A fence made of wood with their hands: make out the border area

Due to the ease of processing and high ecological wood is a popular material for fences

Fences made of wood by hand. Photos of current options

wooden fencesFraming area gardens may have different shapes. For their construction are used lumber, edging and not edging board, timber, strips, as well as bars and tree branches. Protections can be filled with solid or lumen, with the arrangement of elements vertically, horizontally, at an angle, in one or two rows, with smooth and wavy edges, and with inserts different patterns.

Stylish wooden fence decorated with creepers

The most popular are such variants wooden fence with their hands, a photo which clearly illustrate their design:

• "Ladder" or "herringbone" - this type of fencing is characterized by the horizontal arrangement of the boards between the legs at an angle and overlap. Externally, this design resembles the shutters: the space for fence not seen, and the oblique gaps pass air and light;
• "Checkerboard" - fencingIn which vertical elements are placed in two rows, shifting them in a checkerboard pattern. This fencing both sides - the facial. Fence safe harbor yard from prying eyes and at the same time has gaps that are visible only at certain angles;

Different variants of wooden fences

• "Braids" - sampling the original design, obtained by the horizontal or vertical interlacing boards. Erection of a fence woven with their own hands is not too difficult, costs are low, and the appearance is quite decent. In vogue plaited fences branches or twigs mainly used for decorative framing small suburban areas.

This is not a complete list of wooden fences. Many perform fences, combining in one design fence and wood lattice or combined with a metal, stone, brick and other materials. Get original and inexpensive design can be achieved by the construction of the fence edging the board with their own hands. Photos of these structures illustrate the ingenuity and individuality of their manufacturers.

Traditional fencing, painted in bright colors

A fence made of wood with their hands: useful tips

To design their own hands set of wooden picket fence or other type of fencing has turned out strong and durable, you should follow some guidelines:

• support posts to be mounted with the use of special shoes to expand the support area, which will provide structural rigidity;
• uprights should be placed in increments of 2.5-3 m;

Original fence around the grounds of a country house

• not recommended for painting wooden fences oil paint formulations: a coating flakes and crumbles under the influence of natural factors;
• fixation elements for fixing desirable to use a zinc coating, little susceptible to corrosion;
• make sure that when using self-tapping screws and nails, they do not damage the structure of the tree.

Adhering to these recommendations, you can avoid frequently made errors when installing a wooden fence in the country with their own hands. Photo self-erecting fences made of wood, found in large quantities in the network, demonstrating the various stages of the work.

Decorative fence of wood decorating garden

Wicker fence with their hands. Photos rustic fences

In recent years become popular ornamental fences made of wood by hand. Photography such enclosures indicate that their main purpose is not protection, as symbolic stylized frame and ornament infield or small its area. Quite simple in construction hurdle fences. Having studied step by step instructions, you can learn how to make a woven fence with their hands.

Wicker fence looks unusual and original

Types woven fences

Depending on the height, the method of weaving and destination, wicker fences can be divided into several groups:

• 1 m high - low horizontal fences weave. They are set to frame flower flower beds, Large trunks of trees, wells, as well as to indicate the tracks;
• height from 1 m to 1.5 m - in such a hedge using horizontal or vertical braiding. Serve to delimit the territory into zones, for example, they can be separated from the rest zone vegetable beds or garden allocate space;

Fence with horizontal weaving frames flowerbed

• in height and 2 m - may serve as a security fence and mounted on the outer perimeter of the infield. There can also be applied to both horizontal and vertical weave.

Useful advice! To the fence served as long as possible, opt for its manufacture or hazel rod. This fence will stand for more than 10 years.

Extend the life of hand made of twigs Wicker fence helps careful handling of raw materials with an antiseptic solution.

Kinds of trees for weaving a fence of vines

Preparation of materials and tools

For the erection of a fence woven with their own hands will be required:

• metallic or wooden stakes;
• stalks of willow twigs;
• sledgehammer;
• secateurs, knife, wire.

Twigs collected in spring or autumn, choosing the most equal branches as possible. After collecting the shoots should be dried and collected in bundles for storage. Before the fence device (15 minutes before weaving) to impart flexibility the bars, their thoroughly soaked or steamed. After laying the woven branches dry and attain robust design.

In a bed with a fence of twigs planted bushes of strawberries

To prepare the skeleton wooden or metal stakes. To set in the ground support is not subject to decay, prepare a trench around the perimeter fence of the future and its bottom covered with sand. Because of this moisture will drain quickly and pass through the sand base in the ground.

Useful advice! To make the design of woven fence strength recommended support stakes zaglublyat not less than 0.5 m.

For the carcass braided fence is necessary to prepare metallic or wooden stakes

frame device and netting fence

The frame fence satisfied from stakes spaced 50 cm apart. It is this distance will facilitate comfortable wicker vine. In places closure fence line, installing wooden posts for collection is performed with a smaller step. This makes it possible to fix the ends of the quality of woven twigs.

If the future construction will have a height exceeding 1 m, the metal bars are used instead of wooden stakes. Their pre-painted in color, imitating wood. Such a frame will be more rigid and more resistant to the effects of damp environment in the soil.

Fence with vertical bars

If horizontal weave selected, it starts with the bottom row and end up at the top. Supporting columns entwined with vines in the form of "eight". To fence not twisted, you need the upper ends of wooden poles nailed to a flat strip, which can be removed before netting the last row. To give the aesthetic appearance of the fence needs to be done so that the ends of the branches were located at the rear side of the fence.

Various methods of braiding vines hedge

To fence of twigs was solid, it is necessary to link the ends of the rods to each other with wire. Protruding ends are cut with a knife or shears, while the remaining part of the last row of rods is charged along the support pillars.

For a more natural appearance to the fence bars of different lengths are used, thereby masking the joints.

Fence in a rustic style, made of twigs

sampling device made of planks with your hands: the photo, the stages of erection

Build a fence made of wood with their hands, you can by using the board with the size of the cross section 15h2,5 see. The length of the board is selected depending on the intended height of the fence. Traditionally, the fence height is set from 1.5 to 2.5 m.

Preparatory work

The first step is marking the fence line. For this purpose, around the perimeter of the infield clog small (50-60 cm) pins with a pitch of about 2 m. Between pegs tensioned cord construction. Tieing stakes, you need to make sure that the cord was stretched enough and does not sag. It will then prepare the necessary length of the board is necessary.

Modern look plank fence

Boards can be cut by yourself or order a ready material to length. All boards are ground on the machine or using a grinding cup on a drill. The ends of the boards can be left flat or cut them in the shape of a semicircle or triangle. Processing edging board with your hands, you can save a lot of costs for the construction of the fence.

For poles harvested wooden beam with the size of the cross section 75x75 mm, 50x50 mm. The number of beams is calculated from the total area of ​​the perimeter. To use the guide with the cross boards 10h2,5 cm.

Solid type of fencing with horizontal boards

How to install poles for fences

Before installing the supporting columns, it is necessary to drill holes to a depth of 0.5-1 m in places where the stakes dug. Pits satisfied using borax (manual or electric). For uprights used with a timber section 75x75 mm. Before installing the supports need to handle well the part of the timber, which will be in the ground.

The treatment is performed by holding the lower portions of wooden poles in the impregnating antiseptic for 48 hours. After this, the pillars must be thoroughly dried.

Driving device wooden fence

Further protect the wood from rotting rack can be achieved by concreting. The bottom of the well is filled a small (1/3 of the depth) of a layer of sand and crushed stone, poured water, the timber is filled with concrete and mortar. While the concrete is grasped, the support slightly lifted to allow the solution to penetrate the base of the rack. Next, using the level or plumb beam mounted vertically.

In order to make sure that the height of the vertical supports of the same, you need to score in the top end of each beam and nail tightly pull the cord between them. The resulting line will show how well matched the height of all supports. For complete drying of each support is given at least three days.

Unusual wooden fence in the yard of a private house

Apparatus plank fences

When all the vertical supports are installed and aligned, start the installation of the horizontal guides. They usually have a 25-30 cm above ground level and distributed on equidistant distance from each other. For fixing use nails, the length of which will allow the timber to break and bleed the board and at the same time will act as 1.5-2 cm from the back side. These protruding tips neatly folded along a wooden plane.

Installation of fences, edging board with their own hands

Next, start a covering board. For fastening use nails or screws. According to your desire to strengthen the boards can be close to each other or to leave some clearance. Once the fence is assembled completely, the tree is covered with varnish, allow to dry thoroughly and paint composition, resistant to environmental influences.

Wooden fence "herringbone"

Very popular and aesthetic wooden fence "Herringbone." In order to build such a structure will also need to make the layout of the perimeter line and set the vertical supports as described above.

Combined fence made of wood and stone. Boards are located, "herringbone"

The main feature of the horizontal fence "herringbone" arrangement of planks is angled and overlapping. To achieve such an arrangement, it is necessary to fix a vertical column of the lining of the tree (In the form of steps), or use the channel, which can be easily inserted at a small board slope. Moreover, boards can be arranged not only horizontally, but also vertically at an angle.

Related article:

Beautiful fences for private houses: interesting photo of fences. Types of fences, photos of different options. Fences made of wood. Enclosing structures of metal. Buildings made of stone, brick and concrete.

Filling the horizontal sampling frame starts with the bottom row. Board fixed to the uprights and the guide beams. Further overlapping is mounted next row of boards.

Useful advice! For enclosures with little clearance, as well as to ensure ventilation between the boards placed cushioning material.

EXAMPLE fence "herringbone" horizontal type

End edges boards must carefully align. For example, it sets row by row, and after each run are aligned edges. Before attaching the boards to be processed protective structures and apply a double coat of paint.

Features of the fence "Checkerboard"

Wooden fence "Checkerboard" due to the fact that the boards are mounted on the front and on the inside, has a more attractive appearance. Such a fence can also be laid in a horizontal or vertical direction. From this it depends on the position of the beams. The distance between the boards and independently selected fence may have slight gaps or be continuous.

The fence "Checkerboard" between the boards are allowed small gaps or guard may be solid

After installation of all vertical supports fixed guide beams. For ease of installation in the supporting pillars organize slots for dividers. If metal supports are used, they are welded corners, which is placed beams.

To get an accurate location of the chess board, you must first identify the site of attachment of each plank. Such markings allow for excellent filling fencing sections, eliminating the possibility of forming different gaps between the boards.

This type of fence may be performed in the horizontal or vertical direction

Quite original looks checkerboard enclosure made of vertically or horizontally laid edging boards.

Following the simple guidelines and advice of experts, you can gather with your hands beautiful and durable fence made of wood, which will serve as a guard over 10-15 years.