Plasterboard is a popular building material intended for wall, ceiling and walls in buildings with high and normal humidity. Allocate these types of plasterboard: normal, moisture-resistant, fire-resistant and acoustic (characterized by high sound insulation). As compared with other materials for finishing and mounting surfaces of drywall has a number of advantages.
7, the main advantages of gypsum board (GCR)
Fire safety
Excipient "core" is a gypsum drywall that is resistant to fire. So the fire of the material is quite high. In case of fire can illuminate only the upper layer sheet located on the side of fire. In addition, for security purposes, you can purchase a fireproof drywall, which is not exposed to fire.
Flexibility and ease of use
Plasterboard malleable to any modification. Thanks to this feature of the material is possible to implement any ideas: arches, rectangular stages, difficult terrain, and others. In order to bend the sheet, it should first be slightly moistened. Then, the material can bend at any angle without fear that it will break.
In addition, gypsum board is easily cut and sawed, and in the sheets themselves easily cut holes of any diameter and shape. In case of deformation or damage GCR be rapidly repairable.
Humidity resistance
Special water-resistant drywall sheets are characterized by their ability to repel moisture. Such sheets are often used for walls and ceilings in the kitchen and in the bathroom. In addition, water-resistant GFC virtually destroyed and resistant to damage.
Creating a comfortable environment
Ordinary plasterboard is a vapor, and therefore environmentally friendly material. In areas with high humidity moisture is absorbed in gypsum evaporates, without stopping in the sheet. Therefore, in the rooms, trimmed with plasterboard, there is no moisture. In the case, if the air in the room becomes too dry, moisture GCR selects, fried in gypsum, back into the room. Thanks to this particular material is set in a comfortable climate rooms.
thermal insulation
For warming the room GCR it is one of the best options. It greatly reduces heat loss, thereby improving the thermal insulation of the room. For the best effect can be insulated with mineral wool or GCR foam. This variant is suitable for particularly cold rooms.
Hiding communications and defects of the walls, ceiling
If after finishing the walls formed a kind of niche, they quite convenient to "hide" Communication, covering them with plasterboard. However, in this case, it is desirable to make the inspection door. Then, in the case of any fault with the wires or communications do not have to dismantle the entire structure in search of a place of breakage.
Also, the material is perfect to hide irregularities and other defects on the surface of the walls or ceiling. But an added bonus would be the heat insulation and sound insulation of small building.
Another definite plus GCR - high adhesion. By the material is dense and easily glued other finishing materials (tiles, paint, wallpaper, etc.).
Suitability for further finishing and affordability
Surface-finished gypsum board, subject to any other decoration: painting, wallpapering, the use of tile, plaster, etc.
In addition, GCR itself - affordable material, so it is quite popular among the builders. For example, it is much cheaper to hide the irregularities of the walls under the plasterboard than eliminate it. Indeed, in the latter case you will have to buy cement, sand, wipe materials, then spend plastering. And the result may not meet expectations. While the use of drywall will quickly, cheaply and without much dirt to correct irregularities of the walls of the problem.
2017-2018. Copying of materials is possible without preliminary negotiation in the case of a direct hyperlink to our website.
