Laying the laminate with your own hands video. Laminate laying technology

If you decided in your apartment to lay the laminate floor on your own, then you can understand, because it is laminatedcoverage is still quite relevant in our time. Laying the laminate with your own hands is not difficult, but the price is acceptable. Now in stores a huge choice of laminates. You can choose for every taste and interior in your apartment. He always looked harmonious and beautiful. Determine where the laminate will be laid on the floor. In the bathroom it is not advisable to do this. The laminate flooring contains a tree, and as is known the tree is sensitive to moisture. Do not forget about it. The apartment repair site has prepared a good instruction on the technology of laying a laminate with photos and video.

Laying the laminate with your own hands

First of all, we want to draw your attention to the fact that putting the laminate alone will be quite problematic, it is advisable to carry out it at least in pairs.

First, select the color of the laminate, then determine its class. Then you need to determine how much it is necessary for laying on the floor in a particular room. There are 10 boards in one bundle. They are designed for 2 square meters. Let's assume that about 12 packs of laminate will be needed for 12 square meters. Buy, just in case, with a margin, as there is a chance to accidentally damage the board during laying, or cut the board from the wrong side, especially if you put it on the floor yourself and even the first time. These are common cases, especially if you are new to this business. In one word an extra layer of laminate will never be superfluous! To find out how many laminate packs you need, you can use the free online calculator.

Before you start laying a laminate with your own hands and correctly, you need to prepare very well the very foundation on which you will lay it, before that carefully level the floor and walk around with a vacuum cleaner. When laying do a screed or any other operation is not necessary. It will be enough that you have a flat floor surface without strong bumps and drops.

If you have a wooden floor, then walk in the right places with a grinding machine, and if the floor creaks, hammer a few nails in the bonding points( near the previously hammered nails, maybe the old ones are loose).But you can not dodge - you can put a laminate on the linoleum, if it's there, the most important thing is that it would be with an even surface. And if you wish that everything would turn out perfectly and ideally, then it is desirable to implement a screed.

Before starting the robot, prepare all the necessary tools at once. First of all it is: a roll of foamed polyethylene( the base under the laminate) how to choose it correctly read here. We need a jigsaw or saw, a hammer, a wooden bar 15-20 cm, a tape measure and a pencil. You can use an electric jigsaw - to saw the laminate manually is not so easy.

The technology of laying the laminate with their own hands

Most people believe that the technology of laying the laminate floor is not anything complicated and it's done quite fast. These are the people who did not feel personally in this matter, and by hearsay or just by others they saw how others do it, watched the video. At first glance, everything is simple, boards are taken and stacked together and stacked on the floor. However, we warn that laying the laminate with your own hands, and even more so for the first time takes away from you quite the same more strength and time than you can imagine.

Let's analyze the technology of laminate laying on the floor in more detail. The boards are fastened to each other on all four sides by the principle of a comb-groove, in other words, the comb of one board is inserted into the groove of the other and is tightly fastened with a hammer. More details are shown in the figure.

Widget from SocialMart

The technology itself is pretty simple, you can start from either side of the room. Lay the laminate perpendicular to the window, so there will not be visible joints between the boards. In the beginning, it is necessary to stretch the substrate along the wall in one row, because if you lay it on the floor, along the entire perimeter, it will be very disturbing. After that, take the laminate boards and lay out a strip along the wall and fasten together with the end side. Adjust the boards with a hammer so that they fit snugly together.

For this, take a wooden bar and put it to the end of the board from the front side, only not to the ridge itself but on top of it, so as not to break the ridge. Then, adjust the boards to each other, tapping gently on the bar with a hammer. End the board in the wall, leaving a gap in the thickness of the laminate( for this fit pieces), the main thing is not to overdo it, otherwise you can damage the laminate board( in such cases, you need a stock).This is how we spread and customize the boards along the entire wall. At the very end you need to cut off the board of the right size.

So they laid out the first strip. Press it as tight as possible to the wall, inserting the wedges on all sides, about 1 cm. For these purposes, you can use all the same cut pieces of laminate.

Add the second strip in the same way, just before that, cut off half the laminate board and start folding it. And the next one can start again with the same board.

Thus, it should turn out that the laminate floor is like a chess board, which looks very nice and original. It is at this masonry the resistance of the laminate to the driving forces increases and it does not "walk".

How to properly lay the laminate on the floor yourself

With this masonry, settle the second board. Tightly adjust to each other. Then take this strip neatly and insert it with a comb in the groove of the strip that is pressed against the wall. This should be done at an angle of 20 degrees. Press it tightly, and then press down, just gently. The strip of boards should densely enter the crest into the groove of the strip, pressed against the wall. Do not worry if something does not work out, try again. In the process of laying, you will get it much faster and more confidently. Most importantly, do not forget that the bands should be drawn up so that they are not accidentally messed up and started to be inserted by the other side. That is, the comb must fit into the notch, not the groove in the groove or the comb in the comb. In the video below, it shows how to properly lay the laminate floor on your own, look.

If there is any gap between the laminate strips, take a plate, hammer and adjust each other, tapping lightly along the entire strip, the main thing in the top of the groove, so as not to damage it.

That's how you need to collect and join all the strips of the laminate, adjusting them to each other along the entire perimeter. Most importantly, do not forget to insert the wedges between the wall and the laminate somewhere in 1 cm. The most difficult and not convenient, this is the last strip. Its first need to measure out accurately and accurately cut, and secondly, when you insert the last sheet it is not convenient to drive it closer. To do this, take a strip of iron or profile, at the edges, bend in opposite directions, so that on one side there is a fold of 0.5 cm, and on the other( in the opposite direction) about 1 - 1.5 cm for hammering. Such a self-made "tool" will make it easier to customize the last sheet.

How to avoid other obstacles, such as a pipe, door thresholds I think it is understandable, take a jig saw, measure and cut. Laying the laminate with your hands on the floor is ready. We had to work a little, but saved money and learned the technology of laying. If it's not clear - watch the video and ask questions in the comments. Thank you for attention. And if you damaged the laminate floor, find out how to repair it with your own hands, then this article is just for you.

Laminate lamination with your own hands video