How to embed hinges in interior doors: step by step guide

Wide range of products allows construction companies to repair any level, choosing comparable in price and quality materials for all categories of citizens. The correct choice of the door - residents collateral security, and well-chosen interior design provides the comfort of home owners for many years. But the door - not a vacuum cleaner, and in addition to buying it is still important to properly install. It fasteners are key here, of the correctness of their tie depends largely on the continued operation of the door. Read more about the kinds of loops and sidebar - on.

types of shelters

The main criterion for selection is the hinge side of the door opening. Yourself awnings come in different forms.

Mortice sheds

This is the most primitive and widespread species. The design consists of two parts of equal size and shape. By the door is fastened with screws. To the door can be closed without hindrance, the fixing plate is placed in a specially prepared grooves.

Mortice sheds attracted by its versatility, as are suitable for most types of doors. opening side in such a loop, and you can change it by simply flipping a canopy.

Sheds Surface type

By design, overhead canopies like the mortise. They also only one open side, they consist of two identical elements, different from the bite type only installation method: here it is even easier. For plates do not need special grooves, loops simply mounted in front of the door and inside the box.

Loop "Butterfly"

This is the most practical option for the interior door. The name of the elements was due to their characteristic forms, in the open state canopies resemble nothing else like the wings of a flying moth. Due to the shape of loops in the closed state of the canopy has a thickness of one element. When the canopy is closed, one wing of the "butterfly" is clearly part of the other.

When installing these loops is important to choose the right hardware. Their hats should be fully immersed in the grooves of sheds, or simply the door will not close. Loop type "butterfly" can not be fitted too heavy door panels, as they made of thin metal, are of openwork form and are, in addition to the functional element, and further decor.

The nuances of installation

The principle of the installation of all types of hinges approximately similar. One of the attachment plates fixed to the end portion of the web, the second - in the door frame. It is important to be precise, so that after the installation did not work, so that the door is not included in the box due to the fact that the loops are fastened too high or too low.

Tools required:

• yardstick;
• plummet;
• building level;
• pencil;
• screwdriver.

Consider a phased installation instructions loops on the example of surface-type canopies.

Step 1. One of the attachment plates putting a loop to the frame, in its upper part, check the flatness with a plumb or level, and are screwed with screws. Also act with the plate and another canopy - fasten it to the bottom of the box.

Step 2. Putting a door leaf to the box, so do the necessary support to meet the desired height mounting. On the door carry appropriate labels.

Step 3. Mount in the end part of the second door fixing plate according to the markup. For ease of installation, the loop can be taken apart.

Important! At the beginning of installation of loops is not worth much to tighten the screws, so that if their mistakes were easier to dismantle. Finally, to strengthen the loop possible after they are fully installed and tested.

Tips and possible difficulties

There is a kind of universal type loops, which only comes in one-piece version. This greatly complicates the installation of paintings and inexperienced installer may even need outside help.

If initially on the door leaf was incorrectly made markings, it will lead to a change in the location of shelters and, accordingly, damage to the web. Especially it is necessary to be careful when performing layout for mortise hinges. With their irregular inset way back will be gone.

Also remember that eating was not originally to calculate the number of loops and the weight of the door, the design quickly to shatter and will become worthless. The average weight of the door varies in the range from 2.5 to 8 kg. Accordingly, the type and number of sheds directly depend on this value. The maximum height of the door - 2.2 m and most often only two loops on the structure.