Pros and cons of plasterboard walls

Man has always strived for perfection and ideal, regularly inventing new and better quality universal building materials and tools. As a result of years of testing and unlimited experience, the most demanded today is gypsum board, advantages and disadvantages are also available. It is a universal construction finishing material that is firmly entrenched on any construction site and is actively used at the stages of creating design, comfort and comfort in any room with a low humidity.

Advantages of drywall

Drywall first of all, as a finishing material, has a number of advantages that have led to its widespread use everywhere.

Its first advantage is its lightness. The material is produced in sheet form with standard dimensions of 1.2 x 2.5 m thick with 6, 9, 12 mm. Dimensions may vary depending on the manufacturing technology and the manufacturer. Today from the well-known company Knauf you can find sheets with smaller sizes for easy installation in small rooms. Details about drywall.

The technology of wall finishing with plasterboard has its pros and cons, which can be connected with a variety of factors.

1. Wall alignment speed. The finish of plasterboard walls is called dry plaster, therefore in the course of work such a large amount of dirt does not form as in the traditional method. And the walls are leveled very quickly;
2. Excellent geometric parameters of the wall surface. After the walls are finished with gypsum boards, a perfectly flat surface is obtained in a short time;
3. Drywall is an environmentally friendly and safe building material;
4. Possibility to mount drywall in several ways: on the frame with screws or on a special solution.

Drywall though, according to many sellers and manufacturers, is able to withstand heavy loads, but still do not check it yourself, but if you decide to build a wall, then pre-insert the mortgage profile. Ideally, if you find where the profile passes during the installation of shelves or other structures, this can be done with the help of a hidden wire detection device.

Also to the advantages of gypsum cardboard is the fact that it is produced in large sizes. This allows for the rapid installation of volumetric perfectly smooth structures. What can not be said about the standard plaster and finishing the walls with self-leveling compounds. About how to make a wall correctly from plasterboard.

Resistance to humid environments

Drywall walls also have their pros and cons when installed in humid rooms. It is important to choose the right material here. For sale there are at least 3 types of drywall, depending on the possible operating conditions:

• moisture-proof;
• fireproof;
• normal.

Each of them has its own advantages, as well as the designs from it. If the sheet does not burn from the fire, then from direct exposure to water and GKLV will come to full disrepair. But only this will happen to a lesser degree than with the usual material for dry rooms. Gypsum is gypsum, it can add hardeners and hydrophobic components, but its main property will not change - hygroscopicity, due to which it swells.

Widget from SocialMart

This is another of the few drawbacks of drywall and structures from it. Therefore, due to the possibility of flooding the neighbors from above, partitions and ceilings from ordinary drywall are not recommended. This can lead to additional monetary and nervous waste. It is better to use more resistant to moisture materials, for example, foam block, and the ceiling is better to make the tension or hanging without the use of drywall.

Drywall walls also have pros and cons for versatility and practicality. Creating from this material on wireframe technology a design, it is possible to hide the elements of communication without any special difficulty. Pipes, wiring, ventilation ducts. But again, if there is a threat of underflooding, it is better to use the GKLV sheets. They have a distinctive feature - green cardboard.

But the main advantage of drywall is that only from it you can make whole works of art and unique compositions:

• arches;
• bar counters;
• decorative designs in Art Nouveau style;
• huge massive columns.

Drawbacks of plasterboard walls

In appearance, massive and solid plasterboard structures are not really such if they are directly influenced. They can easily be destroyed by a conventional carpenter's hammer, with a single stroke, through a through hole in the sheet. This drawback will be significant when planning the installation on a wall or bulkhead of heavy curtains. Ideally, it is necessary to think about this at the stages of the frame construction, putting wooden bars or additional profiles into the guide and rack profiles. If you do not provide this in advance, then you should abandon the idea of ​​hanging a large plasma TV on the wall. Otherwise, you can acquire new problems of repair and get rid of technology.

An ordinary brick wall or foam block with a thickness of at least 15 cm can easily cope with the loads exerted on it. All kinds of brackets, hinges and even simply twisted screws in the foam block are perfectly held, securely fixing the shelf for the TV.But because of the lack of ideality of the geometry of the blocks and the master's shortcomings, and even the large weight of the masonry material, the partition of the blocks can become impossible or undesirable. Useful information on the choice of what it is better to do interior partitions in an apartment.

When choosing a material for the construction of non-thick walls and partitions, it is necessary to take into account a lot of parameters and to weigh them well. But in most cases, drywall is the best solution, because only from it you can make truly unique and unique design creations.