Sergey asks:

Recently, I noticed that when you turn on the 1st speed of the hood (out of 4 possible), the motor hums, but does not pull. Perhaps the blades were dirty and heavier, and he could not start at first speed. It doesn't matter, I started it at speed 2, there were no questions. Today my wife turned on the first gear and left. Accordingly, there is a load, it cannot turn, it is under load. I don’t know how many hours the hood was standing like that, but as a result, now no speed is turned on, and the motor does not even hum. The light works. I figured out what I could, the fuse in the box with the wires is intact, there is no smell of burning, the blades in the engine rotate easily by hand. Has the engine burned out or can you do something yourself, if so, where to look where to start? Dome hood Backer QD60A-G6L200.

Hello! How did you check the fuse? A call, I hope? It is necessary to check the integrity of the engine. What is it worth? Most likely with a multi-speed capacitor. Check the integrity of the windings. If it is burnt out, then only rewind, it can be difficult to do. If you find where to buy for a replacement, it will help. The only question is expediency, maybe a new one is cheaper? The lighting in it does not depend on the engine. If the windings are intact, the engine should at least hum. In general, it did not start 90% because the bearings were worn out and did not allow it to spin. And there is a possibility that the blades are really overgrown with fat. Disassemble and twist by hand.

Like(0)I do not like(0)

Ask your questionAnswer the question