Contents of
- 1 And how to distinguish the original Makita perforator from a fake?
- 1.1 Detection of a fake when examining the suitcase
- 1.2 Determining a counterfeit when inspecting the body of a perforator Makita 2450, 2470
- 2 What you need to know in order not to buy a forgery Makita perforator?
- 2.1 Video on the forgery of the perforator
The Makita 2450, 2470 rotary hammers are especially popular among Russian amateurs with their own hands. This popularity is supported by a high degree of reliability of tools, their long life without forced failures, simplicity of design and availability of repair.
Makita perforators are produced in different countries. You can determine this on the nameplate attached to the suitcase or tool case.
If the label is labeled A, the tool is manufactured in the USA.The letter D indicates the German manufacturer( Dolmar plants), the letter E indicates that the tool is made in Japan, the letter G is made in the UK.
But there are Chinese punchers made in China and denoted by the letters Y or K.
Makita 2450, 2470 perforators produced in Romania are marked with the letter R.
This Makita
It should be noted that Chinese punchers are made in Chinese factories belonging to Europeanproducers. The perforators are made on the same lines, from the same parts, by the same workers. The only difference is that for the European consumer, the tools undergo double quality control. First, they are checked at the factory, the perforators are checked after arrival in the country of the consumer.
For third countries, including Russia, the perforators produced at Chinese factories do not pass even factory control. But their quality does not decrease from this, but the price decreases almost 2. .. 3 times. And such a tool is not considered a fake.
If the Chinese manufacturers can make Makita perforators under license with high quality, then you can not say about the pods of Makita 2450, 2470 tools.
By the way, it is useful to tell about the so-called illegally imported power tools. Most often, illegally imported tools can be found on the inscriptions on the labels on the Makita 2450, 2470 pushers.
Makita on-toppers for Russian and Asian consumers
And here are the differences in the labels on the original and forgery case Makita
Nameplates on the fake and the original
perforators Makita 2450, 2470 the supply voltage of the tool is indicated by one digit: 230 V. In addition, on the punchers for the Russian consumer, the HCN mark is mandatory, which is not on the nameplatesments are not intended for Russian consumers. This is a sign of passing the certification of the instrument in the Russian authorities.
And how to distinguish the original Makita perforator from a fake?
To determine the forgery of the Makita 2450, 2470 is possible with an external examination. You just need to know what to pay special attention to.
To counterfeit most often indicates a low price for tools of this class.
Makita perforators are not available in different sets.
Definition of a fake when inspecting an external case of a suitcase
The main differences begin when you look at the appearance of a suitcase( case) for transportation and storage of rock drills Makita 2450, 2470.
The factory suitcase must have embossed letters with embossed letters. At a counterfeit case inscriptions are executed in the form of a label or the letters pasted manually. A fake inscription is easily destroyed by a fingernail.
The inscription on the case of the original
The latches of the original case bear the name of the instrument by embossing, extrusion. The fake puncher has no such inscriptions on the latches, as a rule.
Kind of latches on original case and fake
When inspecting the case for the storage and transport of the perforator, carefully inspect the gaps between the lids of the suitcase. At the original suitcase gaps are either absent or have the same clearance along the entire perimeter of contact of the parts.
Original and forgery gaps
Inspect the back of the case. On the original case, the inscription of the word Makita must be printed with white dents. Fake cases have no such inscription.
Definition of counterfeiting with external inspection of the hammer body Makita 2450, 2470
On the external inspection of the tool body it is easy to distinguish a fake from the original. In counterfeiting, the stator case color is more blue, whereas the original has a more green color.
The name on the body of the Makita 2450 perforator has been cast by the original. On the stator cover the inscription is convex, on the cover of the rotor the inscription is depressed.
At the fake Makita 2450 the inscription on the green case is pasted, and it is easily removed with the help of a nail. And the inscription on the black case is completely absent.
Falsification and original
Falsification can be determined and examined carefully with the side handle of the Makita 2450 rotary hammer. On the handle of the original in the place of the grip of the handle, the inscription is stamped. At a fake there is no inscription on the side handle.
With careful external examination, pay attention to the plastic parts of the punch. At a fake casting substandard, with ripped edges, with traces of a flare.
Look closely at how the icons are plotted around the mode switch. The original icons are convex and neat. Forgery produces an uneven and torn inscription, made with obvious defects.
Original and forgery of Makita
The original Makita 2470 inscription is made by casting on the stator housing and extruding the rotor on the body.
The inscription on the body of the counterfeit Makita 2470 is made in the form of a sticker or made separately with pasted letters. It's easy to find by hooking the edge of a sticker or letter with your fingernail.
The additional handle of the original Makita 2470 rotary hammer has two inscriptions. One method of casting, the second method of extrusion. Counterfeits are issued without any inscriptions.
There are original models of rock drills Makita 2450, 2470, on which on the green case of the rotor the inscription is marked on a self-adhesive, but under it there is an inscription made by extrusion.
Original and forgery of rotor hull rotor Makita
Two types of inscriptions are marked on the side handle of Makita-Makta-Maktor perforator. One inscription made of white plastic, the second inscription is stamped. The inscription from white is performed separately by casting and already, then it is painted white. At fakes, the inscriptions on the side handle are completely absent.
Inscription on the handle of the original and its absence on the fake
There are Makita perforators, which have a self-adhesive sticker attached to the body. But if you look closely, the inscription Makita, made by a dent, is guessed under the label.
Photo of self-adhesive and inscription on the original
What you need to know in order not to buy a forgery Makita perforator?
In order not to run into dishonest vendors and not buy a fake, you need to read our recommendations.
It is recommended to purchase power tools of popular brands in specialized stores that provide all the necessary warranty documents when buying.
We do not recommend buying tool sets from well-known companies. They do not produce such products. In the sets most often included a Bulgarian, a puncher or a drill and a jigsaw and at the same time is cheap.
We do not recommend chasing cheapness! The low price of the tool should push you to the idea of whether or not it is fake in front of you. Cheap, does not mean high quality.
Makita factory guns are often equipped with cases for storage and transportation.
With an external examination, you will be able to find the main defects, which say that before you a fake. If you find out external defects, do not try to hope further that inside there is a factory-made perforator.
Video on fake guns
1. How to distinguish a fake from the original punch Makita 2470
2. How to distinguish a fake from the original puncher Makita 2450
3. Determination of the imitation of the suitcase
? List = UUlkmvD2m6GxPpj3-9N92EFA
