Thermostat: the best solution for those who appreciate comfort

Modern society is increasingly seeking to inventions that allow to use water wisely, electricity and gas. Therefore, in everyday life rapidly break all sorts of sensors, controllers and other devices. Very popular today enjoy thermostatically controlled mixer, which is a multi-functional device serving to maintain the desired water temperature, thus saving energy at its heating.

Thermostatic Mixer: what it is

Mixer with a temperature controller is a device by which there is not only mixing of hot and cold water, but also to maintain the fluid temperature in a predetermined mode. This device also allows adjustment of the pressure water jets, which is especially important for the apartments in apartment buildings.

Considering the structure of the mixer, it can be said that the composition construction includes a housing temperature limiter, temperature controller, the controller of the jet head, the temperature scale. The cylindrical body has two points and summing water spout for its expiration. Temperature limiter represented by a switch located on the right side of the device. It performs the lock device when the temperature exceeds a predetermined value, holding it at the desired level.

Thermostat - what is it? It is produced in the form of a cartridge or cartridge, which changes the ratio of hot and cold water, providing an aqueous stream of a predetermined temperature. Such a process is performed for several seconds due to the moving sensing elements. They are made of materials that exhibit a high sensitivity to any temperature changes. This may be paraffin wax or bimetallic ring.

The high temperature causes the material to expand, and the low - decrease in volume. As a result, the cylinder moves the cartridge opening or narrowing the space for movement of cold water. This is the principle of the thermostatic mixer.

Important! To exclude kinked flap, which is responsible for the access of water of different temperatures, the structure is equipped with non-return valve.

The thermostat switches from step 4 degrees. Each thermostat is equipped with a maximum temperature limiter with a value not more than 38 ° C.

In case of a sharp reduction proceeds in a hot or cold water jet only reduced the pressure and temperature remain the same. If the water does not flow at all, or it is not enough pressure to maintain a predetermined temperature, the thermostat closes the water flow.

Pressure regulator represented head parts, which is located on the left side and provides the switching on and off the water flow, bringing it to the desired mode at the output.

Advantages and disadvantages of the mixer bath with thermostat

The principle of operation of the mixer with thermostat, we can say with confidence that the device is an indispensable element of bathroom fixtures for the bathroom. It is characterized by ease of use, which is provided with the ability to maintain the water temperature in a predetermined mode. No need to periodically adjust the water temperature according to the operation of a centralized system manually.

The device is self-customize the system according to set parameters that will just enjoy the water procedure. This is especially valuable for families with small children and the elderly. This device is also important in homes where there are seriously ill and people with disabilities.

When you turn the water flow thermostat will adjust automatically preset mode. It will be maintained throughout the time of use of water, which eliminates the possibility of scalding or occurrence of the uncomfortable conditions in the case of sudden changes in pressure and temperature centralized water supply.

Important! Mixer with thermostat designed using GROHE Cool Touch technology, thanks to which the item housing is never heated to a high temperature.

Installing the Thermostat is a cost effective measure, making possible to save water and electricity. It does not need to drain the water until it reaches the desired temperature. This will positively affect the payback period of the device, the price of which is quite high compared to conventional mixers.

Installation of such devices is similar to the installation process and conventional device is simple, not labor procedure does not require special skills.

It is worth knowing that the work of the mixer depends on the water flow in both pipes. In the absence of pressure in one of which the valve does not allow water to flow from the other pipe. However, there are models with a special switch that allows to enjoy the water.

The disadvantages of the device are the high price of a thermostatic mixer, difficulties in the implementation of its repair, as specialized centers that can cope with breakage, there are not everywhere.

Varieties shower mixer with thermostat on the type of management

The thermostatic mixers, according to the control method may be mechanical, electronic, or touch. A first embodiment of the mixing-way valve is a simple structure that an affordable cost.

Water temperature is regulated by valves or levers. They provide movement of the valve within the housing in response to changes in temperature. It moves in the direction of the tube, which creates more pressure, reducing it. The water temperature in this case is the same. Such a valve with thermostatic regulator has two - temperature and pressure. The first is located on the right, and the second - on the left.

Electronic mixer with temperature control, has a more complex structure and high cost. To ensure its performance, you must connect the device to a power outlet. There are stand-alone models that run on batteries. Crane control with temperature control by means of buttons, touch panel or remote control. Electronic control sensors operate on all parameters of water, the numeric values ​​are displayed on the screen. This embodiment differs mixer comfort, versatility and appeal.

Among the new-fangled technology can distinguish non-contact device that, thanks to the sensitive infrared sensor responds to light touch. Enough to bring his hand to the body - and pour the water from the tap the desired temperature.

Despite the ease of use, the touch faucet has significant drawbacks. In order to fill the container with water, you need all the time to keep in the action zone of the sensor arm. Quickly change the temperature of the water given possible with the help of thermostatic mixers for the kitchen, equipped with single-lever mechanical control. Costly options are impractical for routine changes in water temperature. In addition, there is no possibility to control the water supply period, which is a significant drawback in question resource saving.

Useful advice! Touchscreen Thermostat is advisable to install in the kitchen: it allows you to turn on the water, not tap smearing dirty hands, which creates comfort in the cooking process.

Varieties thermostats depending on the application and installation process

Depending on the purpose of thermostatic mixers are central or used to operate at a single point. The first variant of the device represented by the structure with a single center, which could be used for multiple water supplying places. Such a mixer is installed in areas with high traffic. It can be sports complexes, industrial environments. This option is also suitable for residential homes, where water supply is available a few points: shower, bidet, washbasin.

Important! Purchase Service and one central type thermostatic mixer economically advantageous than the installation of several elements.

Mixers three-way valve for use in a single point, graded according to the functional load. All of them are divided into instruments of overt or covert installation. The devices are used for the kitchen, wash basin, bath and shower stall. Kitchen faucet with the thermostat can be mounted on a wall or countertop sink open manner, and can use an indoor installation. In this case, within sight and remain spout faucet valves. All other elements are hidden in the wall. To do this, purchased Built-in mixers with thermostat.

However, the installation of thermostatic mixer in the kitchen is not always justified. This is due to the fact that the need to constantly change the temperature, depending on the type of activity. For cooking need cold water to wash the food should be warm and dishes - hot. Constant temperature fluctuations adversely affect the performance of the device. In addition, in this case, its value is reduced to a minimum.

Types of mixers with a thermostat bath and shower

Washbasin Thermomixer able to fully cope with the task of maintaining the water temperature relative to a predetermined mode. Vertical model with a spout to drain the water can be mounted on the sink or a wall. The design of thermostatic mixer for bath and shower are included spout and watering. Such a device is performed predominantly of brass with chrome plated.

Useful advice! Shower can establish a universal Thermomixer long spout or cascade-type model, which provides a release of the water flow broad band.

Thermostat battery for shower stall has only a watering can. Variant convenient in use and installed concealed manner. The visibility zone are pressure regulators and temperature, while the remaining parts of the mechanism hidden in the wall.

Shower can be installed push options Thermomixer. To bring the device into operation it is necessary to click on the big button. Water for some time will elapse, then stops.

Depending on how you install thermostatic mixers are horizontal, vertical, floor, wall, flush mounting and options, which are attached to the side of the sanitary device. Built-in thermostatic mixers similar in appearance to the product for the shower. They are characterized by the presence of a special tank for wall mounting.

Related article:

Storage water heater 80 liters vertical plane: the benefits and principle of operation

Principle of operation. Advantages and disadvantages. Selection and care. Review of popular models.

Which is better to choose a faucet with a thermostat: materials for manufacturing

When choosing a high-quality and durable thermostatic bath mixer is important to consider some points. First, we should pay attention to the construction of the body material. Here, ceramics, plastic or metal can be used. Ceramic products have an attractive appearance, but has poor durability, susceptibility to mechanical stress. This is due to the fragility of the material, as noted in the review. Faucets with ceramic thermostat have a relatively high cost.

Faucets metal body may be formed of bronze, brass or copper. Such products are quite reliable, strong and durable. Among the main disadvantages of metal Thermomixer is their high cost. There are cheaper models made of metal alloy - silumin. They differ, however short-lived, as evidenced by the numerous reviews. Bath mixer with plastic thermostat is the most affordable option, but is characterized by the lowest life.

Attention is also drawn to the material from which the cartridge for a thermostatic mixer valve. It can be leather, rubber or ceramic. The first two options are characterized by low cost, but they are less wear-resistant and durable. These pads will quickly come into disrepair in the event of a water solid particles.

Ceramic valve is more reliable. It is able to push out the solid particles that have come to his body. Such an element has a graphite coating that prolongs the period of its operation. However, due to the fragility of the material to be fastened to the valve stop with great care not to damage the integrity of the head.

Useful guidelines for choosing a quality mixer with heated water

When choosing thermostatic mixer for bath with shower, you must ask the wiring diagram of distributing water pipes. European manufacturers offer sanitary devices created by their own standards, where the hot water is supplied to the left and cold - on the right. Russian designs suggest the reverse order of connection. When installed will not have problems. If you select a device manufactured according to European standards, it is necessary to alter the order of the feed pipes.

Important!In the case of miswiring of the pipeline break device immediately.

Many popular models are equipped with a safety valve, which serves to prevent accidental changes in water temperature. Such an element has the form of buttons, which is painted red. To change the temperature of the water is sufficient to overcome it. This option is particularly valuable for families with young children.

before installation thermostatic mixer for hygienic shower It is recommended to install a filter in each line, that will exclude small particles from entering into the device, which sums water. Clogging of a negative impact on its work and will reduce the durability of operation. It should be remembered that the advisable thermostat mixer set on pipelines, where the pressure is provided at least 0.5 bar.

Review of popular manufacturers best Thermomixer

Popular manufacturers that have proved themselves from the best side in the market plumbing fixtures are the company Grohe, Jacob Delafon, Oras, Hansgrohe, Lemark, FAR, virions.

Useful advice! When choosing thermostatic mixer should pay attention to the model designed by national standards, where cold water is supplied to the left, and hot - right.

Grohe German brand offers the widest range of products, which are of high quality performance, reliability and durability. The product catalogs are presented with thermostat taps Grohe, having a different design and a variety of options. The company produces a whole range of unique design devices that are real works of art. Due chrome plated brass housing provided with hygienic and attractive appearance Grohe mixer thermostat shower.

Domestic manufacturer produces high-quality thermostatic mixers virions, which are characterized by reliability and durability. A distinguishing feature of such devices is the use of cartridges Vernet French production. To create them, apply the polymeric materials of high quality, providing efficient, accurate and long-lasting operation of the mixer.

French manufacturer of Jacob Delafon offers a wide range of high-quality mixers with thermostat, which are made of ceramic. the device casing is made of brass. Good value for money differ thermostatic taps FAR. Mid-range model produces Lemark company.

Oras company offers products at cost, accessible to each of the average buyer. Thermostatic mixers mostly made of brass and plastic.

The German company Hansgrohe produces thermostatic mixers, which are highly durable, reliable, durable, affordable cost and concise design. chrome steel is used for manufacturing the casing.

The best models Thermostat bath with shower

One of the best models is thermostatically controlled mixer for bath Grohe Grohtherm-1000 34143000. It is equipped with a safety valve which allows the discharge of water at a temperature up to 38 ° C. The model is a brass body of cylindrical shape with a shiny chrome finish, whereby protection products generated from abrasion and corrosion. Such a mixer with a GROHE thermostat has an attractive appearance thanks to what will fit into any interior design bathroom.

The apparatus is equipped with a ceramic adjusting valve that is rotated by 180 degrees, reflux valve, dirt filter, which protects the device from the negative impact of poor water quality. The mixer is installed vertically on the wall. Price device is 12.7 thousand. rub.

Very popular thermostatic bath mixer Grohe Grohtherm 2000 34,464,001. The model is considered to be one of the best. The device is equipped with two controllers. The housing is made of brass with chrome plated. The cartridge is made of ceramics. GROHE Thermostat bath is equipped with a check valve, integrated filter and aerator. Mounting device runs vertically open way. The water supply is carried out noiselessly in a waterfall. Buy this mixer can be of 16.2 thousand on average. rub.

It is a good model thermostatic mixer Oras Nova 7446, which is a double-lever device for a shower bath. The product is made in a brass housing. Equipped with a long spout. The kit includes a device for nozzle-aerator comfortable showering. The model boasts a stylish design. The cost of such a mixer is 16.5 thousand. rub.

Well-proven single lever thermostatic model with mechanically operated Hansa Cube 58,352,101. It is designed for a bath with shower. The body is made of brass with chrome plated high quality. Due to the unique Hansatempra technology eliminates the possibility of scalding. The mixer is equipped with the dirt filter and non-return valve. Buy mixer can be from 18 thousand. rub.

The best models of thermostats for shower budget series

A good option offers manufacturer ZORG. ZR Model 116 W MLADA - it is a single device, which body is made of brass. Its surface is covered with chromium that protects the product, giving it an aesthetic appearance. The cartridge contains the ceramic element. Such a mixer is a shower, it is attached to the wall. Mixer works pretty quiet. It is further equipped with an aerator.

The best model among faucets with thermostat for hygienic shower device ZORG ZR is 116 W MLADA Italian manufacturer. Such a thermostatic device is robust, wear resistance and durability. The body is made of brass, cartridge - ceramics. This model is mounted on the wall, creating an aesthetically pleasing appearance. Price embedded thermostatic mixer is only 6.6 thousand. rub.

A good model with a long spout Thermostat Thermo Lemark LM7734C. It is a versatile device that is equipped with a long hose with a watering can. operation of the device is controlled by the pivot arm, which is performed by stepless adjustment of temperature and pressure. The model is made in copper-brass enclosure with chrome coating. The mixer is equipped with a shutoff valve. Mounted on the wall of the open way. Buy the device can be from 8.2 thousand. rub.

Important!This device can be operated at low pressure in a water system.

Another model is the Czech brand Thermostat Thermo Lemark LM7732C. The apparatus is equipped with a short spout tap for a shower, a watering can and aerator. Return valve and filters available. Housing in brass coated with chromium performance. A special feature of this device is that it can be mounted on the bath rim, which is especially convenient for angle models. Ceramic cartridge differs reduced size. Near the hose is embedded mode switch. The cost of the thermostatic mixer is 9.5 thousand. rub.

A popular model is the Double Wishbone Thermostat Hansgrohe Ecostat 13114000. the device casing is made of brass. The model is equipped with a long spout for easy watering and taking a shower. The device is attached to the wall. Buy this mixer can be from 9.8 thousand. rub.

The sequence of execution of installation of a thermostatic mixer

Algorithm mounting modern devices virtually indistinguishable from the traditional method of installation of the valve or the valve lever. It is important to observe the connection scheme.

Thermostat has a well-defined nodes to connect piping hot and cold water. They are marked to eliminate the error during installation, which will lead to incorrect operation of the equipment or its breakdown.

The sequence of installation of the mixer with thermostat for sinks and baths as follows. The first thing shuts off the water in the riser. Next performed dismantling of the old device. By the pipelines must be attached disks for a new mixer with eccentric. Pre-installed on every thread filter. Further installation is performed pads and decorative elements on the intended places. Produced screwing spout and watering (if any).

Useful advice! Thermomixer any wall can be mounted on the bath side, using for this special area, which is screwed to the sanitary units.

Setting mixer embedded in the wall, it suggests the presence of a small hole, which is inserted into the mounting block. There are all the elements of the mechanism. The visibility area is a circular or square plate with two valves arranged one under the other. With their help, the temperature adjustment is carried out and water pressure.

After installation, the water connection. The device is checked for serviceability. The first step is done calibrated with the aim of adjusting the water temperature. This adjustment is performed by using a special screw, located under the protective cover of the mixer. To do this, armed with a screwdriver and household thermometer.

Important!When installing the faucet with a thermostat it is mandatory to install a check valve on the water supply system.

The repair process of the thermostatic bath mixer is best left to professionals. Independently can perform a cartridge cleaning of plaque and dirt that is performed under running water. In case of detection of worn rubber seals they need to be replaced with new ones. It is also necessary, if found leaking water from the tap under the spout.

If during operation originated unpleasant noise during operation, set the filters or to provide a snug fit to the body of the rubber pads.

As the reviews, thermostatic mixer today is very popular because of its numerous advantages. The only significant drawback is the high cost of high-quality and durable products. However, for true connoisseurs of comfort, convenience and safety of the installation of this product is the best solution.