A flow heater for tap electric

Water heater valve - compact and easy to use device

Electrical flow heater for tap: Fitting the device and procedure

When the apartment is not very hot water, set the powerful boilersAble to provide hot water all the water points. In the context of periodic interruptions in the central hot water supply, is much more advantageous to set the electrical flow heater for tap. It is a small device having the form of a thickened middle part of the crane. This thickening is powerful electric heating element and the water flow sensor.

Related article:

How to choose an electric instantaneous water heater. Using a heater in the apartment. The source of hot water for domestic use. Features electric flow boilers.

Device performs the heating water flow method. That is, the water flowing through the device is contacted with a TAN and heated. Power is regulated by a rheostat, the handle of which is located on the unit. In most cases, the range of adjustment is defined in the range of from 40 to 70 degrees. Since the flow heater, and the level of heating may vary depending on the water pressure in the system.

The structure of the flow of the electric heater on the crane

These devices are equipped with always and necessarily protective electronic device RCD. It is designed to instantly disable the device from the power supply in case of power breakdown. This avoids the risk of electric shock. RCD installed directly on the mains lead of the heater. Among other things, there is protection against overheating within the housing. It is activated by reducing the flow of water in the system.

Useful advice!lest instantaneous water heaters protection has not worked, it is necessary to monitor the water pressure in the system, and are not put on the long rheostat to maximum.

Common sizes of compact heaters mounted on the crane

Installation of electrical flow water heater valve is made easier than all other hot water appliances. It does not need any additional components. Primarily we produce the removal of the ordinary mixer with washing, which closes the water inlet valve common apartment and unscrew the flexible liner. In place of the crane set up device and connect thereto through a flexible hose fittings threaded connection 1/2. Cord equipped with RCD connect to the home network of 220 V. After that tested RCD, which presses the "test" on his body. The device should turn off.

If all goes well, then click on the big button. All instantaneous water heaters installed the water flow sensor, which signals the automation of the turn on the tap. Therefore, to run the device, simply open the tap. A few seconds after that will heat the water, and it will be the right temperature.

Instantaneous electric water heater on tap is very easy to install

Useful advice!To the resumption central hot water supply, the device could simply not be included in the network, it is necessary to becoming independent of the main valve. For this washing drilled hole with the same diameter as that of the crane. To him screwed Water heater and the flexible liner attached to the pipe through the coupler with cold water. In this case dismantling the main crane is not required.

Since the power flow of electric heaters for a small crane and lies in the range of 3 to 5 kW, the separate wiring is required. However, by using more powerful instruments should, in agreement with the management company, to conduct a separate cable from the counter of the desired section.

The external structure of the flow-through water heater faucet

Overview of the various models of the flow of non-pressure water heaters

Many well-known companies produce non-pressure flow water heaters, which are installed directly on the tap. they are all needed for the supply of hot water is only one-WATER point and have a lower power consumption. Consider some popular models:

• a brand like "Aquatherm" is familiar to the consumer. His instantaneous water heaters have a beautiful appearance, quickly mounted and equipped with filters, purifying water. The heating element in these devices has a very high grade of reliability. The apparatus is protected from overheating and RCD. The water is heated rapidly to 60 degrees with the heating element, 3 kW. Cost models of this brand starting from 60 US dollars;

The electronic circuit within the flow valve on the cylinder

• water-heater "Electrolux" has several modifications of different power which varies from 3.5 to 6, 5 kW. Devices of this brand have all degrees of protection, both on the current injury, and overheating. Their design is perfect for any kitchen or bathroom interior. Instantaneous water heater Electrolux - one of the most famous brands on the market. At the same time, prices of water heater-valve produced by this company, starting from just $ 30

Choosing a water heating device, it is necessary to pay attention to the brand and specifications of the device. Their choice depends on the installation location of the device. If it is meant only to apply hot water to the kitchen to wash the dishes, then fit the weakest power low-cost brands. When the water heater will be installed for filling the bath with hot water or shower, you need to choose much more powerful devices.

The color and design of the water heater can be selected under the general style kitchen

Useful advice!To check whether you are satisfied with the heater power, you must find the capacity of a known volume. Then you need to turn on the tap to the desired pressure and measure the time for which the container is filled with water the desired temperature. If 10 liters nabezhit for 2 minutes, then this pressure is enough for a shower. Less pressure can be used to tap only.

Reviews of the instantaneous heating water tap

People have different attitudes to the instantaneous electric water heaters on the crane. Reviews about this device is evidence of this.

The compact water heater capable of heating water within a short period of time

"Our city does not differ particularly from other cities on the quality of the supply of hot water. So I bought a water heater, which is placed directly on the valve. I advised him of my good friends, which currently houses it has long been set. Set it was not difficult. People said that there will be a lot of electricity consumed, but I somehow did not notice a big difference when paying for electricity. Now, I understand - the tap is turned on after a short time washing dishes. On the whole, satisfied with me, though of course completely replace hot water it can not. "

Alexey Kazakov, city Yekaterinburg.

"Instantaneous electric water heaters on the crane, reviews of which I have often heard before, began to enjoy a year ago. I bought it for the soul. Unfortunately, I made a mistake in the choice of instrument. The pressure in our water system is small, so the water is very poorly run by watering shower. At the same time it is very much time to heat up in the device. We have to somehow adjust. In general, in my circumstances, I became disillusioned with the instrument. "

Nikolai Ustyugov, city Salekhard.

Water heater with an electronic temperature indicator water heating

"Yesterday installed a faucet flowing water heater. Now the hot water in the kitchen will always be. Finally I saw the wife stops. The device works normally, I head in the water is sufficient for him. The device I purchased expensively with a temperature controller. It is very convenient, and allows you to set the desired temperature without increasing or decreasing the flow of water. In general, I am quite happy with the instantaneous electric water heaters on the faucet and leave a review so positive. "

Yuri Alexeev, city Saratov.

The characteristics of some types of instantaneous water heaters, it is possible to understand that they can be used only for one-WATER OUTLET. To provide hot water throughout the apartment, we need devices with much greater capacity.