How to keep fresh renovation for a long time - the most effective tips

After the high cost of quality road repair would be desirable that the result of feast for the eyes as long as possible. But time and neglect will transform the once cozy room in the hut, where I want to run as soon as possible. How to keep the interior nice long? Effective Tips to care for different types of finishes - on.

Ceramic tile

Tile - one of the most commonly used types of walls and floor rooms with high humidity. If the tile is not receiving proper care, it is covered with moisture or soot, her dry dirt, and the joints are clogged with fat. To prevent this, the surface of the need to regularly take care of.

Advice from experienced housewives:

• In case of kitchen, daily wipe abutting against the work surface area, tiled, soapy water with a sponge or cloth. This will significantly reduce the time for general cleaning. In addition, the kitchen would be nice to go and the constant purity creates a fresh impression of repair.
• AT bathroom wipe the tile soapy cloth at least once a week
  the entire area of ​​the room. Thus, you will continuously remove the precipitated dust and dirt give eats into the surface, forming a thick layer.
• Beyond the kitchen tiled need to take care of with the same frequency: the soot from the gas stove settles on the surfaces regularly and if you do not delete it in time, at a time will make it very difficult.
• Do not wash the glossy tile metal objectsorabrasive materials. Otherwise, the surface quickly lose its luster, and the deposition of the scratches.
• To care for a matte tiles use protective emulsion. The substance is used after cleaning and protects the tiles from the micropores tamping of dust, grease and grime.
• The joints between the tiles - one of the most vulnerable places finishes. If the tile surface can be protected by a glossy layer of the grout is not covered by anything. Regularly clean the seams between tiles brush with stiff bristles (provided the use of epoxy grout). And are not washed them with acid.

Even at the stage of repair give preference to an epoxy grout. It will cost more, but will pay for itself quickly through improved performance properties.

Wallpapers and their features

Care for walls, wallpapered has its differences, depending on the type of coating and conditions of use.

Tip! Common rules for all types of wallpaper: Do not use for cleaning the surface of the liquid, a part of which contains the solvent.

Caring for the wallpaper, depending on the material:

1. acrylic wallpaper washable, safe and durable. To maintain them clean coating can be safely wash water.
2. paper wallpaper afraid of moisture, so they can not be washed. Protect them from dust accumulation is possible by means of regular vacuuming with a soft nozzle or pen-brush broom.
3. Wallpaper on a paper basis It should be cleaned with a dry cloth. If the surface is painted with moisture-resistant coatings, it can be wiped with a damp, soapy sponge.
4. Wallpaper from the usual vinyl clean with a soft slightly damp cloth, and the surface of the CD-vinyl can be washed clean non-corrosive substances.
5. velor Wallpaper can not be called practical. Nappy deposition on the surface actively attract dust, and wash it prohibited. When using a vacuum cleaner has a risk of damage to the material, so turn on the vacuum cleaner to a weak power and use a soft tip.
6. serigraphy resistant to moisture and mechanical stress. Antistatic coating makes this wallpaper to attract dust, so they almost do not need to care. Such a surface rarely enough to wipe with a damp, soapy sponge.

Do not start finishing up the sorry state.

Step by step instructions for the care of the liquid wallpaper and decorative plaster

Caring for a decorative plaster does not use water. Plastered surface can be vacuumed time to time. In terms of washing - pay attention to the paint, where the walls are painted.

Liquid wallpaper afraid of moisture, so they should not be washed. Fine contaminants are removed eraser, and more serious stains - by replacing the fragment.

Step 1. Take a damp sponge and soaked section of the wall with a spot on the wallpaper.

Step 2. Remove the trim with a spatula, trowel or tissue.

Step 3. From inventory liquid wallpaper preparing a small amount of the mixture. If the stain is small, but extended, you can add to the mix and just footage.

Step 4. Apply the mixture on the wall of a conventional method for liquid wallpaper.

When the surface is dry, the walls are again ready for operation. Do not start a beautiful renovation, and the wall will always be as good as new.