After the completion of all construction works in the bathroom there is a need to conceal all pipes and communications from prying eyes. Typically, this is done using special screens. Such a method is not only to give the aesthetic appearance of the bathroom, but also to obtain a large enough space to store the necessary economic detail.
Depending on the desired functional future design, there are several types of screens:
- Deaf and monolithic. The most simple design for mounting profile with their own hands. However, it should be understood that if there was an extreme need for repair or replacement of pipes, a similar design to be completely disassembled.
- Sliding. Significantly saves space in small-sized rooms, and the copes with the task to completely close all pipes.
- With hinged doors. This option is perfect for the spacious rooms. When non-standard forms of baths purchase the finished structure is impossible, because it is made by hand.
- Brick type. It is considered the easiest option to install their own hands. To this solution was mixed cement, water and conventional sand. Around the perimeter of the bath put a brick pillar, and in the future simply closes the door to specialized shelters. The space between the bricks and the bathroom should be strengthened with foam.
- Plasterboard. Aluminum or wood profiles made frame. If the choice fell on a tree, before installing the material must be treated with special trains, which will significantly increase the term of use, regardless of the number of the room humidity. For fixing screws used profiles. After direct mounting frame attached to it panels of plasterboard.
- MDF. Installation of panels produced in the same way as setting screens for baths of cardboard-gypsum panels. However, a material such as MDF, Doponitelnye requires specialized processing solutions that will greatly help to increase its service life. To not formed mold, you should think in advance vents.
- Of plastic panels. It is considered the most common and popular option to create a screen under the bath. Enough low cost, resistance to moisture and high threshold make it possible to wear this design with their own hands. For this purpose, a metal frame is set, the profile is secured across the bath. It is not necessary to mount a similar product with screws - so greatly disturbed his appearance.
Step by step guide screen installation
Step 1. Exclusively on the vertical level set first strip of plastic products, it is done from the edge of the wall.
Step 2. The second piece suitable as close to the first.
Step 3. The inner surface of the next strip is placed special glue, and with it is fixed to the first plastic panel.
Step 4. Likewise, all subsequent panels are installed.
Such type of screen can not execute an additional decor to yield an ideal surface. With further need to remove all the internal communication, the panel can be easily disassembled.
The final stage of work
- To complete the TV in the bathroom, it is necessary to close up all cracks and joints, which could be formed in the process.
- Through these actions, the further operation they do not get the excess liquid.
- For the most reliable sealing experts recommend to apply a thin layer of silicone sealants.
- Before you complete all the work, you must wait for the complete drying of materials.
Professional advice
- To create the necessary external screen type, according to the project, priobretaytte several types of profiles.
- When decorating of brick, cement is acquired instead of adhesive solution.
- Do not use the monochrome shades of tile - it will create additional difficulties in the care of her.
- Note the mosaic screen when decorating. Unusual solution will complement the decor in the bathroom.
2017-2018. Copying of materials is possible without preliminary negotiation in the case of a direct hyperlink to our website.
