally friendly material that, if properly maintained and operated, can last several decades.
Sheet piling - choose and look for the application
As already mentioned, this type of flooring is unique in its versatility and suitable for the device not only roughing, but also finishing. In the first case, as a rule, choose a material made of soft softwood.
After the device of such a floor it is varnished or carpeted with a high pile carpet for greater comfort when walking. To adopt a more aesthetically pleasing appearance, the sheet pile can be finished with plastic tiles. In the second case - for finishing, on the contrary, a hardwood board is used.
To avoid the occurrence of various deformations of the floor, experts advise the use of boards, the moisture content of which does not exceed 10%.
Before making a decision as to whether a groovy floor board is suitable for you, you need to assess the humidity level of the room in which it will fit. Material from such species of trees as pine, cedar or spruce are not the best option for industrial and residential premises with a sufficiently high level of humidity. For them, a hard board made of larch is much better. For a house or apartment with central heating it is recommended to purchase a material with 10-14% moisture content.
A grooved wooden board can be used to finish the floor in a house, apartment, balcony or even a sauna. Often found and the edge of the pool, made of this material. It can be laid on concrete, hardboard or logs, but to achieve a perfectly flat surface it is still worth using a special substrate. It not only facilitates the installation of the material, but also enhances the soundproofing properties of the floor.
Board hollow sheet - laying basics
Before laying the board, you should check the availability of the following tools and fasteners: hammer, nails, measuring tape, hacksaw, circular saw and staples. The wooden floor is best laid on the logs. The thickness of the board in this case should be about 20-25mm. Having made sure that after laying the log you have got absolutely flat surface without unnecessary slopes, you can proceed directly to the device of the floor.
First of all, the length of the wall in the room where the cover is mounted is measured, and the first board is cut off on it. Then it is laid with a spike to the wall. The distance between the wall and the board should be about 20 mm so that after the end of the work there is no deformation of the coating as a result of its compression and expansion. Then you can take a short board. The spike of each subsequent one is inserted into the groove of the previous one.
Each board is nailed directly to the base of the floor.
This way the floor of the whole room is covered. During laying, short boards are joined at the places where the lag lies. Finishing the laying of two or three wooden canvases must necessarily have a length in the entire wall. If necessary, the last board is cut with a circular saw to the desired width. In the gap between the wall and the last board, wooden spacers are hammered in, which hold the board until it is completely secured to the floor surface - nailing.
As a result of your efforts and time, you get a quality and quite practical floor covering. If desired, its surface can be treated with special compositions that give an attractive appearance and increase the service life.