How to paint the lining inside the house?
The lining of the lining allows to hide surface irregularities and give an aesthetically attractive appearance to the entire room. In addition, it is also environmentally friendly material that is beneficial for the human body. However, the distinctive feature of the tree is the need for its processing. So it will retain its original appearance and performance characteristics longer. That's why often use all kinds of varnishes, impregnations, paints.
You probably will have a question - which composition is better to use inside the house? If we talk about lacquer for lining, then Panels-Yassia, Eurotex, Tikkurila will do. It is possible to name the paint from paint Pinotex ( operates on the principle of stain), Aquatex ( Russian analogue of Pinotex, only much cheaper).If you need to additionally paint the balcony or loggia, and you are thinking about what better to paint the lining in this case, then all the above mixtures will be useful, plus the Panels-Yassia Arctic and Senezh Aquadecor.
How to paint a lining?
Before you can coat the lining with the appropriate formulations, you must prepare the base. If there is a past paint on the surface, then you need to see how well it holds. With a strong connection, you only need to rinse the walls with 2% soda( that is, about 300 gr diluted in a bucket of water).
The subsequent application of paint on the substrate is not necessary, since the previous layer has remained. Then the surface is shpatlyuyut and covered with linseed oil, to which you can add a certain amount of pigment and solvent. At the finishing stage, apply a primer.
In the case where there is no paint on the base, it is cleaned of dirt and dust with the help of special bleaches. If they do not help, then apply a clarifying stain. Then, a primer is mandatory. Only then apply a thin layer of paint for the lining.
Movements should be in the direction from top to bottom. For the same place you do not need to brush several times, first - the first layer, then - the second. Painting the lining in the places of docking with skirting boards, as well as window frames, is done with a small brush.
In some cases, when you need to paint a small amount of wood or metal surfaces with nitrocracks, the question arises - how to cover the lining in this case? In this situation, you can use the spray gun or mittens.
Yes, yes, that's it. For example, a gigantic mitten with an outwardly turned fur is worn on a brush. Then it is lowered into the paint and covers the surface of pipes, slats and so on. However, before that, it is important to treat them with vinegar, so to speak, prepare for painting. At the last stage, the lining of the lining can be done. But this, by the way, can be done without painting. Lacquer is often applied to a wooden surface and performs a protective function, preserving and emphasizing the natural color of the tree.
Some useful tips for
After finishing the painting process, it is not always possible to wash your hands. To do this, you can use a special solvent or ordinary vegetable oil. It should be rubbed on the soiled area of the skin and wait a few minutes, then rinse off with plenty of water.
There are usually a lot to paint recommendations. For example, if a film appears on the painted surface, then a small piece of nylon must be lowered into the jar and a brush dipped through it. Also, the film does not appear in the event that a piece of paper is placed on the surface and olive oil is poured on top.
In the case where it is necessary that the painted surfaces of windows and doors normally dry and do not come into contact with each other, they can be laid with ordinary foil, it will protect from gluing. After the final drying it can be removed. By the way, the same can be done with the floor, when you need to go through it without leaving traces.
