How to glue vinyl wallpaper with paper backing: Tips for finishing

Gluing vinyl wallpaper can be done with their own hands

Features vinyl wallpaper

Vinyl - a PVC layer applied to the paper or non-woven backing. Its main advantage lies primarily in long service life. In addition, vinyl does not tarnish under direct sunlight, which is very important for wallpaper with bright pattern, tolerates high humidity that allows the use of such a coating in the bathroom or on the kitchen.

The only thing that could have a negative impact on the vinyl cover - a temperature swings. So do not stick it in close proximity to strong sources of heat, such as near a fire or on a gas stove.

In addition, the material has poor breathability. The problem can be solved by purchasing special wallpaper with micropores. This option is well breathable, but successfully resists the accumulation of moisture, so you can not be afraid that through the pores under the wallpaper will penetrate water.

Vinyl sufficiently durable and wear resistant

There is a common myth that vinyl flooring is dangerous to human health. He appeared out of nowhere, but the drawback possess only certain types of vinyl wallpaper with paper backing. Reviews of poor quality products from unknown manufacturers will really unflattering. If we take wallpapers for walls a reliable manufacturer, the production of which comply with all applicable environmental and health safety, they are absolutely harmless to your health.

following the positive qualities of the vinyl coating is to provide:

1. It can be glued on various types of surfaces (concrete, plaster, wood, particle board and so on.).
2. Due to the density of the vinyl layer, such wallpaper good disguise cracks and irregularities of the walls. However, this thick coating varieties must be used.
3. A wide variety of design options, which facilitates the selection of the coating for a specific interior.
4. Choice of standard or meter rolls of wallpaper. How to glue both of them will be discussed below.

Vinyl wallpaper can be glued on any type of base

Advantages and disadvantages of vinyl wallpaper with paper backing and Non-woven

The basis of vinyl wallpaper can be paper or interlining. Each of these materials has its own characteristics, advantages and disadvantages that must be considered before gluing. Non-woven wallpaper has the following advantages:

• glue is applied directly to the wall, they do not need to infiltrate the wallpaper, which greatly simplifies the gluing process and makes it faster;
• non-woven backing is stronger than the paper, respectively, the finished product will also vary greater strength and durability;
• Unlike vinyl wallpaper with paper backing, non-woven sticky will effectively hide surface irregularities and cracks in the walls.

Disadvantages of non-woven base:

• Nonwoven nonplastic so wallpapered with a base is difficult to sufficiently pasted circularity projections and relief surfaces;
• non-woven base sufficiently transparent, so any spots on the walls or remnants of previous coatings are translucent.

The advantage of wallpaper on non-woven backing that the canvas is not necessary to apply the adhesive, but only on the wall

The advantages of wallpaper on a paper basis:

• paper stretches well, and this means that wallpaper with a base can be easily pasted protrusions, recesses, columns, corners, etc .;
• the paper has a high density, through it will not show through the base surface.

Cons paper base:

• Glue should be applied not only on the wall, but also on the wallpaper;
• paper quickly absorbs the liquid, which increases the flow of adhesive and requires a high speed;
• paper wallpaper easy to break or scratch;
• adhesion of paper to the wall surface long enough, so the strip of wallpaper you need some time to press against the wall.

When gluing fabrics to paper substrate - adhesive is applied on the wallpaper, and on the wall

Given the characteristics of the materials, you can easily learn how to quickly and properly gluing vinyl wallpaper both on paper and on a paper basis.

Useful advice! Correct gluing paper wall (as non-woven) - is not as difficult as it might seem at first glance. The main rule - prepare carefully the wall from it will depend directly on the end result.

Types of vinyl wallpaper

Classify wallcovering can type surface structures (embossed or smooth) and method of its finish (embossed or profiled). Also, many properties depend on how the wallpaper is applied to the upper decorative layer:

• silk-screen printing - the easiest type of vinyl coating. The top layer consists of a thin polyvinyl chloride, on which is applied a variety of textures. This type has a wide variety of design options and the similarity in appearance with a silk cloth;

Vinyl wallpaper with silk-screen printing is ideal for the decoration of the living room

• CD-vinyl - heavier coating embodiment, the upper layer of which mimics different materials (cloth, stone, brick, Plaster, wood and many others);
• Heavy vinyl - the thickest version of the cover, which is characterized by the greatest relief surface. It can be styled under the skin, volume embroidery and other materials. Due to the density of the vinyl layer, a high strength, and it becomes possible to hide cracks and roughness of the walls;
• chemical embossed wallpaper - differ from other types of smooth glossy surface, which can be easily remove impurities. Among the advantages of this type can distinguish a high resistance to moisture, detergents and exposed to direct sunlight. Another name for such wallpaper - washable.

Separate type of wall coverings - wallpaper for painting. You can pokleit vinyl wallpaper with paper backing (both on the walls and on the ceiling) and painted in any desired color. The main advantage of this cover - the possibility of multiple repainting.

Choosing the appropriate type of wallpaper is dependent on the characteristics of the walls, their quality and purpose desired style room interior.

Background of heavy vinyl differ in thickness and embossed surface

How to glue vinyl wallpaper with paper backing Adhesive selection

Properly selected adhesive vinyl wallpaper with paper backing - the key to successful gluing surface. Low-quality makeup can lead to the formation of bubbles and irregularities backlog of wallpaper from the wall. Experts advise to give preference to products of foreign manufacturers, which, although more expensive than domestic, of a higher quality. Feature gluing the case with vinyl covering is that the material itself is quite heavy, so the adhesive composition should be well and quickly set.

Related article:

Vinyl wallpaper on non-woven basis. How to glue right? Feature Wallpaper and their positive qualities. As a self-pokleit decorative painting. pasting steps process video.

Good adhesive vinyl wallpaper - is one that captures the painting on the wall quickly, but not immediately to be able to fit on the joints of the strip, align vertically and horizontally. In addition, the adhesive must prevent the development of mold and mildew under the wallpaper. This is very important in the case of vinyl, because it is poorly breathable, and the appearance of microorganisms under coating layer, unfortunately, not uncommon, particularly at elevated humidity.

Useful advice!Consumption of each specific type of adhesive is indicated in the instructions or on the packaging. It is a mistake to assume that the more glue - the better. Conversely, any excess can leak through the seams and soil the surface of the web.

It is very important to choose the adhesive appropriate for the particular type of wallpaper

It is also undesirable to use for gluing coating versatile vinyl wallpaper paste. There are specialized formulations, each of which is suitable for a certain environment. As these conditions can be a type of surface on which are glued wallpaper, type of vinyl coating, humidity, and more. Therefore, if you are not sure what kind of adhesive composition is best suited for gluing, for example, foamed vinyl wallpaper with paper backing on a concrete wall, it is best to consult with an experienced specialist.

It is important that the adhesive had the following characteristics:

• during mixing should not form clumps and lumps. They can then lead to uneven surfaces pasted;
• It must have anti-fungal properties to prevent the occurrence and development of mold;
• It has made good glue can be stored for days without zasyhaya while;
• in the package composition can be stored for several years;
• It must be environmentally friendly and safe for human life and health;
• the process of preparation of the composition should be as simple and understandable even for those who have no experience in such work.

Some adhesives are light blue or pink shade that disappears after drying

Necessary tools to work

Numerous themed video "how to glue the paper wall" exhibit a number of tools that may be needed during the execution of the work:

• level or plumb line to mark the line gluing on the walls, as well as a pencil or marker for drawing;
• brush for applying adhesive to the wall. Also you can use the roller with medium or short nap;
• large rubber roller - to smooth the already pasted canvas on a wall;
• knife or scissors for cutting the rolls and cut holes for sockets and switches;
• ruler or tape measure;
• foam rubber or soft tissue - to remove excess glue in the joints;
• table or ladder.

Tools necessary for self-Wallpapering

Wallpaper glue in the corners of the room (both external and internal) - is quite difficult, so the process is best done together, it will be faster and more efficient. Partner can hold the ladder, to fetch tools or cut a new canvas at a time as you paste the previous one.

How to remove old wallpaper off the wall

There are a few tricks on how you can quickly and effortlessly remove old paint from a wall. To do this you will need a narrow and a wide spatula, a special liquid to remove the cover, a tool for perforating the web and conventional polyethylene film.

First, should be applied to old wallpaper softening solution or water with added detergent. In this state, the coating is left on for 15-20 minutes. Plastic film is needed in order to cover the furniture and close sockets and switches. After a soak wallpaper, they can be easily removed from the wall with a spatula.

In the case of gluing used extra strong adhesive composition, and soak the old cloth it does not work, you can use sandpaper. It takes more time, but it will completely remove the old paint from the wall.

Removing from the wall of the old coating with a spatula

How to glue vinyl wallpaper with paper-based: the alignment of the walls

In order to cover the walls with glued on them look as attractive as possible, they should be leveled. This is especially true for owners of old apartments, the walls of which do not differ a great surface. alignment method is selected depending on the vertical deflection. This parameter is verified by using the level and column, and in that if a deviation of only 5.10 mm, the surface is just enough to treat filler.

Leveling with putty

The starting layer of putty is advisable to apply two layers between which can be laid special masking grid. This prevents occurrence of microcracks on the surface. The direction of the layers in this case can be perpendicular to each other, so you will level the surface in all directions.

In operation, is taken into account that the angle of inclination of the spatula defines a layer thickness smaller than the first, the second column.

Leveling with putty suitable for walls that have minor errors

The finishing layer is also applied in one or two steps, then finally aligned using fine grain emery paper. Under wallpapering, this layer can not be applied, however, it is required if you plan to paint.

Leveling plaster

Time-consuming and complex plaster work should apply in the case where the wall is so rough that it is visible to the naked eye. For this purpose it is best to use a special plaster mixture based on cement, which contain polymeric additive. The presence of the latter makes it possible not to use a polymer network, since the composition obtained is very strong. The following types of plaster can be used in residential areas with normal humidity:

• lime-plaster;
• lime-clay;
• lime-glinogipsovaya;
• cement-lime.

For preparation of uneven wall plaster is applied

Before attempting to equalize the surface with plaster, you must thoroughly clean it from dirt and dust, primed. After that, at the edges of the wall mounted two vertical lighthouse, which is mounted between the intermediate. Self alignment is performed in three steps:

1. Obryzg - applying liquid plaster layer about 3-5 mm. The surface should be pre-wetted for better adhesion. This layer is a transition between the main mass of the plaster and the wall to which it is applied.
2. Primer - the first layer is applied to the second, which must be approximately twice as thick. Its thickness may be 5-7 mm.
3. Nakryvki - finishing thin plaster layer, whereby the smoothed ground irregularities.

alignment of plasterboard

For very uneven walls, you can use sheets of drywall, which not only aligns the wall, but also increases the level of heat and sound insulation in the room.
If the surface roughness of not greater than 7 cm, the sheets can be attached to it using a special gypsum composition. If the curvature is greater, you will have to install a special frame to which the plasterboard is fixed in the future. Fastening sheets should be implemented by means of screws in increments of 30 cm. The joints between the sheets are sealed plaster solution, it is smeared and cap screws.

Alignment of walls with water-resistant drywall

At the end of a plaster surface should be putty, and then to move on to the question of how to glue vinyl wallpaper with paper backing. It is necessary or not to smear the walls of the FCL glue? - frequent question, an unequivocal answer to that - yes, we should. Wallpapering on gypsum board takes place on the same technology, current, and other substrates.

How to pokleit wallpaper video and step by step instructions

After you have determined the type of coating and for this adhesive composition, it is possible to start directly glueing. This is done in the following sequence:

• prepared wall. This process involves a preliminary drying surface. If the wall had recently been plastered, the plaster has to dry completely. Otherwise, a high risk of peeling wallpaper;

Useful advice! In order to check the dryness of the walls, it is possible to stick a small strip of polyethylene and leave it overnight. If in the morning there appeared wet drops, then the wall has to be dried.

Pasting of walls it is necessary to start from the corner of the room or window openings

• edges that remain top and bottom are cut using a blade or knife stationery. This is best done when the sheet is already dry up, otherwise the risk of getting cut uneven.

How to stick vinyl wallpaper with paper backing in the corners and on the ceiling of the room? For these processes, there are subtleties that will be discussed later.

Nuances wallpapering the ceiling

The process of wallpapering the ceiling is carried out before the walls are plastered.
For finishing the ceiling is better to choose a lighter version of the vinyl as heavy wallpaper can break under its own weight. The rest of the difference with the pasting walls is minimal, but the process is more time-consuming, and it is in the case of the ceiling is very useful to help his partner.

When pasting the ceiling of the room is recommended to remove all the furniture and carpeting. The remaining objects covered with plastic wrap. To protect your face and head from the glue, use a special hat and sunglasses.

How to hang wallpaper in the corners of the room

At what angle to begin to hang wallpaper - it does not matter, but it should be borne in mind that this process requires special care. The task becomes easier if the corners of the apartment flat. If they are errors, they definitely need to fix it, otherwise the end result will be unsatisfactory.

Vinyl wallpaper pasting external corner of the room

When gluing vinyl fabric in the corners, it is necessary to cut through one of their joints. This means that when the corner is less than one strip, it is necessary to measure the distance to it (from the pasted surface) and cut off the web with an allowance of 3-4 cm. These centimeters will go on a perpendicular wall. Then you need to stick the second web overlapping, and at this point neatly cut through the two webs. This way you get a smooth and tidy seam. In the joint between the wall is greased with glue and wallpaper smoothed with a roller.

How dry vinyl wallpaper with paper backing

The answer to the question of how much will dry new wallpapers, depends on many factors. First of all it affects how well was allowed to dry work surface before gluing. Optimum performance environment during drying and further glueing - temperature not lower than 19-21 ° C and humidity not more than 75%. At high humidity or low temperature of the wall can dry out very long, which, in turn, may affect the peeling wallpaper, their deformation and divergence in the joints.

Remember that to carry out other types of repair work is possible only after completely dry wallpaper.

Drying time depends on the amount of wallpaper adhesive spread

Also at the time of drying wallpaper may affect the availability of drafts or air flows from HVAC equipment. Drafts when glueing lead to the fact that the coating dries unevenly, and this leads to deformation. If you do not want to glue the canvas a few times, then do not use in the process of papering the room air conditioners, fans and other HVAC equipment, as well as close all windows and doors.

Exact drying time fabric is difficult to determine, because it depends on the following factors:

• the type of glue used in the process;
• the amount of deposition on the wall of the solution;
• Room temperature and humidity level.

The minimum drying time of the web on a paper basis is daily. In the base paper, this time a bit less. Time also depends on the density of the vinyl coating and the presence therein of micropores.

It is necessary to carefully remove glue residue on the joints in order to avoid contamination of paintings

General tips when gluing vinyl wallpaper

There are some general points that must be considered when gluing vinyl wallpaper:

• vinyl a good conductor of electricity, so you need to stand wallpaper so that they do not touch the exposed wiring, otherwise you run the risk of injury;
• during drying fabric having a paper substrate, it is compressed. Therefore, we must pay special attention to the joints and seams. That they did not disperse, wallpaper glue is recommended to overlap. Tell us how to properly glue vinyl wallpaper with paper-based video and photo instructions that can be easily found on the Internet;
• if you do not want the atmosphere in the bedroom or children's room has changed, it is not necessary to paste over the walls of these rooms vinyl. All the matter in its very low water vapor permeability;

Vinyl wallpaper has a low water vapor permeability, it is not recommended to glue them to the children's room and bedroom

• do not need to save on the quality of the coating and adhesive, it depends on them longevity, durability and attractive appearance of the wallpaper;
• for stick paintings in rooms with high humidity wallpaper PVC fit could not be better, as they protect the walls from moisture.

Do not be afraid to experiment, try pasting the walls of different wallpapers. Photos combination wallpaper look very attractive, most importantly choose the right pattern, color and texture. Use rolls of different thickness and type, use the original design solutions that combine colors and textures, and you will be able to create a stylish and memorable interior.