Meter reading for electricity: transfer the data the most convenient way

In this article, you can learn how to transfer the meter readings for electricity: transmit data on energy consumption in various ways, all of which are discussed in the text. It also describes the characteristics of each data transmission method of accounting of the equipment: the order of the procedure, its advantages and disadvantages and recommendations for consumers. A data transmission system in various ways on the example of JSC "Energosbyt Plus".

Meter reading for electricity: to transmit information in different ways

Tenants of apartments and private houses are given the opportunity to maintain a comfortable living environment, namely water, electricity and gas supply. In this case, the obligation imposed on them to make timely payment for utility bills and report evidence of accounting devices, supporting consumption.

There are many ways to send meter readings for electricity. Subscribers can choose the right option, which will save time and effort, it does not have to worry about being late.

How to take readings of the meter

The scoreboard or display any of the accounting unit of electricity displays information on how many kilowatts of electricity spent the consumer. Existing regulations and rules oblige subscribers to carry out removal and transfer of readings for electricity each month.

Useful advice! It is recommended to perform this procedure in the same day, prior to payment of utility bills.

The procedure for reading data from the meter:

1. Armed with a sheet of paper and a pen.
2. Verify counter serviceability and correct readings.
3. Overwrite the data with the display board or on paper. For conventional devices with the rate that data are only one component. Dual-rate instruments require the removal of two indicators: the number of kilowatt / hours spent night and day. In trehtarifnyh counters accordingly need 3 values ​​are indicators of the electricity consumed at night, during the day and during the period referred to semipeak.
4. Below, write data received in the last billing period. These numerical values ​​are smaller in magnitude than the current counter indicators.
5. Calculate difference between current and previous indications.
6. The obtained result is multiplied by the value of 1 kW of electricity at the rate assigned to the data area.
7. Fold obtained under all tariffs sum to be paid.

For a three-digit counter (instruments with the point located before the 3 digits after the decimal point - 1) the maximum value of 1000 kW / h. Four-instruments (counters with 4 digits before the decimal point) can display a maximum of 10,000 kW / h. After reaching an accounting value of the equipment is reset.

How to check the electric meter on the correct reading

Before submitting meter readings for electricity, you must make sure that it works correctly. Surface inspection is visual inspection of the device for troubleshooting:

1. The numbers in the display should look clear and legible.
2. The absence of flashes on the electronic display.
3. No damage on the outside of the device.
4. Integrity of the seal.

Note!For a complete test, additional tools and accessories: calculator, stopwatch, incandescent 100W and multimeter.

Full counter check as follows:

1. Verifying the connection device.
2. Check the disc for arbitrary rotational movements.
3. Counting errors in the measurements.
4. Check the degree of magnetization.

It should indicate that the verification of the level of magnetization devices may have some difficulties. Mercury Instruments, Energomera Neva sealed anti-magnetic seals-stickers that change color under the influence of the magnet. Checking the level of magnetization of such devices will ultimately lead to fines when employees come to the meter calibration without removing and see the state of the stickers. Therefore, caution should be taken to perform this procedure.

The final stage readings of light: Data transfer

Consumers of electrical energy provided lots of ways to transfer account information from the instrument. The list includes both traditional methods and modern, involving the use of telecommunications technology.

Subscribers can send the meter readings for electricity by:

• inscribing digital values ​​from the device in receipt intended for payment of electric energy;
• transmit readings over the phone to the relevant organization;
• transmission of information via the Internet (using a special Internet resource or the user's personal account on the site energy supplier);
• housing department or visit one of the offices of energy supplier.

Note! Transmission of indications with accounting devices should be carried out within the established period, ie until the 26th day of each month.

How to transfer meter readings for electricity over the phone

Transmit data for electricity meter via telephone can be in different ways. For this purpose, it can be used:

• call-center;
• connection with the operator;
• An SMS-message.

and they all have advantages and weaknesses, however, allow a timely manner to convey an information stand in queue unnecessarily.

How to pass a light meter readings via the call-center

Telephone communication allows effortless transfer performance amount of electricity consumed. To do this, you need to contact the call-center. Contact phone number, you can usually find on the receipt. It is located in its upper right corner.

By dialing the contact phone number, the user is given the opportunity to listen to the answering machine successive recommendations. By following these guidelines informant possible to transfer the readings for electricity over the phone. The duration of the session, small - only a few minutes.

With this number, everyone throughout the day can contact the help desk for the transfer of personal data on energy consumption, which saves time and nerves.

How to transfer meter readings of electricity through the operator

Run mandrel data displayed on the meter, the operator can use the phone. To do this, contact the energy retail companies. It is also allowed to use numbers SBC.

This method, in addition to the obvious advantages, has its drawbacks. In practice, electricity consumers have to face the following challenges:

• often on the dial it takes a long time;
• long wait on the line before you can obtain a connection to the operator;
• a high probability of errors in the records for voice information transfer.

Note!In order to control the transmitted indices employees produce electricity verification, verification deadlines set by the manufacturer of the equipment accounting. Information about this is contained in the meter passport.

The cost of checking of electricity meters:

Name checking service	price, rub.
The single-phase induction type meter	285
Alternating electronic type meter	530
Three-phase electronic type device	690
Three-phase induction type device	470
Accelerated procedure 1 business day	+100%
Accelerated procedure 3 working days	+50%
Accelerated procedure 5 working days	+25%

How to transfer readings of electricity meters via SMS

Today, many consumers are wondering how to send an SMS reading of electricity meters, because almost all the energy supplying companies provide such an opportunity. It uses brief text messages sent from mobile phones.

This method involves the transfer of power readings on the personal account via text message. For this purpose there is a special room, as well as the circuit for inputting information. For each tariff provides a course of action that is specified in the memo. It is contained in the receipt of payment for electricity.

Consumers living in settlements located away from the city, can transmit readings of electricity in the personal account via SMS. Also, this method will be beneficial to citizens, who are unable to connect to the Internet. Service to the public free of charge.

Note! In this case, subscribers do not need to dial the operator to carry out sending readings to transfer electricity data at any time, because the SMS message service is provided round the clock.

A reliable way to transfer readings for electricity: in the office

Energy supplying companies also receive data about the world, to testify for the electrical energy can be in one of the offices. This method of sending accounting information is considered one of the most reliable, because the consumer submits the data directly into an organization engaged in the supply of electricity. The procedure can be used to pay for energy costs not only for the previous month, but over the period called mezhraschetnym.

Where to submit the data of electricity meter: a review of energy sales companies

Each user can transmit power readings for electricity distribution and sales one of the offices of the company, for which it secured area.

List of energy sales companies:

Company name	service Areas
Atomenergosbyt	Enterprises nuclear sector
Oboronenergosbyt	Russian Ministry of Defense Consumers
Boris and the IRB	Borisoglebsk (Voronezh region).
Voronezh Energy Retail Company	The territory of the Voronezh region.
Sverdlovenergosbyt	The territory of the Sverdlovsk region.
Orenburgenergorosbyt	The territory of the Orenburg region.
Tambov Energy Retail Company	The territory of the Tambov region.
Komi Power Sales Company	Komi Republic
Kola Power Sales Company	The territory of the Murmansk region.
Mezhregionenergo	Enterprise group "Gazprom"
Marienergosbyt	Mari El Republic.
Tatenergosbyt	Republic of Tatarstan
Mordovia Energy Retail Company	The Republic of Mordovia
Power Supply Company Bashkorostana	Republic of Bashkortostan
GRINN Energosbyt	The territory of the Voronezh region.
Rusenergosbyt	RF subjects (18 subjects)
Energoservice	The territory of St. Petersburg and other regions of Russia
Nizhnovatomenergosbyt	Krasnodar, Voronezh, Rostov region. and etc.
Mosenergosbyt	Large deliveries in Russia
Kolanregionenergosbyt	The territory of the Murmansk region.
Power Supply Company of Moscow Region	The territory of the Moscow region.
Regional Power Supply Company	The territory of Zheleznogorsk and region

Note!Each organization listed in the table, allows transfer counter electricity through one of its offices located in the city. Driving delivery performance can vary, but in general it is standard and simple.

How do I submit meter readings at payment receipts

Previously, you could apply when transferring readings for light data by the post office. Today, these methods are obsolete, so post offices are not used to transmit information on the calculation instruments and payment notifications. Instead, at a time when the calculation is performed for electricity, postal employees enter data into special forms of automated type.

Holders of plastic cards there are other ways to transfer data around the world. counter readings are transmitted via an ATM when the performed payment receipt. Computer offers subscribers consistently meet clearly defined instructions that are displayed on the screen of the ATM. In the process, the filling of informative credentials on electricity.

The advantage of this method lies in the fact that electricity consumers simultaneously performs two tasks with minimal application effort: conveys working hours and making payments on utility bills without any additional Commission.

Related article:

How to transfer readings for Energosbyt light with a box for receiving data

Consumers are taking into account the electricity readings to file information with the help of special boxes designed for that purpose. Boxes energostavlyayuschim owned companies and allow to transfer data.

To use this method, you must fill in the appropriate box on the paper form, or make a counter in the separation performance counterfoil. After that, you just delete the document in a special box.

Note! Boxes for indications for convenience are placed in public places. More often containers for the collection of accounting information can be found in post offices, shops or offices of the energy supply company.

How do I submit credentials for electricity over the Internet

Modern technologies allow to electronically keep records of electricity readings, pass the information on counters in this case in several ways:

• via e-mail;
• through the user's personal account on the Internet resource of the energy supplier;
• with the help of specialized Internet services.

Using e-mail and personal cabinet

When transmitting on the light meter reading personal cabinet, as well as e-mail, allow electricity consumers to inform energy suppliers of spent kilowatts without leaving home.

To transfer data via e-mail, you must know the email address energy supplier. It should send a letter with the following information:

• apartment number;
• a personal account of the consumer of electric energy;
• the testimony of the accounting unit.

Messages received by e-mail are processed automatically. It uses specialized software, requiring refuse entry superfluous words, signs and symbols. For this reason it is necessary to closely monitor the correct input readings for the light, the frame information with an error then make processing impossible.

The function of sending meter readings using a personal account can take advantage of any consumer of electricity, owning skills of using a computer. Visiting the page of the official Internet resource of electricity supply company, you can easily send data. This will require to fill in all the fields.

Useful advice!Page personal account allows you to perform other useful tasks. Users can view statistics, pay utility bills online, receive news.

Using the Internet service to transmit readings

Automated data transfer services allow you to send electricity performance without the expense of time and a personal visit. To do this, visit the center's website.

After that, the user is prompted to do the following:

1. Press the "Send counter".
2. When the corresponding page, you must enter the customer account number (9 digits). It is written in the upper right corner of the payment receipt. you need to click the button that says "Press" to move to the implementation of further actions.
3. In the box to be displayed one of the values ​​in the column numbers accounting device which is placed on the receipt. Be sure to see to it that at this precise signs until the gaps were introduced. After that you need to validate the information entered by pressing the "Yes".
4. Appears on the screen to enter the table reading the accounting unit. You must enter the appropriate figures in front of the counter. Here, the user can view information that was entered earlier.
5. you need to click "Yes" to confirm the above actions. The data will be sent and processed further.

Note!These services allow users to print a spreadsheet with the data. Besides it is possible to correct the incorrect information in the same day or in one of the following. It should indicate that the adjustment data on the day of entry permits changing parameters in a smaller and a big party. On other days, these values ​​can only increase.

How to transfer meter readings for electricity Energosbyt: an example of the current scheme

After the abolition of special boxes for transmitting information Energosbyt began to experience difficulty in servicing customers. To get rid of the new scheme to save consumers time was developed by long queues.

This process has been optimized. Today, it consists of several independent channels transmitting readings by cost hardware instead cancellation branded boxes. In addition to the development of new data transmission channel, this scheme involves separating process dates. This allows you to distribute the load and make an effective optimization.

Driving data on the example of "Energosbyt plus"

The proposed indication modes of transmission of electric power in JSC "Energosbyt plus":

1. The transmission of information via the receipt - the method is positioned as the most convenient and involves the transfer of readings while making payments for utility bills in the HCS. The procedure is available for the entire month in the Federal State Unitary Enterprise "Russian Post" and OJSC "Sberbank of Russia". To do this, the electricity consumer has to complete a self-evidence in the receipt and send it.
2. Submission of data through the terminal of OJSC "Sberbank of Russia" - terminals allow the organization to carry out the transfer of evidence, and make them pay for a month.
3. Transfer parameters with the help of Internet resources - for these purposes can be used by a personal user account or special services. The service is available from 18 th of any month to 26th of the same month.
4. The transmission of information via information and payment terminals or kiosks - these devices are installed in the offices of "Energosbyt plus" engaged in service and sales. The procedure can be performed during the whole month.
5. Sending data via SMS messages - the service is available to all subscribers of mobile operators. For this purpose the consumer of short numbers.
6. Transfer readings over the phone - the operation is performed in the period from the 10th to the 26th of each month.

All mentioned in the article transfer means suitable for informing the energy supplying companies. This system allows each owner of an apartment or private house to choose the most convenient way transmit meter readings. Moreover, the subscriber can plan your schedule based on the proposed dates.