Technology flocking wallpaper on non-woven basis

The walls at the entrance to any room are the most contemplated objects, andeach owner strives to make them uneasy ideal, but impeccable. For their decoration today there are a lot of unique solutions. They can be painted, they can be decorated with decorative stucco or wallpapered. It is the latter method that is most common, because with this material, and even with a beautiful textured pattern, you can create a truly unique atmosphere. In addition, modern technology allows you to produce wallpaper that can be painted several times. These include non-woven fabrics. In this article, we will consider the technology of flocking wallpaper, but before we get acquainted with their types and basic principles of choice.

Types of wallpaper and their advantages

Non-woven wallpaper is one of the best materials for wall and ceiling decoration. What are their advantages? They, being a material of natural origin, have excellent indicators of air permeability due to the porous structure. Sticking non-woven wallpaper on the walls allows them to breathe, thereby preventing the formation of mold and fungus development. Also they can be repainted many times. On sale there are models that can withstand up to 10 cycles of tinting with latex paint. At the same time, the wallpaper only becomes stronger and more resistant to stresses. But because of the latex powder dispersion, the porous structure of non-woven wallpaper changes its texture and with each coat of paint they become less attractive.

wallpaper. They can withstand multilayer structure for many tinting cycles. Their carrier base is fibrous cellulose, which has an incredible tensile and tear strength.

But do not doubt that they will not get wet with an excessive thickness of the adhesive layer and will not swell. Yes, they have such a property. Therefore, it is important to observe the proportion and do not forget to spread the glue carefully over the surface of the wall.

Today, there are at least two varieties of non-woven wallpaper, the gluing of the walls with which will make the design exceptional and unique:

• Textured or corrugated. They perfectly hide the defects and minor flaws in the surface of the wall, creating a relief surface. Such wallpaper can be used in absolutely any room, but it should be remembered that they are less amenable to washing. It is better, in general, not to wash.
• The second type of wallpaper are dense embossing. Thanks to the production technology, they are more durable, but also thinner. This property suggests that pasting flizeline wallpaper of this type of poorly prepared walls will only make nuances and shortcomings on the surface. Therefore, they should be used only on a well-prepared basis.

Depending on the color of the sale, there are also two types of wallpaper:

• Colored. They already have a picture, which must be selected and taken into account when calculating the amount of material. Monochrome or tinted. These wallpapers can be painted up to 10 times, thereby creating a new more fresh design in the room. This is the main advantage of this material - with a minimal cost to significantly change the design of the apartment.

All of the above types of wallpaper are available in two sizes with a length of 10 m:

• width 53 cm;
• width of 106 cm.

Pros and cons of wallpaper of different widths

For gluing flizeline wallpaper by hand in a small room with a lot of windows and doorways, of course, it's better to stop at a standard width of 53 cm with them under these conditions, but they are more expensive and hassle, but they are more expensive than a meter.

The second type of a size of 106 cm will become relevant in a large and spacious room. They are faster to glue, less cutting of sheets and half the joints, which are usually allocated when pasting. In addition, they are cheaper than the first type. That, most likely, is connected with a policy of sales and management of the companies, their producing.

Technologies do not require a lot of costs for the production of cloth width of a meter, but the cost is almost twice as high. Thus, for a slight increase in embezzlement, we get more profit.

Calculate the number of wallpapers

The rules for gluing fliseline wallpaper first of all include the correct calculation. If there remains a large supply, then this is basically nothing. But if you take into account the durability of this material, then it's just thrown in money. But their cost is quite high, compared to conventional paper. And their shortage can delay repair for a long time, or, in general, spoil it, if there are no such repairs.

When buying, pay attention to the batch number. In wallpaper of the same species, it is always the same. Also, when calculating, add 2 cm to each sheet. This will help avoid distortions in the unevenness of the heights from floor to ceiling.

Each seller has a calculation table, by which it is always possible to determine how many tubes will be required for a room with such parameters. In a few words, everything is quite simple. Manufacturers produce wallpaper with a small margin along the length, which is about 10 cm. And if you consider that the distance from the floor to the ceiling is 2.5 m, then in one roll you will get 4 pieces with a margin for each of 2-2.5 cm. But this is true if there is no need to select a drawing because of its absence. If the picture is present, it is necessary to take into account its step, which is usually indicated on the package.

Next, to calculate, you need to find out the perimeter of the room. If it is 10 m, then 53 cm of tubes will require 4 pcs. In this case, one more sheet with a quarter remains in the stock, if you subtract the area of ​​the door and window openings. More precisely, the calculate the number of wallpapers will help the online calculator.

Widget from SocialMart

Substrate preparation technology

High-quality wall-papering with non-woven wallpaper should only be carried out on the prepared wall surface. They should be not easy smooth, but even. Bumps and pits on the surface in any case lead to deformation of the sheet or skew of the docking line. And this, you will agree, will look awkward at such and such cost of wallpaper.

For leveling walls it is necessary to use putty with subsequent trowelling. And than to ground the walls before flocking wallpaper wallpapering? The wall must be carefully covered with a high penetration primer. Non-woven wallpaper is a rather heavy finishing material, therefore they require a strong and reliable base with high adhesion values. For simple wallpapers, it's enough to use the same glue as a primer, but for flizeline it can play a cruel joke in the future.

Pasting walls with non-woven wallpaper is done by marking. Usually, masters recommend starting from a far corner or from a window. But this was true when the thin ones were produced with a special cusp for the admission of the wallpaper, so that the seams were least noticeable. Today, technology requires a more responsible approach and direct docking of sheets in a single plane. Therefore, the markup begins with any convenient and maximally flat place. It is also necessary that the first sheet on it lay down without bends and cuts. Such a place can become a window opening, a door or even an angle.

Apply marking to

Using a plumb and a roulette, a distance equal to the width of one sheet is measured from the starting point and a vertical line is drawn with a soft pencil, preferably of a gray or close color. Further, the marking is continued from the already existing line along the entire perimeter of the room with periodic control of the verticality of the line. When you hit an angle from one wall to another, you need to make a small allowance. It can be from 1 to 2 cm. This is necessary in order to avoid a glimpse due to the uneven geometry of the angle. Its then with the help of an even tool( a long spatula or rule) and an acute construction knife can easily be removed. In the same way, outer corners are avoided.

Everything, preparation of walls for flocking wallpaper wallpapering is completely carried out, it is possible to start cutting the wallpaper sheets. Flizeline wallpaper should be glued to the newly painted surface of the wall, but do not put it on the wallpaper itself. This will result in excessive impregnation, which can lead to deformation and loss of appearance. In addition, from long-term storage in a curled pattern to the outside, the wallpaper has acquired a characteristic spiral shape. To fix this, each cut sheet is folded loosely in the opposite direction and is set to wait for the queue at its place. This will allow you to spend less time at the very pasting.

It's important to remember! If you are new to this business and doubt that you will get to paste the butt-end, then in each place it is recommended to paint it in the tone of the wallpaper color. This excludes the possibility of highlighting white glimpses of the wall against the background of the color pattern.

Pasting wallpaper

Marking, preparing each fragment, stocked with a stepladder and another brush, a soft roller, a wallpaper brush and a plastic spatula, you can start working.

We produce glue according to the instructions. Here it is important to pay attention to the expense with heavy wallpaper and lungs. Also, manufacturers indicate the consumption of glue with application to both surfaces and one.

Dilute the adhesive with water at room temperature. To do this, dial the required quantity in the container and, with a broad stick continuously stirring, glue is filled up with a thin trickle. It is important here to prevent the formation of lumps during crystallization of the mixture. If they were formed, they can easily be removed by a conventional reinforcing mesh. It is enough to lower its edge into a container and stir the composition. The clots themselves will adhere to the grid.

The technology of gluing wallpaper on a non-woven base means applying the adhesive only to the walls with a soft roller. If this condition is not met, then they can swell and burst. Then the sheet prepared and folded in the opposite direction for alignment turns around and gently is applied to the surface. Leveling it must start from the top down from the center to the edges, but just do not rub. A roll out the roller or level with a special brush. Usually it is used for wallpaper with a complex texture pattern. With the help of a thin roller all joints are rolled up. It is important not to overdo it, because the porous structure of the wallpaper can be damaged and there will be a dent in this place. On the ways and options for fixing the defects of the joints of the wallpaper. The best selection of videos on how to glue wallpaper.

Fixing the edges of the sheets over the plinth

For a better bonding of the sheet, all the corners should be gently squeezed with a plastic spatula. Crop surplus must be carried out only after the wallpaper dries completely. To do this, a new wide spatula is pressed down by the corner and an unnecessary piece is removed with a sharp knife. For a beautiful and aesthetic finish of wall sections around switches and sockets, their lids should be unscrewed. And when surfacing the surface, make sure that the glue does not enter the nest. The best option, if illumination allows, will be to de-energize the entire room. More details on how to glue the wallpaper in the corners.

In addition to the above instructions it will be useful to view the video.