How many outlets need in the house: expert advice

It often happens that the house was sorely lacking outlets. You can use extensions, but they are strongly knocked out of the interior, and spoil the aesthetic appearance of the room. To avoid these problems it is necessary in advance to calculate the approximate number of access points to the mains.

In different areas, this value varies, but either way, after counting, the final result better add 1-2 sockets. This will protect you from unforeseen circumstances. In this article, we will present our vision of the number of charging sockets in the main room and show you how to carry out their installation.

Installation socket - step by step guide

Step 1. The first thing you need to remove the cover. After that, remove the screw that secure the wire. Threading wires into the slots and fix them with screws.

Step 2. Metal legs weaken, moving closer to the center of the socket and attach to the Escutcheon. Next foot reduced to its original position, thereby locking the structure.

Step 3. Make sure that all wires are connected and are functioning normally.

Installation - a good thing, but before it is necessary to determine where and how much you need to build in sockets.

Corridor

In the hallway, the use of sockets is not particularly common. Major appliances: a router, a fixed telephone, electric bell and intercom system - basically they are all connected directly to the network. Otherwise, you need 5-6 sockets. Additionally, you can build another 2-3 cells.

As a result, we have about 8 outlets for corridor space.

a guest room

In our time, the classic elements of the living room can be considered: television equipment, acoustic system, additional lighting sources, places for charging equipment at each seating. Approximately 10 turns outlets. This value will add two spare cells.

As a result - 12 Outlets for the guest room.

Bedroom

Take the average statistical bedroom for two persons. Each near his bed should be located an additional source of lighting, as well as sockets for charging laptops and smartphones. To this was added 3 spare sockets.

According to the results obtained about 9 cells for electrical connection.

Room for study / work

In this room, as usual, it contains a large number of modern electronic hardware. Therefore, here it requires a large number of connectors under the "fork". If we consider more particularly the socket required by: a monitor, a speaker, a system unit, a lamp and printer. Just leave a margin of several cells for additional equipment.

As a result, the whole room will need 10 outlets.

Sanitaryware

Typically, in the bathroom a bit of free space, and so it can be located only a few pieces of equipment. These include the water heater, the machine for washing and drying clothes. In addition to classical techniques, the connection to the network require an electric shaver, hair dryer and other portable devices. More recent versions can be found bathrooms with heated floors, as well as additional lighting around the mirrors. Add to this a few spare cells.

As a result, we get about 8 Outlets at Sanitaryware.

Kitchen

The place where the number of electrical devices per unit area is higher than average. As standard, the kitchen can be arranged: freezer, electric stove, dishwasher, cooker hood and other appliances overall. It is also hard to imagine the cooking process without small assistants: mixer toaster Multivarki, microwave oven, electric kettle.

In order to meet all possible needs, you must at least 10 outlets.

What you should pay attention, in addition to the above,

Remember, in order to process vacuuming did not deliver a lot of trouble, it is desirable to close up 1-2 connector near the entrance seats or doors in every room. If the room is spacious enough not to do more than its outlet in opposite ends.

With experts who will deal with your wiring, it is necessary beforehand to discuss all possible options installation of sockets, it is worth considering that for some non-standard electrical appliances must be socket. Thus you will be able to observe all necessary safety precautions. This is especially important when installing the oven or refrigerator - this technique requires special conditions to the mains connection.