Arbor with BBQ

Many perceive the dacha as a resting place. Often there are picnics in the open air, which are often accompanied by the preparation of delicious kebabs. And, as you know, this requires a place where you can build a fire. They can be a garden gazebo with a barbecue, which is not difficult to do with their own hands. The main thing is that it should be fireproof. How to build such a structure?

Highlights of the

Various materials are used to make a pavilion with a barbecue. It is important that this building is in harmony with the landscape on the site. The main materials for building such structures are often wood, brick or metal. If you do not know which one to use, take the wood. Pavilions for the garden from it fit well into the site of almost any style. After all, a tree can rightfully be called a universal material, which allows you to realize the most daring imaginations.

The advantages of wooden barbecue pavilions include the fact that the material itself is accessible. Tools for processing it are easy to get. In addition, if such a structure is treated with special media, it will be a long and reliable stand for many years. It should also be noted that the construction process takes a little time and, most importantly, is relatively simple. At the same time, it is possible to use a lightweight foundation.

An arbor with a barbecue made of bricks needs a more complete basis. This material is usually used for the erection of capital structures. A brick garden for a garden will cost more than a wooden one. And, perhaps, this is the only serious drawback of such a structure.

The advantages of a brick pavilion are much greater. If a construction with a barbecue is erected, an important advantage is its fire safety. After all, the brick building is not afraid of sparks, which can easily appear when cooking in the grill. In addition, the construction of this material does not require any special care. Such gazebos for the garden do not need to be repaired often. After all, brick itself is a very strong and durable material. In addition, from it you can build a closed gazebo barbecue, which can hide from any weather whims, whether it's snow, rain or wind. Therefore, here you can even meet the New Year.

It is much more difficult to build a wrought iron gazebo. Especially if you lack the necessary skills and enough free time. The cost of such a design depends largely on the design and complexity chosen. Forging makes it possible to create a truly unique pavilion that can become a feature of any garden. And the brazier can be built in the same style with a gazebo. In the same style it is possible to make garden benches and other decor of the site, made with forging.

Forged arbor is a durable building. The service life can be significantly increased if powder painting, alkyd solutions and enamels are used. These tools help to prevent corrosion.

Often, the owners of the sites choose buildings, the construction of which combines several materials at once. Their properties often complement each other. For example, there is a glazed gazebo with a barbecue, made of bricks, in which there are elements of forging as an ornament.

Materials for a gazebo with barbecue

If you are planning to make a barbecue in such a building, then without open fire you will not manage. This should be taken into account when choosing a material. Therefore, it is necessary to ensure good fire safety. Therefore, you can not use easily flammable materials. Take care not only of your comfort, but also of safety.

Before selecting materials for the construction of such a structure, we recommend the following tips:

1. Perhaps most often arbors are built of brick or stone. But nobody uses the tree. You just need to protect it from fire. This is done with the help of special protective compounds.
2. If the barbecue is equipped with a compartment under the woodpile, then it and other elements are recommended to be made of aerated concrete blocks. In this case, it is best to use heat-resistant oven brick as the material for the chimney and furnace.
3. It is important to choose the right metal for metal barbecue elements. For this purpose, it is recommended to use cast iron, which is characterized by good resistance to high temperatures. In addition, this material does not burn out, is durable and, more importantly, is safe. For this purpose, stainless steel with a titanium coating can also be used.
4. Sometimes for the construction of structures using ordinary steel. However, this is not recommended, because it quickly burns out, is unstable to high temperatures. In addition, when it is heated, scale is formed, which can get into the food.
5. The floor in the summer gazebo with a barbecue is best laid out with refractory tiles. If you want to still use the usual material for this purpose, then necessarily impregnate it with flame retardant( protective) composition.

By the way, the floor in the gazebo and its porch should be covered with tiles laid out with a certain bias. The most difficult is to create this same slope, which is usually 2 degrees. It is he who allows to ensure the flow of water to the holes in the direction of each exit. Similar troughs are usually found in the lower part of the plinth. This slope will avoid the accumulation of moisture, and, consequently, people in this arbor will be more comfortable to be.

How to make a gazebo with your own hands with a barbecue

In this case, it is important to take into account the key features of the garden area where construction will be carried out. And the place for future arbor must be chosen in advance. It is best to pick up a piece of land in the shade. In this case, the platform must be level without slopes. Step-by-step work order:

1. When the site is selected, you can begin to make a foundation markup. The size of the basis depends largely on the type of materials used, as well as on the type of furnace. You can use the ready-made projects of arbours with a barbecue or make up your own.
2. Different types of foundations can be used for this design, but a tape basis is better for this. Such a foundation can withstand the weight of the building and barbecue. In any case, the foundation must be laid at least to a depth of 330 mm.
3. At the bottom of the excavated trench, a layer of 80 mm thick sand should be poured out. After that, the metal mesh or reinforcement should be laid from above. Then you can start pouring concrete.
4. When you are finished with concrete pouring, you can masonry. The first two rows are recommended to be laid out with a continuous layer. After that it is necessary to mark out the location of the niche for firewood. It is laid out of seven solid rows of bricks.
5. After the construction of the niche, you need to lay down a smoke box and a pipe. The upper part of the pipe must be protected from precipitation by a sheet of metal.
6. When the brick brazier is ready, you can start building walls around it. Remember, when building a barbecue arbor for cottages it is recommended to use not one material, but a combination of several. For example, for a firebox, it is possible to use a heat-resistant metal, and the walls of the hearth should be made of stone or brick.
7. Even if the brazier to be mounted is made of another material( not brick), the foundation of the arbor must have sufficient strength. If platinum is to build a stone stove, then be sure to consider all the features of erecting such a structure.
8. It's important not to forget to make a hood. Otherwise, the smoke can quickly spoil all the time in the gazebo. The hood, as a rule, is made of brick or metal.
9. Depending on the size of the gazebo for the baseline, it may be necessary to install transverse logs. If this was done, but then they plank the board. Bars can be laid close to each other or leave a gap of about 11-22 mm between them. In the second case, cleaning up the garbage accumulated after cooking in the barbecue will obviously be easier.
10. If the arbor is a capital, its walls can be raised to the roof level. Although, instead of walls it is allowed to build simple parapets made of bricks, wood or other suitable materials. And their optimal height will be 1,1-1,5 m. On top of the parapets are attached railings.
11. In the middle of the spans and in the corners, it is necessary to install poles 550 to 550 mm in cross-section. In fact, they can be made thicker. The most important thing is that they can withstand the roof. For a single-pitched roof, on one side, the supports are usually mounted about 220 mm higher in height than the posts on the other side. Thus, the required ramp will be obtained.
12. Along the long wall of the gazebo on the poles, you need to fix the logs, after which, at equal distances from each other, brusks with a cross section of 40 to 40 mm are stuffed on them. Then you can lay the roofing material on the roof. As it can be used polycarbonate, slate, metal or profiled.

If you know that you can not build a gazebo with a barbecue yourself, then ask for help from companies that are engaged in the erection of such structures. There for you will be able to pick up ready-made drawings of a gazebo with a barbecue. This, of course, will cost a little more than the work done with his own hands. Nevertheless, this option will make it possible to build in a very short time at your dacha such a cozy recreation area, like a gazebo with a barbecue grill.

Construction of the barbecue area

Phased work order:

1. For the oven it is necessary to pour a separate foundation, which must also be fixed with a reinforcing cage. To prepare the mixture for the basis, cement # 300 is used.
2. When the concrete foundation solidifies, it is necessary to lay sheets of waterproofing on it, after which a brick is laid. And from the outside, red facing is used, and inside - heat-resistant.
3. To prepare mortar for masonry, 3 parts of clay and 1 part of sand are mixed. Water should be added so that the consistency of the solution was similar to sour cream. The base of the future furnace as a result of the masonry resembles the shape of the letter P. The height of the structure should be approximately 1.1 m.
4. In the process of laying between the lateral sides, two iron gratings should be installed at a distance of 260 mm from each other. The upper one is used for cooking, and the bottom is prepared with coals. It is important to install a chimney above the top grate.
5. In order to facilitate the process of laying bricks, you can use a pair of pins length of about 420 mm. These supports in the process of laying the corners of the socle and when erecting the columns are fixed directly into the solution. If you take them as a guide, you can evenly place bricks.
6. After the next row of pins are pulled out and rearranged to the next row also under the solution. This method allows you to lay out the socle of the correct geometric shape. In addition, all the columns turn out to be even in height.

One of the simplest designs has been described above. It will be somewhat more difficult to erect a barbecue with a base in the form of the letter E. This design provides for two grooves at the bottom, which can be used to store firewood. For this purpose, the upper part is better made of refractory bricks, and the lower one is made of gas-silicone blocks.

Often in the design of a barbecue is provided not only the oven, which is the basis, but also some additional functions. It turns out a multifunctional oven. For example, here you can also find a sink with all the necessary equipment and side compartments designed for cutting works.

What are the braziers

Today, there are different designs for ready-made braziers. Let us consider only some of them. By the way, it is necessary to decide on the designs even when designing. So, let's look at the basic varieties:

1. The easiest, perhaps, are collapsible collapsible mangles, which in the folded state represent a folding suitcase that easily fits into the trunk of the car. Of the disadvantages, it should be noted that its walls can be easily deformed. In addition, they do not tolerate long heating and do not use firewood.
2. One of the most popular today are metal braziers. They have earned their "glory" due to reliability, light weight and long service life. Steel walls keep the heat well, and in the box you can successfully build a fire. In addition, the steel brazier does not rust and does not require frequent maintenance. Above it you can mount a grill, a skewer for meat, or a spit for roast meat.
3. The most suitable for gazebo, perhaps, is a cast-iron brazier. Constructions of this type are very durable. In addition, they consume much less fuel for cooking than other options. At the same time, they are easy to use.
4. For a long time, brick braziers can serve. Only for them a reliable and sufficiently strong basis is required. It is important that he can withstand the weight of heavy construction.
5. For people who for their own reasons do not like the smell of smoke or open fire, but want to cook tasty meat at their dacha, an electric grill becomes a fairly acceptable option.

Arbor with barbecue: photo