Assembling the house from the SIP panels - taking over the experience of the West

click fraud protection

Building a house from SIW panels - pluses and minuses

Such a panel consists of two oriented chipboard or OSB, between which a layer of expanded polystyrene is glued as a thermal insulation. The panel size 1.25 x 2.5 m is standard. The thickness is from 120 mm to 220 mm.

SIP has high strength and is energy-saving. Styrofoam, which is a part of the board, is durable, resistant to the effects of biological and chemical media. The ease of the plates greatly simplifies the transport and installation of SIP panels. The operating costs in the SIP facilities are much lower. The walls and corners in such buildings are perfectly flat and suitable for almost any kind of decoration.

The disadvantages of sandwich panels include fire hazard, since expanded polystyrene is a highly flammable material. When burning, it releases toxic substances.

The environmental friendliness of polystyrene foam also raises doubts, because it emits toxic styrene. According to the manufacturers, styrene in the surrounding space is detected in very small quantities, but this substance has the property of accumulating in the body.

Assembly of self-supporting insulated panels - preparation for operation

This article is a short instruction on the installation of self-supporting insulated wire. Before starting work, it is best to make sure that all necessary materials and tools for the installation of SIP are available, namely: screwdriver, drill, thermo-knife, hammer, screws, sealant, mounting foam. Also it is necessary to protect a little and itself - respiratory organs and hands.

Shelf for SIP panels is used for burning grooves in expanded polystyrene. It works from the electrical network.

Installation of the house from the SIP panels begins with the waterproofing of the foundation and the installation of the binding board or bars, which serve as the basis for the installation of the floor of the building.

Floor installation , assembly of SIP-panels for which is carried out at any time of the year, is made both along the axis of the house, and across. Plates must be placed along the perimeter of the structure in such a way that the angle of the first plate rests on the corner of the bundle bar. The panel is attached to the strapping with screws 240 mm or 300 mm. All joints are carefully faded.

Installation of SIP panels - basic stages of operation of

Now it is possible to implement installation of SIP panels on walls. A bar is attached to the ceiling, which serves as a guiding contour for future walls. Through the beams and slabs holes are drilled, and the whole structure is fixed to the foundation with the help of anchor bolts.

Walls are erected, starting from the corner of the house. At right angles to the already installed first panel, the second one is placed, the connecting groove of which is previously foamed. The remaining plates are connected by a spike-groove system and fastened together with self-tapping screws.

Interior partitions are installed simultaneously with the panels that form the perimeter. Technological grooves of all slabs must be carefully delineated. The construction of the remaining floors is done using the same technology.

After the assembly of the SIP panels of walls and ceilings is completed, it is possible to proceed with the roof installation .Since the plates have sufficient rigidity and strength, the roofing system with their use does not require the installation of rafters. The plate lies on the Mauerlat and the ridge beam, which is installed between the pediments, and fixed with screws. If it remains unclear how the SIP is assembled, the video will help you understand the technical issues.

instagram viewer