A sofa in the kitchen: a practical and comfortable furniture

Kitchen interior, suggesting the presence of the sofa is not a standard solution. This furniture is most often installed in the case, when there is the need for a separate isolation area for meals. In order to choose a sofa in the kitchen, you need to pay attention to factors such as the design dimensions, design, type of upholstery,. N. Correct selected furniture will streamline the space and give the kitchen a cozy atmosphere.

The main advantages and disadvantages of sofas Kitchen

Installing a soft design for the kitchen has many advantages and some disadvantages. Despite the fact that the sofa takes a lot of storage space, it enhances functional room options. Of course, in a small kitchen is not recommended to place this furniture. However, if the room size allows it to do, then it is recommended to explore the features of the data structures and parameters, which made their selection.

One of the advantages of the installation of the sofa in the kitchen is that such furniture can significantly increase the comfort of the room. As well as some models like furniture can be transformed into bed. This is quite a serious advantage, as it gives the opportunity to provide additional guest area for recreation.

Note!Another advantage of the soft sofas is their presentable design. According to the visual quality of this furniture is much superior to the usual places that are most often found in the interior of modern kitchens. Photo Sofa in the kitchen allow to verify this.

This furniture can be equipped with special boxes, which are used to store various utensils. There are some negative aspects of the use of sofas. The main disadvantage is the operational limit, which explains the impressive dimensions of the construction. For small rooms is better to choose a standard couch. Dimensions of kitchen sofa may be different, but in any case a fairly large amount of free space required for them.

Before purchasing such a structure, you must remember that the sofas are rather poor resistance to moisture. Temperature variations also act negatively on these designs. As a result of the impact of unfavorable factors reduced service life of the product. And finally, the last drawback is soiled upholstery. Therefore, the choice of material need be approached with the utmost seriousness.

kitchen sofa frame: making materials and tips on choosing

The frame of the sofa to be installed in the kitchen, must have a high strength. This property is a decisive element in the selection of furniture. The modern market offers several options for frames, other than for the manufacture of the material. Robust framework must possess the following qualities:

• resistance to temperature fluctuations;
• resistant to high levels of humidity;
• resistance to mechanical stress (shock).

Taking into account the above criteria, it is easy to choose a reliable construction that will last for years. Upholstered furniture in the kitchen usually has a frame made of natural wood. This material has many advantages. For example, it has good resistance to moisture, as in the manufacture of impregnated special structures. Wood turns stylish and elegant furniture that fits perfectly into the room, decorated in natural shades.

Wooden framework for the production of such tree species used most often, such as oak, beech or pine. Separately worth noting design made of birch. Such frames are different budgetary cost. Photo kitchens with sofas, made of wood, allow to appreciate the advantages of this material.

Another common material used in the production of support elements soft sofas, - chipboard. The main advantage of such furniture is its low cost. And buyers of furniture mark a wide range of colors and textures, which is considered the undisputed advantage.

However, the technical characteristics of structures of this material is much lower when compared to products made from natural wood. The service life of such furniture usually does not exceed 5 years. Photo kitchen of sofas made of particleboard can be easily found on the Internet at specialized sites.

Helpful information!The modern market of furniture for kitchen space allows you to pick up and more durable options sofas skeletons. Among them are aluminum structures that are resistant to moisture, as well as sufficiently reliable in operation. you can buy stainless steel products if desired.

Types sofas the kitchen depending on design

All the furniture of this type is classified according to structural features. Choosing a sofa configuration is carried out taking into account the peculiarities of a particular room and taste preferences of owners of the apartment. The most common one is the angular construction.

Corner sofa in the kitchen is considered to be a practical and rational solution that optimizes the useful kitchen area. The use of space in the corner of the room is appropriate in that case, when the kitchen is small. Minus angle options such furniture is that they do not have the ability to transform into a bed. However, they are equipped with drawers, which can be used to store small kitchen items.

Direct sofas in the kitchen look more presentable. However, quite a large amount of usable space required for them. Thus, for small kitchens, this option is not winning. Direct models are installed in large rooms. And often they function as additional space for relaxation.

In some cases, there are direct products and small kitchens. However, in this case it is necessary to remember that the capacity of this design is limited (in comparison with the angular embodiments). Small sofa for direct-type cuisine has no more than 3 seats.

There is another variety of sofas, depending on their design - modular. This type of furniture appeared relatively recently, but has already gained popularity among kitchen furniture buyers. The main distinguishing feature of such structures is that they include a number of modules that can be swapped if necessary.

This feature allows you to get the desired furniture configuration, depending on the situation. For example, such modules can be assembled a small sofa or two soft seats of chairs.

Sofa Kitchen: option for small-sized room

The use of space in the corner of the furniture for a small kitchen space is the optimal solution. This allows you to maximize the functionality of the room and save a maximum of space for the entrance area.

Currently, there is an opportunity to purchase various options angular sofas. When choosing a model, you need to pay attention to manufacturing companies, as well as the materials from which the structure is made. Photo kitchen corner sofas are recommended to study as an assessment of the feasibility of their installation.

Some modification of such furniture have special boxes that allow you to solve the problem of lack of shelves. There are products made in a minimalist style. Outwardly, they look like ordinary bench. The most popular option corner sofa in the kitchen a construction for 3 seats and having boxes located on each side.

Helpful information!Sometimes the kitchen provides presence oriel wall that has a niche. In this case, the most appropriate solution is to order an individual sofa, suitable for the geometric characteristics.

There are two types corner sofas. Articles belonging to the first class, have sharp corners. These sofas take up less space, but does not always correspond to the interior space. The second option - a model with rounded corners. They require more living space.

Direct sofas kitchen: the best solution for the middle area of ​​the kitchen

Straight models of sofas have many advantages. They are suitable for any versions of modern interiors and are of the highest presentable. These sofas can be used in any kitchen, regardless of their size. However, many experts do not recommend to buy such furniture, if the size of the room is too small.

Small kitchen straight sofas for small kitchens and more spacious premises not provide Only the maximum comfort during the meal, but also function as an extra bed place. Among the other advantages of direct models like furniture are:

• capacity;
• convenience;
• availability of boxes.

If desired, easy to change the position of the linear furniture and moving it. In addition to the advantages of direct constructions have also some negative aspects. Of course, the main negative feature of such furniture is its impracticality. Also, such structures are implemented independently, i.e. have no additional components (e.g., seats).

Small sofas in the kitchen: the benefits of choosing

Such furniture is popular among customers. This is due to the fact that modern kitchens have a fairly limited size. Because of this, often lack the opportunity to purchase large pieces of furniture.

The range of mini-sofas in the kitchen is very wide. furniture market offers a variety of color and design options for construction. This greatly increases their operational area. Experts recommend such models, even in the case where the size of the kitchen premises allow us to establish a three-dimensional furniture. The reason is quite simple. Large sofas are able to spoil the interior of the room, as to emphasize too much attention.

Note!The problem of a small number of seats can be solved with the help of additional furniture. For example, quite often together with small kitchen used sofas chairs.

Constructions of this type can be used for zoning of space in the kitchen. The unusual design of such furniture for the room allows you to intelligently allocate a dining area. Among the shortcomings of small sofas can highlight the fact that they often do not have a mechanism for folding.

Sofa bench Kitchen: simple and reliable option

This type of sofa is the most simple and concise. Products are used in the case where it is necessary to arrange a dining area in the kitchen, made in rustic style. Such furniture is of two types - hard and soft. In the first case, the lack of upholstery observed. Made hard benches made of natural wood.

Soft options benches to the kitchen, as a rule, are not equipped with drawers, which reduces their functionality. In this case the emphasis is on the maximum construction simplicity. Such furniture usually has no armrests.

Various materials are used to make sofa bench frame. Wood products are cheaper than metal, but do not have high strength. Photo Kitchen interior with sofas of this type allow us to estimate their benefits as well as contribute to the selection of the required model.

Related article:

Kitchen facilities: comfortable and functional furniture for the kitchen

Equipment: tables, chairs and stools. Types of corners. Models with drawers. Kitchen corners for small kitchens.

On sale there are products that provide the availability of boxes. Their cost is higher than the price of standard benches, but also the corresponding functionality. such a decision is the best for small kitchens.

Folding sofa in the kitchen: the variety of designs

Rollaway kitchen furniture can solve several problems at once. In addition to the direct appointment, it gives an opportunity to get an extra bed, which is a major plus. Sofas that are transformed into bed, may be straight or angled. The first option is considered more versatile. This design can be placed along a wall or highlight it with the help of a separate zone.

If the kitchen has a limited amount of free space, then it is recommended to carefully consider the location of the sofa beds. Kitchen area, which has a limited area, requires a careful approach. For this room, you can choose a sofa that has no corner blocks.

The modern market offers a variety of modifications transforming structures. If desired, you can buy a narrow couch for the kitchen with sleeping. Among other things, you can buy a sofa-bench.

When you select either option is very important to pay attention to the quality of the component parts that make up the mechanism of transformation. It affects not only the convenience of folding, but the shelf life of the furniture.

Note!Sofa bed for kitchen suitable for people who often receive guests.

When you select a specific model should focus on the interior of the kitchen facilities, as well as the cost of the furniture. It is not recommended to buy the cheapest options of sofas, as they are often not of good quality, it has an effect on their service life.

Kitchen sofa sleeper: Design Features

As already mentioned above, such models of sofas are used to enhance the functionality of the kitchen. To select a suitable design for a particular room, you must first determine the dimensions of the sofa. At the size selection is influenced by many factors. The main ones are the parameters most kitchens.

If the size of kitchens do not allow us to establish the structure of this type, then you can place an order products according to individual sizes. Many firms engaged in manufacturing unique furniture. Kitchen sofa sleeper should have a fairly wide seat. This is necessary in order to achieve maximum comfort during use. Optimum seat sizes vary in the range of 50 to 60 cm.

Concerning the length, it must be not less than 170 cm (unfolded). This is very important, as models with smaller distance are uncomfortable to sleep. In turn, the width of the couch after transformation should be at least 80 cm.

Kitchen sofas with sleeping corner type may have a different length sides. Each such structure comprises two wings: small and large. In the first case the maximum length is 160, and the second - 220 cm. If we expand the model of this type, it turns out bed that can accommodate two people.

Kitchen with sofa: how to choose the right location for the soft design

Location on the sofa in the room is influenced by several factors. They need to be explored. The first placement of this piece of furniture depends on the geometry of the kitchen and its size. The following factors are taken into account for determining the position of the sofa:

• the geometry of the room;
• number of window and door openings;
• operational purpose furniture;
• staffing the kitchen units;
• private owners preferences.

Direct Kitchen sofas Kitchen experts advise to place so that they do not overload the visual space of the room. To do this, the product can be placed along the wall opposite the kitchen, or under a window.

Helpful information!Sets of furniture for kitchen facilities can be equipped in various designs. If it includes the island worktop, the sofa is recommended to install the opposite side.

Photo sofas kitchen allow us to estimate the benefits of the different places of furniture arrangement. If the cooking space has a large amount of space, the similar structure can be set independently (without table). Such an arrangement makes it possible to arrange a separate area, which will be used for recreation. In particular, this solution is suitable in the case, if the kitchen has a TV.

A sofa in the kitchen: the types of upholstery and advice of her choice

Materials used as upholstery, must have high wear resistance. The kitchen there are frequent variations in temperature and air humidity ratio is higher than in other areas. Covering need not be fine, since it increases the likelihood of mechanical damage. In addition, you must choose the least easily soiled material.

Standard design or custom-made kitchen sofas often have trim, which is made of artificial leather. Of course, the natural material of a higher quality, but the cost is much higher. Skin is an attractive appearance. Another advantage of such a material is considered to be its practicality. A wide range of colors allows everyone to find a suitable version of the upholstery.

Leather upholstery does not absorb odors, which is also a plus. Maintenance is very simple for such material. All that is needed - to wipe the stuff from time to time with a wet cloth or sponge. More information about the advantages of this material will help the corresponding photo. Sofas to the kitchen, equipped with leather upholstery - the optimum solution for a stylish room. Padding on cotton basis is not recommended for such purposes. The same goes for linseed material.

The visual design of the sofa is chosen depending on what style decorated interior kitchen facilities. If desired, you can buy furniture that will stand out from the common range of hues. Such designs allow the correct accents in the room and make room design more unique.

How to choose the style of the sofa in the kitchen: photos of various models

Today the market is replete with a variety of kitchen furniture designs, which differ from one another not only in the manufacture of the material, but also in design. The choice of furniture style is dependent primarily on the stylistic direction in which decorated the room itself. The most popular option is now the classic furniture.

Regardless of size, folding sofas and kitchen conventional design, made in classic style, characterized by a presentable and elegant. A special feature of these models is the presence of the texture of wood on the frame. Most of these sofas also have a thread.

Helpful information!For classical furniture most appropriate white and natural colors, allowing to create comfort in the room.

In second place on the popularity of modern pieces of furniture are among the buyers. Sofas in high-tech style is minimalist and suitable for small spaces. Small sofas for the kitchen of this type are compact and versatile. If desired, you can purchase direct or modification of the angular furniture. Textiles in this case is monotonous and often executed in bright colors.

There are a variety of sofas manufactured in other styles. In the market you can find modifications made in loft-style Scandinavian furniture or products, decorated in different ethnic motives.

How to choose furniture for small rooms: a kitchen corner sofas and folding models

Many people do not realize that in a small kitchen can be set upholstered furniture. Small sofa is easy to blend in with the interior of the premises, regardless of its size. However, this should pay attention to some important nuances.

The best choice for a room that has a limitation on the area, are the angular model. Straight small sofas in the kitchen look more presentable, but it requires more space for them. In turn, for a narrow space is best suited precisely direct model.

The ideal location for this small couch considered area under the window opening. In this case, there is a possibility of the organic integration of additional furniture (eg chairs). The dining area at the window will be well lighted. This will give it ease and will not allow to overload the interior of the room.

Kitchen sofas for small kitchens must be as concise. Furniture, with no armrests and pillows, looks more compact.

Design, equipped with drawers, can improve the functionality of the kitchen facilities. When choosing a shade of furniture is recommended to focus on the main color of the room. Accent furniture in this case is not an optimal solution, as visually narrows the space of the room.

The main types of small kitchen sofas

Options for small sofas are traditionally used in kitchens that do not have enough free space reserve. As well as these models become in order to save. Currently, you can select the following types of furniture like:

• angle;
• sofas, couches,
• semi-circular;
• Modular.

Mini-sofa for corner type kitchen is a common solution that has many advantages. Supplemented by a piece of furniture is a table and chairs. If desired, you can purchase a model that implements, along with cushioned ottoman.

Corner modification contain fairly large boxes, which are recommended to be used for storage of linen (if a folding sofa). Traditional designs of such dimensions ranging from centimeters to 110h200 175h200 cm. Another point to which attention should be paid, - the shape of the back.

Note!Corner modification bought for small-sized spaces may be straight back, which is attached to the wall.

Rather popular choice of furniture is a sofa couch. The main advantage of such species is the high functionality of the product. Kitchen sleeping couch this type is characterized by comfort and practicality. Of the minuses couches can be noted that they are not equipped with drawers.

Semicircular option takes up more space than the other modifications. However, these products are of presentable appearance. Semicircular structure can decorate any interior. Experts recommend to be careful when choosing the upholstery for such models, as it should be as resistant to wear.

Practicality and versatility of the modular technology is time-tested. Such furniture implies the possibility of changing the layout, therefore, is very popular on the market today. With a modular design can achieve the necessary level of comfort during food intake, and also provide an extra bed.

A mechanism for folding a small couch for the kitchen

Sofas for the kitchen facilities can be equipped with different mechanisms that enable them to transform into a bed. From the type of mechanism it does not depend only the usability of furniture, but also its service life. It is therefore necessary to explore options for construction equipment. The greatest demand is for such mechanisms:

• "dolphin";
• "French clamshell".

Kitchen sofa with a sleeping position, equipped with the first type of mechanism is the most popular. In this case, the article consists of two parts. The first of these is the seat of the sofa, and the other is located underneath and pushed if necessary. This embodiment allows to obtain full sleeper, which differs large size and comfort. Photo kitchen design with sofas, transforming according to this principle, provide an opportunity to assess their merits.

Devices operating on the French clamshell type, less common, but is also found on the market of kitchen furniture. In this case, the mechanism is in the frame structure. Such sofas have three sections, which are moved out of the inside of the article. If we expand like a piece of furniture by pulling the strap section, which is located at the top, then this design is transformed into a bed. Support couchette are metal legs.

To select the appropriate sofa bed in the kitchen, you need to study a photo of such furniture. Models that are transformed by the second type of mechanism, have the advantage - easy application. To use such a berth available daily. And it is worth noting that such furniture often includes in its construction niches that are used to store various utensils. This option is suitable for small kitchens.

Note!Using the "French clamshell" mechanism has some disadvantages. The main one is the discomfort that is caused by the need to hide the removable soft elements (armrests and pillows).

Today the market of furniture you can find another kind of folding mechanism, which is called "evroknizhka". This type of design is most often acquired in the case if the kitchen has a fairly large size. This is due to the fact that these sofas are vast. In addition, there are other options for folding devices, but they are less popular and are often not a practical solution for a standard kitchen facilities.

Kitchen sofa with a box for storing small utensils

Furniture elements, with special niches for storage of different accessories are practical and functional solution for small and medium-sized rooms. Moreover, these boxes can be placed in different parts of the sofa. All niches are divided into two types: sliding and fixed. In the first case the niches are placed on the sides or on the front of the sofa.

Drawers are equipped with not only the direct product, but also the angular sofas. The kitchen, which is such furniture, less prone to littering. Before purchasing these products it is necessary to pay attention to their other virtues. For example, sofas with niches for storage can reduce the number of shelves. Boxes located inside the structure, do not spoil the appearance of the room.

Modern Furniture offers customers a wide range of sofas, equipped with drawers, which differ not only for its design but also design. you can choose a model for the premises of any shape and size as desired.

Kitchen design with sofas is determined primarily based on the personal preferences of the hosts. Smaller models with drawers are also often have an option, which implies the transformation of the product in a separate bed. The apartments are studios, where the kitchen combined with living room, this furniture can perform a separation or restrictive function.

Types of sofas with drawers and their main characteristics

Currently on the market of kitchen furniture you can find several varieties of sofas, equipped with special niches for storage. Before you buy a particular model, it is recommended to get acquainted with the characteristics of the options. Also, experts advise to study photos of sofas in the kitchen. The interior of the premises, such designs do not always look appropriate.

Niches for storage are found not only in straight and angled models of this furniture. They can be found in modular designs, which are often used in studio apartments. The function of such products is to divide a single space of the room into zones.

Note!Proper segmentation of the area is a very important moment for the organization of the studio apartments.

As mentioned above, the main advantage of modular design is the ability to change their configuration. Some models of this type are transformed into individual seating. From one-piece design (kitchen corner and sofa-direct products) distinguishes them also design, which, as a rule, is more modern.

Drawers are equipped with sofas, and which are used for large bay walls. Often, this furniture has a unique shape, repeating the geometry of the recess in the wall. On small kitchens use of such models it is not considered a viable solution, so they are not so common.

Additional functionality of upholstered furniture for the kitchen

When choosing a couch to the kitchen facilities in the first place it is necessary to focus on its functionality. Therefore it is recommended to get acquainted with auxiliary options that can have such furniture. Most modern sofas equipped with special boxes, which are used for storage of small kitchen items. Sometimes the boxes dimensions allow to equip the sofa in place for the storage of preservation, which is a very convenient solution.

Small sofa beds in the kitchen and the whole modification can be equipped with a small shelf. They are fixed or sliding, depending on the particular design. More expensive models include sofas into their design mini-bars, which are used to store a variety of alcoholic beverages.

One of the most useful options like furniture - the possibility of transformation into bed. When you select a folding model should focus on the quality of the mechanism. From this figure depends on the operational life of the product. Kitchen drawers and sofas with folding design, transforming into a bed, the greatest demand among buyers. This solution provides maximum portability and economy of useful floor space.

Thus, additional functions are very useful. The choice of options depends on the operating conditions, as well as the preferences of the owners themselves.

Sofa for kitchen facilities - this is a non-traditional version of the decoration dining area. This solution has many advantages, which are comfortable, stylish appearance, as well as the organization of an extra bed. When selecting this piece of furniture should focus on the dimensions of the room, his style, and also do not forget about the fact that such structures must be durable and functional.