The correct connection of the washing machine to the water supply and sanitation

Choosing a location

The correct installation and configuration of a washing machine - a guarantee of a long and trouble-free operation of the equipment. Quite seriously needs to be taken to the choice of location for the washing machine. The machine is usually installed in the vicinity of the communication. Near must be a sewer drain and water. Therefore, the best places for such techniques are generally considered:

• bathroom;
• kitchen;
• restroom.

Bath - a standard. Most of the consumers are trying to install a similar household appliances there, often placing the car under bill-sink water lily. But the small size of rooms in old buildings often do not allow to place a fairly overall machines, so for these purposes and kitchen facilities, and restrooms. There are other accommodation options. In the absence of the necessary area, laundry complex set even

vestibulesSumming to communication lines.

Connect the washing machine to the water supply and sanitation: main stages

Well, the long-awaited machine is purchased, the packaging is removed, you now need to remove the special shipping details. You also need to remove additional fasteners that secure the drum machine. All of the resulting hole after the screw recesses are closed with plugs supplied. After such events, you can proceed directly to the connection.

Important!It is strictly forbidden to operate the machine to remove the shipping restraint. This can result in damage to the drum and damage the whole equipment.

Draining may be carried out directly in a sewer. If the thickness of 5 cm and more, right at it, you can install the tap. For better compounds using the rubber seal. But this method can be used as a temporary measure, as the waste water can flow back and odor appears in the machine under certain conditions.

Important!when connecting the washing machine water supply and sewage systems need to pay attention to the mounting strength of the pipe. In the absence of reliable fixing of all compounds may lose integrity, resulting in leakage.

Water connection

Connecting the machine to the water is performed by means of special hoses, having a diameter of about 1.9 cm. Such a hose with one end connected to a washing equipment, and the other to the water system. In place of the connection must be present closing valve to at any time had the opportunity to turn off the water supply. Depending on the material from which the pipe is made, where it is planned to connect, sidebar produce a variety of ways.

Metal water pipe

To connect the washing machine to the water pipe, you must first punch valve. If communications are made of metal elements, this is done using a special crimp sleeve. This item consisting of two parts, put in the pipeline and firmly tightened bolts. The required hole is drilled straight through the coupler, and wind the outlet threaded valve.

Related article:

How to set the pump to increase water pressure in the apartment. Classification of pumps to increase pressure in the water flat, their choice and especially self-installation.

Metal-plastic water pipe

If a supply of cold water into the room by using plastic pipes, the special tee is required to connect the washing machine. In another way it is called fitting. In the right place cut out piece of pipe is inserted into the opening tee and carefully seal the rubber gaskets. Then the tap is connected.

Connecting to a mixer

If you want to temporarily connect household appliances to the water, you can connect it to a mixer. For these purposes, too, used a tee. Similarly, the connection can be carried out together summing to the water drain tank.

Connecting without running water

There are times when there is no water in the room, and give up the machine, the machine is not very desirable. For example, at their summer cottage, where the communication is only normal water well or rocking. In this situation, to ensure work equipment is also possible. This will require a hose and a large water tank, which must be installed above the washing equipment. With this arrangement will create the required water pressure required for the operation of the internal pump.

You can also buy pumping stationThat will supply the water if necessary. But this method requires quite serious charges.

Electrical connection

Without electricity, no equipment will not work, is no exception and assistants for washing. three-wire plug and cable is required for operation of the machine for grounding. If necessary use the extender is selected only elements having a grounding. The best solution to connect the machine is considered to be socket, connected to a separate electrical machine.

Important!It is strictly forbidden to equip grounding for water, gas and other pipes and heating radiators. This connection can be deadly!

operability test

After connecting the washing machine to the water supply and sewerage systems need to test the results. First review all available connections, then perform a test run. Proper installation ensures 100% implementation of the following points:

• inner tank pretty quickly filled to the required level;
• at the joints to the water supply and drain leakage does not occur;
• after cessation of water set after about 5 minutes of starting its heating;
• drum should be uniform;
• no extraneous noise during operation;
• the water is drained quickly, without delay.

Test the operation of the equipment is at all possible modes. This will allow the early stages to eliminate the problems and avoid serious damage in the future. If a malfunction nonetheless emerged: any leaking or there is no timely drain, you have to start all over again. The machine must be disconnected from the network, drain and re-re-check the correctness and accuracy of the connection joints and the point of connection.

As you can see, the connection of the washing machine to the water supply and sanitation is not difficult. All used connectors are readily available in any store the sanitary and do not require large expenditures. By following all these rules and subtleties, as well as scrutinizing the enclosed instructions, can be hassle-free and call the professionals to produce such work on their own.