Greenhouse cucumbers for their own hands: photos of the best solutions for the suburban area

Greenhouse cucumber cultivation in our region is quite common, because thanks to this method, you can enjoy your own vegetables is already in the early spring. But how to create a suitable climate for them? Consider how to make a greenhouse for cucumbers own hands: photo examples, diagrams, and some variants of ready designs that can be purchased.

Is it better to make a greenhouse for cucumbers with their own hands or buy ready-made

Today, you can buy ready-made greenhouse for cucumbers without difficulty, which is enough to install on the site and start using. However, many owners prefer homemade designs. Consider what are the advantages of an option, and that is actually better.

Among the advantages of ready-made greenhouses may be noted that the design is completely ready for use, which saves you from all the hassle associated with construction of its: settlements, acquisition materials and workmanship. However, this solution has a number of drawbacks associated with some limitations in the size and shape of the greenhouse.

If you want to buy a greenhouse for cucumbers, it will be faced with the phenomenon of the standard sizes that are not always suitable for a particular site. Moreover, the impact on their shape and there is no way. The disadvantages also can be attributed to their considerable cost.

If, however, engaged in manufacturing alone, it can be installed perfectly suitable design of the size and shape you need. Such a greenhouse at any time can be dismantled and reassembled, if the need arises.

We should not forget about the difficulties to be faced in the process. In order to design a robust and reliable, it is necessary precisely to make calculations and to follow them in the process of erection. Despite the fact that the cost of home-made greenhouse will be less than that of the finished structures, taking into account the time spent and effort costs may be substantially the same.

Useful advice!Before you buy all the necessary materials for work, it is necessary to carry out the most accurate calculations. Otherwise you risk to face a waste and a lack or excess materials.

How to make a greenhouse out of arcs: the choice of the most suitable material

The quality of the selected arcs will depend on the strength and reliability of the greenhouse, so you should pay attention to this issue. Before you give preference to one or another variant, it is recommended to consider the advantages and disadvantages of each. There are four materials that are suitable for this purpose, steel, metal and plastic, plastic and aluminum.

It is worth paying attention to the difference in the price of these materials because their cost is significantly different. The most expensive - aluminum arc, and also with them is quite difficult to work with. It is necessary to choose the products of sufficient strength and thickness, as well as the same size. The advantages of using aluminum tubes include:

• high durability and long service period;
• low weight;
• material resistance to corrosive processes;
• ease of facing covering materials.

However, these costs and efforts are justified. The result is a durable, lightweight design that is easy to install both on a prepared foundation, or simply in the ground.

It is much easier to work if you give preference to the metal arches for the greenhouse in PVC coil. Preserving characteristics such as light weight and high strength, the purchase will cost you much cheaper. In addition, please read the instructions on how to assemble the greenhouse of the arcs and the film can be made assemblage constructions quickly and easily on their own.

Useful advice!Deciding acquire plastic pipes for the greenhouse, it is better to give preference to the products of larger diameter, because they have high strength and resistance to corrosion.

The easiest, cheapest and most popular option because of the arc to remain plastic greenhouse. Easy to work with them, and the low price and long service life are superior to all other materials. The only thing worth considering - it is better to buy a plastic arch greenhouse for larger diameter and density. This will save time and effort, and the strength of the finished structure will be higher.

Greenhouse cucumbers for their own hands: Photo of different options and models

Homemade greenhouses for cucumbers may differ from each other by a huge number of characteristics, starting with what materials were used for its construction to the size or form. Of course, you can develop your own pattern, which will be most suitable for the proposed conditions, however, this requires a lot of effort, and serious risks of errors nobody is excluded.

Consider some of the most popular options for greenhouses Cucumbers with their hands, their advantages, especially construction and operation.

How to make a greenhouse for cucumbers by a film

The easiest way to make their own greenhouse - to use for this purpose foil and metal railings. Although such a structure will not differ too much strength, it is very convenient, since it is easily dismantled and repaired if necessary. With the help of improvised materials, polyethylene, which are covered by the arc is fixed, which allows greenhouses to maintain integrity.

In order to equip the space for growing cucumbers, and figure out how to cover the hotbed of film arc, you must adhere to the following algorithm of actions:

• choose a suitable place that gets enough sunlight. It is desirable that the greenhouse was ground under a slightly elevated to avoid accumulation and stagnation of water in case of rain;

• mark territory, oriented the greenhouse from east to west. The maximum size of greenhouse cucumbers for this design - 2 m in width and 3-4 m in length;

Related article:

Greenhouse from profile pipe with his own hands: photo prefabricated
Greenhouse from profile pipe with his own hands: photo and description of the stages of work. How to choose a place and covering material for construction.

• Using wooden planks, make a small frame (about 20 cm) around the beds of the future;
• following the step about 50-60 cm along the entire length of the board, do the holes that will be used to secure the edges;

Useful advice!As arcs may suit any flexible metallic elements, including wire.

• using a metal wire, connect between an arc at the high points. This will give additional rigidity to the frame;
• film, which you plan to cover the greenhouse, the thickness should be at least 120-200 mm, otherwise it will be too often torn;
• with one of the long sides of the greenhouse film must be rigidly fixed, and on the other sufficiently flatten it somewhat heavy (bricks, stones, boards);
• short edge of the film, you can either fix, using the same materials at hand, or pull, and secure with pegs, as it is done during the installation of the tent.

As well as the installation, operation process is so simple for greenhouse cucumbers with his hands, does not present any difficulties for the owners. All you need to do - to turn on one of the edges of the film, to air, to water and care for plants.

How to make a greenhouse for cucumbers own hands: Butterfly design

Greenhouse Butterfly enjoys popularity among truckers, thanks to its simple and user-friendly design, which allows efficient use of all available space, while still having treatment for all garden beds. Such structures are more stable and durable than the previous embodiment, and the level of protection that they provide cucumbers, considerably higher.

"Butterfly" is able to withstand pretty severe weather. This applies to heavy rains, hail and even snow, the level of which does not exceed 10 cm. But in hot weather, the greenhouse is very convenient, as well-ventilated.

Externally, this design reminds a house with a gable roof, Each part of which can be opened. This system enables the owner to get access to any part of the greenhouse or just airing. Quite often you can find greenhouses, butterflies for sale, but you can also build their own.

If buy ready greenhouse this structure, it is made of metal and polycarbonate (sometimes glass). But for independent work is more suitable wooden frame and polyethylene or glass.

Note!One of the most difficult components greenhouse butterfly - locking mechanism. Therefore, you must carefully consider and plan for all phases of work.

Step by step look at how to make a greenhouse for "Butterfly" cucumbers:

• carefully clear a plot allocated for the construction of the grass and foreign objects;
• to create a frame using high-quality boards (best fit of coniferous trees);

• establish a greenhouse, you can directly on the ground, but it would be better to prepare the base of the timber for it to continue to avoid rotting foundation. For that remove the top layer of soil and make drainage layer approximately 10-15 cm from the fine gravel;
• prepared in the frame, insert the glass (allowed normal window) and firmly secure them;
• fasten all the structural elements.

In order to protect the wood and prevent rotting processes required to treat all wooden elements with a special compound. This will prolong the service life of your greenhouse.

Greenhouse cucumbers for polycarbonate own hands: Material Features

Not so long ago, a new type of greenhouses which are made using a material such as polycarbonate. This synthetic material is widely used in agriculture, and is often used for a variety of purposes, including to build greenhouses.

The advantages of this material include light weight, and resistance to mechanical stress. polycarbonate transparency is about 80-85%, which allows plants to obtain the necessary amount of sunlight. At the same time it is resistant to precipitation and cools slowly, longer keeping heat inside the greenhouse.

Buy Greenhouse cucumbers for polycarbonate will not be difficult, however, because working with this material is quite simple, many people prefer to do everything with their own hands. In order that the result does not disappoint, it is necessary to follow some recommendations for working with this material:

• the thickness of the sheets used for the construction of greenhouses, should be less than 4 mm and not more than 6 mm;
• because the plants require not only sunlight but also fresh air, thoroughly think through the ventilation system and the way will be watering;

• to adjust to the desired size polycarbonate sharp knife fit perfectly, but it is important not to damage the surface in the process, so you leave the scratch is very simple;
• in order to avoid unnecessary costs of material, carefully calculate everything in advance and try to act in accordance with these calculations.

It requires special attention and care of the greenhouse polycarbonate. It is not recommended to use cleaning agents to clean it. This has a negative impact on its appearance: it is turbid and loses its appeal. To remove dirt, enough to wipe with a damp cloth.

Greenhouse cucumbers for polycarbonate: step by step instructions for building

In order to produce a greenhouse for cucumbers, you'll need the following materials:

• wood or metal frame profile for a greenhouse;
• polycarbonate sheets;
• foil or roofing felt;
• screws and screwdriver.

What is the amount of materials you will need to be calculated individually, because it depends on the size of the structure.

Note!protectant coating is required not only for the wooden elements of the greenhouse, but also for the metal. Processing of metal parts is required in order to avoid corrosion.

Preparing to install a greenhouse to start with the foundation. For this it is necessary to dig a trench whose depth is 0.5 m, and the width of 2 meters. The length of the trench will depend on how much you want to install the greenhouse. The hole is filled with a layer of a mixture of sand and gravel, and the top is covered with 30 cm of soil layer. Then you can proceed to laying of the waterproofing layer, and the need for which film or roofing felt.

The size of the prepared foundation customize a wooden base, which is installed and securely fastened. After that, from the boards or beams do stand with a sloping top. Keeping in step 1 m, fastened to the base frame rack, and then attach them to the polycarbonate sheets. Since this is a fairly brittle material, which can easily crack under the screws it is recommended to enclose metal washers.

How to make the hands of a greenhouse covering material in the form of a tent

Greenhouse-hut is ideal for growing crops such as cucumbers, because they can grow to a height of 1.5 meters. Conventional arc not suitable for such a structure, since it will not stable, but the materials at hand and covering material well suited for this purpose. Of course, it is possible to weld a frame made of heavy metal pipes, but it will cost a lot.

You should start with the assembly of the box, which will serve as the basis greenhouse. After that you can move on to the top of the fastener. It is best used for this wooden beam whose length is 1.7 m, and the cross section of 50x50 mm. On one side it is attached to the base, in the same way as is done with arcs.

It is important that after the consolidation, the beam was positioned at an angle towards the bed. The two ends disposed opposite each other is also bonded to elements that gives them form the shed.

To make the structure more strength, set transverse rungs between the upright supports of the hut, which besides serve as a basis for fixing film. At the top, in places where the boards meet, attached one-piece board.

Ready frame can only obtyanut film. In order to wind gusts did not break it, you can be nailed to the cross planks polyethylene using a thin planochki.

Useful advice!To plants was convenient to drag inside this tent can be stretched ordinary garden mesh.

How to organize the space inside the greenhouse for cucumbers: photo

Regardless of whether you have made a mini-greenhouse for cucumbers with their hands, or a complete built a greenhouse, it is important to efficiently use the available space inside. As a rule, the dimensions of the arcs for the greenhouse or the other elements making up the framework, are intended to reflect the fact that in the future you will need to care for plants.

Here are a few recommendations that will help to organize the space inside the greenhouse correctly under cucumbers:

• small-sized design is ideal cucumbers in the greenhouse planting scheme will be split the space into two equal parts, where the beds are located on the sides and the middle of the pass track;

• to the beds had clearly defined boundaries, consider fencing for them. It may be small, but should clearly delineate the space for planting and walkways;
• necessarily treated with a special protective means all materials used for the decoration of the space inside the greenhouse. This will prevent rotting due to moisture;
• attention is required and the soil, which is in the greenhouse, and you'll make a landing cucumbers. Its moisture content should not be too high, especially in the cold season;

• high humidity in the greenhouse - a prerequisite for good plant growth, so all materials, that you plan to use for the design of paths and fences, must be resistant to moisture and temperature.

Similarly, adhering to recommendations on how to make the most greenhouse for cucumbers can be avoided in the future many of the problems associated with the elimination of defects. Thereby saving time and effort to eliminate mistakes.

Unusual greenhouses for cucumbers with their hands out of scrap materials

In order to make a mini-greenhouse for cucumbers, you can use a wide variety of improvised material. Including the ones we used to carelessly throw away in ordinary life. Consider a few simple options.

Greenhouse cucumbers for their own hands from plastic bottles

Empty plastic bottle is considered to be garbage, but they can be useful in the household. Including when it is necessary to equip the place for planting cucumbers. Of course, to ensure the rigidity of the construction, and other required materials, such as wooden frame. However, such an arrangement will be made of those materials, which are certainly there for any country.

Useful advice!For homemade greenhouses from scrap materials to make better gable roof as wooden base will not bend, and the water can collect on the flat roof.

Erecting a primitive wooden frame, it is necessary to sheathe. To do this you will need and plastic bottles. They may be the same or different colors, but it is important to penetrate into the greenhouse enough sunlight, so that from being too dark should be abandoned.

The bottom and the neck of each bottle must be cut off. After that, cut along the remaining portion and is straightened so as to obtain a flat plastic box. Then sew be obtained elements together, using the wire. Having collected a fragment of the desired size, it is easy to attach to the frame using the staple gun.

Given that wire connections are not tight, for the roof is necessary to use an additional layer of polyethylene. So at the lowest cost of funds, you can make your own hands for greenhouse cucumbers from planks and plastic bottles.

The use of wooden window frames for greenhouse cucumbers for their own hands

Another option to save money and make your own greenhouse from scrap materials - used for this purpose your old window frames. In the presence of sufficient amounts thereof can be made completely transparent structure with a top opening. If the frame is not enough, you can build a structure around the building, using it as a wall of one of the parties. It is important to make sure that the top frame is located at a slant, otherwise rainwater will always accumulate on the roof.

Even if you have in stock only one window frame, a small greenhouse is still possible to arrange. For this purpose, perfect old refrigerator box, which can often be found in the cottages.

After reviewing the features of the site selection, as well as general advice on how to make a greenhouse for cucumbers, you can proceed to the assembly. Firstly, deal with all the wooden frames of the special protective impregnation and color. It is important that the incline level of the finished box turned out not less than 30º.

For this purpose, the back wall should be set higher than the front.
If you walk up to the building structure with proper attention, it is possible to blend in with the overall design of the site, made by hand under greenhouse cucumbers. Photo examples of these greenhouses can be found online at the discussion forums and blogs.

Independent production for greenhouse cucumbers from the vines

In order to grow cucumbers, not necessarily to get ready for the greenhouse arc. 4 meters of flexible material can be found among the materials at hand. In order to make the solid construction of the vines will need a garden hose, and old vine, which can be found in almost any body of water. The main thing is to pick up the bars of sufficient length and not less than 10 mm thick.

Gathered the vine should be cleaned from twigs and bark. After that, you need an existing garden hose cut into pieces, each of which will be about 20 cm. On each of its sides is inserted rods. It is important that the vine was a part of him as tightly as possible. The result should turn one full arc consisting of the hose piece and two rods vines.

Using the principle of a conventional arch greenhouse, mounted on the prepared carcass the required number of arches and covered with polyethylene, tightly pulling it, and fixing where needed.

How to make a greenhouse for cucumbers own hands: video instruction