Only specialists know about this new material. However, it is perfectly suitable for use both in individual construction and in solving economic, purely domestic issues. So, what is an energyflex and what characteristics and properties does it have?
Energoflex is essentially a "brother" of foamed polyethylene. This product is known that it is produced in the form of plates( sheets), which are used to equip thermal insulation layers. Including, and for the warming of the main pipelines. But to "wrap" a small diameter pipe in it is already a problem.
Energoflex is available in a variety of options. It can be roll, in the form of mats or slabs, as well as in tubular execution. That's what makes it especially attractive. The assortment is extensive;all products differ both in length and in diameter. In such a shell, you can "pack" any pipe. By the way, energyflex is a material of Russian production.
It is successfully used both for insulation and insulation of sewer pipes, main lines, and for surfaces of buildings and structures - walls, attics, floors, ceilings, etc. It can be used in industrial facilities and in residential buildings, in cottages and in garages. Without exaggeration, this is a universal insulator.
Properties and marks of the energy fleet
- is resistant to aggressive substances;
- practically does not absorb moisture;
- thermal conductivity close to zero;
- strength and ductility;
- ecological cleanliness;
- simplicity of laying on any surface.
Let's dwell only on some brands of the product.
Energoflex Super
- is a sheet material. Suitable for coating large diameter pipes, tanks, fittings.
- Length 5 - 9 m, width 1 m, thickness from 10 to 20 mm.
Super TP AL
- Roll material. Has a coating of aluminum foil with a protective film. Perfectly suited for thermal insulation with the equipment of the "warm floor" system.
- Length 15 - 30 m, width 1 m, thickness from 3 to 5 mm.
TP AL
- Supplied as mats or plates. Execution, like the brand Super TP AL( foil, protective film).
- Mats have a length of 3.5 m, a width of 1 m, a thickness of 25 mm.
- Plates: length 1.6 m, width 1 m, thickness 25 mm.
Star Duct
- Roll product with self-adhesive surface. Used for finishing air ducts( air conditioning, ventilation).
- Length from 5 to 30 m, width 1 m, thickness from 3 to 20 mm.
Super 1M, 2M
- Products of tubular type, which differ from each other in length( 1 or 2 m).The assortment is large, as all tubes have differences in both outer and inner diameters( different insulation thicknesses).They are used to protect pipes from corrosion, reduce heat loss in engineering communications.
Super Protect
- Designed for the intended use as heat insulators for water pipes and heating.
As a drawback, it should be noted that the energy fleet does not "like" direct sunlight. Therefore, it can not be used as the top coat.
Some characteristics of the
- temperature range of use from -40 to + 70 degrees;
- air humidity up to 100%
- thermal conductivity( at 0 degrees) 0.032 W /( mS)
- fire safety group G2
