How to quickly fix a hole in the drywall, a simple step by step guide

click fraud protection

Drywall - an excellent material that is suitable for the device arches, walls and partitions, as well as all sorts of furniture and decorative designs. However, the strength of the material is not at the height of the unfortunate incidents and no one is immune.

The hole in the plasterboard wall - not uncommon. And if you accidentally, holding up a long cornice or dropping a heavy object on the wall, damaging the surface - do not despair. Eliminate such damage is possible without a major overhaul.

That need work

Depending on the complexity of the damage on the wall may require a different set of tools.

But as a rule, it is in the arsenal of each:

  • simple pencil and a square;
  • Knife Drywall;
  • hardware;
  • narrow and wide spatula;
  • Hacksaw on a tree;
  • screwdriver;
  • container putty mixtures.

Of the necessary materials would need: or universal finish filler, wooden slats, a reinforcing tape, drywall (and scrap would be sufficient), PVA glue.

Eliminate damage to themselves: small holes

On the wall due to the careless handling may appear dent, small chips or through-hole. They all have different technology fixes. Let us consider briefly the process of repair of various types of dents.

If the plasterboard were properly twisted hole of screws or other similar sized holes, they can be eliminated by using acrylic sealant or putties. Simply fill in the indentation of materials and smooth spatula. When the material is dry - sandpaper and apply a finishing material.

Repair small holes:

  1. align the fracture, Clearing the end edge of the opening. Eliminate crumbling fragments of plaster and pieces of torn paper.
  2. pass primer resulting slice and the region around it.
  3. Form a hole the size of a paper wad or Cut a piece of foam. In fact you can use any material for sealing a hole. The main requirement for it - the availability.
  4. Lubricates the "patch" glue on the edges and close the hole. It is important that such an improvised tube does not protrude above the surface of the wall.
  5. When the glue hardens, "patch" cover with putty and trim.

In this manner, are embedded in the wall opening diameter 3 cm. If damage has larger dimensions, drywall trim used to patch. For this damage expands and leveled, circular opening is formed. The most convenient way to do this using a drill with an attachment "crown."

From commercially available stock material fragment is formed on the same circle diameter. Slice and circle the primer coating. After it dries - lubricated with putty and a patch is embedded in the hole. Excess putty leveled spatula.

Eliminates a large hole - step by step guide

Step 1. Before you begin, it is important to assess its scope. Measurable lesions hole based on the result of tracing the contour of the patches existing in drywall stock.

If the material is left in the pantry fragments - you can always ask for a slice at a friend not to buy the whole list. By measuring the hole itself, add approximately 2 cm on each side and cut the patch slightly larger.

Step 2. Gently with a knife construction cut patch, strictly follow the contour of the hole.

Step 3. We apply the resulting patch to the wall at the site of injury, encircle pencil. Then cut out the contour-cut in the wall with a knife. When cutting the wall should be careful.

Step 4. According to the size of the hole measured out the two pieces of wood, is added 4 cm to each and cut the necessary pieces. We put the bars set in the hole and inside by means of screws. In this case, the bars will be a support for the patch.

Step 5. To this support fasten existing patch, lightly pushing it in the material of cap screws. Fining loop patches reinforcing tape cover damage primer and filler. When the material is dry - we put the decoration.

The complexity of further work will depend on the material finish. In the case of paint, it is necessary wall fragment is the ideal alignAnd then paint. In the presence of tiles - glue the missing pieces. The easiest way to disguise the place of repair, if the wall is decorated with liquid wallpaper. Successful repair!

Like this? Subscribe to our feed Yandex. Zen

2017-2018. Copying of materials is possible without preliminary negotiation in the case of a direct hyperlink to our website.

instagram viewer