Lifting gates for the garage: size, price and features

Lifting gate - one of the most convenient ways to check everything in the garage. They are easy to install and use. However, along with all its advantages, they have a considerable cost due to complicated design. Consider whether you can make them yourself, as well as basic characteristics possessed by lifting the gate for the garage: size, price and operating principles.

Lifting gates for the garage: size, price, types and characteristics

any goal, Which opening is due to lift, called lift. They are divided into several types, each of which has its own characteristics.

Rotary sectional doors - solid construction, the lower part of which extends forward in the process of opening. The main part of the gate when it comes fully into the garage premises. Outside, there is only a small visor. On the one hand, their transportation to the place, as well as the installation requires a lot of effort, but on the other hand - this is the best option when it comes to self-manufacture. Price up-and-over doors are much lower than the sectional.

Lifting sectional gates do not require free space, as all sections are arranged horizontally. When it comes to such gate professionals have purchased and installed, this option is far more popular. Also, in small portions, this type of design allows to use the maximum amount of space for arranging the yard.

Lifting and slewing garage doors are arranged such that in the open position looks like a visor, disposed horizontally and slightly advanced. The use of such a system has many advantages that have made it very popular.

The operating principle of the rotary-lift gates

The main advantage of rotary-lifting equipment - a fairly simple mechanism of action. Among constituent elements emit frame web and guides that provide movement around its axis. Thus, gate change their position from vertical to horizontal.

As a base used by a steel frame, which is mounted in the garage doorway or behind. This is the leading part of the gate. If its production make your own, this is done using metal pipes with a rectangular cross-section.

At the moment of opening of the gate are utilized lift arms, and the roller mechanism, which allows movement of the gate guides, fixing them at the top. The entire lower portion of the web at the same time rises, forming the ceiling a kind of visor. In this position, the spring compensating the maximum available, while they are stretched when the door is closed.

There are two types of opening mechanism: hinged-arm and counterweights. The first option is simpler and at the same time reliable. He is very popular to use as devoid of danger and locking system ensures easy movement of blades for the required trajectory. However, the major requirements for the system can be called the adjustment of spring tension and quality installation rails, installation which is to be made with high accuracy.

The second embodiment is based on the counterweights, constructed as follows: a special cable is attached to the lower corners frame and passes through a special unit and a counterweight, which is mounted on the opposite side of the winch. Such a system is preferable, if it is a serious weight goal.

Useful advice!It can be equipped with lifting system electric gate with a remote control.

Advantages and Disadvantages of overhead doors

If we compare the design with other overhead doors, several distinct advantages are:

• strength and integrity of the fabric provides reliable protection against burglary and penetration of the garage;
• the material from which made the gate, does not corrode and does not lose its properties under the influence of external factors;
• in the open position does not take up much space, thus it can be installed even in a small area;
• after installation can be trimmed by various facing materials, including rigid inserts and panels;
• It may be further insulated using special polystyrene panels;

• opening system can be both manual and automatic;
• They can be installed in a single and double garages.

Like any other structure in the lift gate has its drawbacks:

• Installation can be made only in a strictly rectangular openings;
• when the gate is open, they will reduce the height of the opening of about 20 cm;
• integrity of the fabric does not allow the repair of its individual sections and, in the case of damage, it is necessary to replace the whole thing;
• spring structure, which is responsible for raising and lowering of the gate, is designed only for a specific weight that is taken into account at warming. If the total weight of the structure is too large, the need to install additional balances;

• after installation between the web and the slot opening may remain, which can be sealed by a rubber seal. However, in this case, the garage should not be heated.

Standard sizes lifting garage doors: the price of different models

Price lift garage door is made up of many factors of which are:

• web material of manufacture;
• the quality of the lifting mechanism;
• the presence of an automatic control system.

When it comes to the cost of the gate, we can confidently say that it largely determines the quality and durability. Cheap gates are likely to soon require repair or replacement of individual elements of the mechanism, so excessive savings here is misplaced.

Another important nuance, which should pay attention to - the thickness of the fabric, which is used for the gate. Depending on the material, it may be from 1 to 45 mm. If we are talking about the use of sandwich panels, the thickness up to 20 mm talks about the cold model, more than this figure - insulated version.

To date, buy lifting gate in the average quality of the garage can be for 16,000 rubles. The maximum price of lifting the gate at the garage reaches 50,000 rubles (fully equipped). Consider some of the most popular models, their features and prices:

Manufacturer	Features	The dimensions (width and height) mm	price, rub.
"LegProm" (Russia)	The possibility of additional installation of an automatic drive, guaranteed number of cycles of use - 25000	2000-6000h1800-3100	by 35000
"SIBARS" (Russia)	Automatic sectional doors on remote control. Thickness "sandwich panel" of 40-60 mm	2000h1800	by 22225
«Zaiger» (Switzerland)	Insulated sectional doors with panels of 53 mm thickness.	2100h1800	by 26312
«Alutech» (Russia)	Availability of adjustable roller brackets provide control abutment web to the aperture	2700h2100	by 35659
«DoorHan» (Russia)	The requirement to the lintel - 90mm. Full automation. Adjustment brackets in 2 planes	2000h1900	26900
"Roots" (Russia)	Automatic sectional doors on springs. Large selection of color and texture solutions	2500h2390	30900

AT garage arrangement gates play an important role, since it is their every day you have to open and close. And how easy is this design, in many respects depends on saving your time and effort. So when the need ceases buy overhead gates in the garage, the price is not always the deciding factor.

Self-assessment and standard dimensions of lifting garage doors

Another important factor that affects the cost of the garage door - their size. To order individual designs or in the manufacture of their own hands, we can calculate the required dimensions on their own.

For example, 1.8-2 m - standard width for a passenger car. The dimensions of the garage door, respectively, should be a little more to ensure free entry, hook on the opening side portion without risk. For this it is necessary to provide a margin of about 0.5 m on each side. The result obtained will be about the width of 3 m. The same principle can be calculated and the desired height of the gate. The average amount to 2.1-2.5 m. These are also the standard size garage door.

Useful advice!If you are the owner of a small car outside the box, do not make payments on the basis of its data. It is better to buy a lifting garage door standard size. The car eventually will be replaced, but completely dismantle the system will be difficult.

With regard to the acquisition of ready-sectional designs, there is a standard size overhead doors for the garage is largely dependent on the manufacturer. This is important because many models have their own characteristics, due to which their installation in opening the wrong size will be impossible.

For example, the Belarusian company Alutech commercially available models, for which the minimum lintel It is 45-51sm, while most other manufacturers, this figure does not exceed 31 cm. In addition, the large role played by the mechanism used. This can be a tension spring or torsion bar. Each manufacturer sets its own pace, creating a table the size of the garage overhead doors.

And although today producers are ready to fulfill almost any individual order, it is important to know the exact size of the required design as every 5-10 cm - it can save about 5 thousand. rubles. It is best to contact a representative of the manufacturer, which you choose to buy up-and-over door, and discuss all the details. In addition, you can invite a specialist at home, which will hold all the necessary measurements and save you the trouble.

Lifting gates with their hands: how to carry out the installation yourself

Make the gate for the garage with his hands quite possible. To do this, you only need to choose the drawing improvised overhead doors for garages, as well as follow the steps below to use. Consider each work step to the construction from the beginning to the end.

The choice of materials for the up-and-over doors with their hands

All the materials for the gate to be selected in accordance with what mechanism do you plan to use.

Consider the example of fabrication of the simplest embodiment of homemade. You will need:

• wooden bars of various sizes 12x8 cm (for boxes) and 10x10 cm (ceiling);
• metal strip;
• corners for the frame size 3,5h3,5h0,4 cm;
• corners to rail size 4h4h0,4 cm;
• Bracket trough size 8h4,3h0,5 cm;
• spring (inner diameter 3 cm);
• need for tension control section metal rod of 0.8 cm.

In addition to this you will need the web, as well as the electric drive, which will provide automatic opening and closing of the gate. There are three options for the web that can be used to create lift garage door with his own hands: wooden shield, topped with metal plates, sandwich panel or whole web.

If we talk about completely independent manufacturing and installation, it is best to fit the shield of planks topped with sheets of galvanized iron and a layer of protective composition. If you want to provide additional insulation, it is possible to use polystyrene foam, or foam insulation in the mats.

Useful advice!To make the goal more attractive from the outside, they can be clad with plastic or wooden panels.

Before you buy the necessary materials, experts recommend to see as much of thematic materials on how to make a garage door with his own hands: drawings, photos and video.

Assembling the garage overhead doors with their hands: drawings and diagrams

In order to carry out the construction assembly, you need a rad tools:

• level;
• hammer;
• marker;
• drill;
• screwdriver;
• welding machine;
• Bulgarian;
• spanners;
• drill.

Once you've made sure that all the ingredients you have, you can proceed to the design of the system. The easiest option in this case - to carry out all the necessary measurements and opening found on the Internet ready to appropriate drawing. You can try to make a sketch of your own, but it is quite troublesome and tedious task, as the slightest mistake can lead to the fact that the design just will not be in place.

Focusing on the existing drawing, you are ready to purchase materials and to begin installation. The first step is to assemble the bars of the box. Bonding between themselves they can use the special metal plates or angles. The main thing is to fit the box to the gap in size and can be fixed therein by means of pins.

Useful advice!In order to provide additional strength to the structure, the lower frame part must be recessed into the ground by at least 2cm.

Installation of the door leaf

Once the frame is ready, its sheathe the shield and the coated sheet material. Basis of the mechanism is made from the corner as follows: using a drill in the same shelf is necessary to drill 2 holes having a diameter of 1 cm. They will serve for fixing the longitudinal struts. Three more holes made for securing the spring bracket on the bottom shelf. In order to secure the trough bracket is done 3 more holes in one of the shelves, according to the drawing overhead doors for the garage with his hands.

Further, the bracket and the spring are interconnected by means of a special adjusting plate, which is made of iron bars. Spring clinging to his bottom turns. And its lower part joins the tension adjuster, made of wire.

Thus, one side is a ring, and the other to be threaded. Using Area (0.85 cm), wherein the bore holes is mounted a hinge assembly. It must be welded to the frame midway between the hole for the lever, which is responsible for lifting mechanism, and the lower edge of the frame. The distance from the opening to the lever must be 12 cm.

By means of the welder plate with a hole for the controller attached to the end of the lever. Then just have to make the rails, which will carry out the movement of the mechanism. For this purpose two corner drawn together so that the distance of 5 cm between their tops. One edge of the resulting shape is welded to the plate with holes.

In the calculations, it is important to respect: a guide space must be preserved to 8 cm between the lower edge of the cross member and the axial line. If the result of the work, all turned out this way, it is possible to weld the segments sill to reverse the edges of the rail, while respecting a distance of 14-15 cm. Using a conventional bolt connected to a ceiling bar and channel.

Useful advice!In order that the resulting design look more attractive, its paint. All places inaccessible mechanisms need to paint even before construction is assembled.

Will help to better understand the mechanism of the device and mount a lifting gate with his hands video and photo instructions.

Lifting gates for the garage with his hands: additional recommendations

In addition to general manufacturing techniques, there are some additional tips that are given by experts, as well as those who have collected such gates yourself:

• do not give up welding and choose the more simple, at first glance, fastening methods. So you have to drill holes is much smaller, and thus more reliable attachment;
• opening height must not be lower than 2.2 meters, otherwise it would be inconvenient to use;
• thus it is necessary to consider that between the upper part of the opening and the ceiling also has to be a certain distance - approximately 0.35-0.5 m;
• if you had to deal with a relatively low opening, it is best to position the rear drum;
• be sure to leave a small groove in the lower profile of the web. This will provide an opportunity to set the seal;

• to ensure long and reliable operation of the system, the total fabric weight should not exceed 100 kg;
• to make the drive for overhead doors with their hands, you can use the reverse self-locking winch and as a remote to use a modified car alarm;
• to provide additional coverage of the garage, in the web you can make additional insertion of a light transmission material;
• special locking devices help prevent jamming, as well as help protect the gate from hacking.

After listening to all these guidelines, you will be able to produce a design that is functionally equivalent to the purchase yield. In addition, she will be able to protect premises, not only from the weather and other environmental factors, but also from intruders.

A more detailed description of how these tips, you can view the video can be realized. With his hands lifting the gate for the garage can be fitted with all the latest technologies that are available today in the finished factory models.

If you use drawings, photos and video, overhead gates with their own hands will not yield to the purchased almost nothing. It is only important to show a little patience and diligence to the daily use of the garage has become more comfortable for you.

If you use drawings, photos and video, overhead gates with their own hands will not yield to the purchased almost nothing. It is only important to show a little patience and diligence to the daily use of the garage has become more comfortable for you.