How to hide the pipe in the bathroom, the kitchen and other rooms

Wanting to make a modern and high-quality repairs, many are wondering how to hide the pipe in the bathroom room so that they are as invisible and it does not take up too much space. This article gives an exhaustive answer to this question and examines in detail the most effective ways of masking communication systems in the apartment and a private home.

How to hide the heating pipes, water supply and sanitation: general information

Options, how to hide the heating pipes in a private home, much more than in a city apartment. Communication systems of buildings are completely autonomous and independent of the neighbors. Therefore, they can be installed as you like. If it is supposed to change the configuration of heating and water supply systems in apartment buildings, all actions can be done only with the permission of the operating organization. In addition, it is necessary to take into account the interests of the residents of the house.

The ability to completely hide the pipeline is only available during the construction phase or subject to a major overhaul. In other cases for masking methods of communication used outdoor decoration.

Whether it is necessary to resort to disguise the pipes in the bathroom and the bathroom

Measures to disguise communications systems make it possible to maintain the interior aesthetics. If the methods are used to hide in the wall, then saved a useful area of ​​the room that is important for the owners of small apartments. The use for this purpose pieces of furniture can not only hide all the unsightly parts of the pipe, but also arrange in a room additional storage space, as well as to support the desired style interior.

Important!Any radical changes have an impact on the functioning of the system. Therefore, before you hide the sewer and other communications elements into the wall, you need to carefully study the wiring diagram and indicate the likely consequences.

Thinking about how to hide the pipe in the apartment, be sure to take into account the disadvantages of such events:

1. When used in the repair or poor quality are not suitable for these purposes, materials increases the likelihood of pipe breakout.
2. Access to communication systems will be limited. Exceptions are shutters.
3. If there is an emergency pipe break, for the repairs will have to completely destroy disguise. In a special risk category are drywall construction, with the greatest damage to the interior is applied, if the ceramic tile was used as decoration.
4. Be sure to take into account that the repair in this case is inevitable. In the event of an accident quickly find and fix the leak will not work, so you need to be prepared for what will have to pay damages even neighbors.
5. If masking communication systems used in bathroom furniture, in constant contact with water is unavoidable, resulting in damage to these structures.

Communication in the bathroom: photo risers and pipes

For the construction of communications should be used only high-quality materials, because of this depends directly on the reliability, strength and durability of the entire system.

The bathroom may be present pipe next destination:

• sewer;
• water;
• heating.

The latter option is found only in private homes, so the question is how to hide the heating pipes in the bathroom, is relevant only to the owners of country houses.

Material for the manufacture of the following types of pipes:

• plastic;
• metal;
• PVC;
• metal and plastic;
• Polyethylene.

Metal products are steel and iron pipes. For installation of communication systems, these materials are no longer used, but they can still be found in the buildings of pre-revolutionary and Soviet-built. This category also includes copper pipes. This type of product is considered to be quite modern and technologically advanced, but it has one major drawback - the high cost.

Useful advice!During installation it is desirable to use copper pipe fittings for connecting the individual elements or soldering technology used.

Plastic or polypropylene tubes most in demand. They are ideal for installation of heating systems, water supply and sanitation.

Among the advantages of these products:

• Easy installation system;
• light weight;
• a high degree of reliability.

For connecting elements applied thermal welding technology, whereby the system is obtained entirely monolithic. Such pipes can be hidden via ducts in the bathroom or wall up them directly in the walls. Water polypropylene pipes capable of withstanding high pressure. During operation, it is not subject to rot and rust.

Metal pipes are very flexible, allowing you to create on their basis of the communication system of complex configuration. In contrast to this kind of plastic pipe products may not be combined by welding. For this purpose, metal tongs and fittings. A similar type of connection is unreliable, because the joints often occur leakage.

It is not recommended to apply for the organization of water supply and sewerage system PVC pipe (PVC). The walls of such articles is very thin and not able to withstand pressure differences and high temperatures. The same goes for plastic pipes.

How to close the pipe in the bathroom and what communications areas best left alone

This item will be useful for people who want to learn how to hide the pipe in the bathroom on the wall, placing them in Stroebe a layer of a special solution. This method of masking requires special attention. If hidden this way a pipeline is damaged, it is necessary to break the wall.

The wall can sew the following (excluding the threaded connections):

• welded steel pipe;
• Brazed plastic pipe;
• copper pipes.

Important!It is impossible to cement the pipework immediately after installation. Poor performance of the spike can not always be seen at once. Sometimes leaks thin seams on copper, plastic or steel tubes appear the next day. Therefore Stroebe are terminated only after the system has checked for tightness. To do this, piped water is forced under high pressure.

Before hide plumbing pipes in the bathroom, you need to make sure that the quick access to the following elements of the system will be provided:

• zone where the pipes are fastened by threaded joints;
• the connecting metal fittings X-, T- and L-shaped (high-risk areas where leaks often arise);
• places where filters and counters are installed.

How to hide the pipe in the bathroom properly: Tips for mounting the hidden pipe

There are a few important rules, which necessarily should be followed when installing a hidden pipe.

How to hide in the room heating pipes and water supply so that the system has received a safe and secure? To do this, follow the recommendations of experts:

1. To reduce the number of connections to a minimum.
2. Apply the identical materials.
3. Take care of the presence of the viewing window.
4. Use materials with insulating properties.

Since the joints between pipes relate to areas of particular risk, it is desirable to develop a scheme for communications so that such areas as small as possible. It is better if the wiring plan will be a professional plumber. The specialist will also be able to advise how to hide in the bathroom sewer pipes without errors and irregularities.

If you can not do without the connecting elements, care must be taken that they are made of the same material as the pipe. In this case, the tensile strength, linear expansion coefficient, and other parameters will be identical, so there is no fear that a leakage arises in the conduit.

Is required to consider during a toilet repair, how to hide the pipe so that in this case still have access to the counters. After all, they have to regularly take readings, as well as once every few years should be given to the audit. Solve the problem of access to the meters will help to install a special hatch staffed door.

Important!Inspection door necessarily mounted where there are water filters, and there are a large number of connections. It will allow to monitor the condition of these elements, and in a timely manner to eliminate the leak, if necessary.

In the process piping with the cold water can not be neglected materials with insulating properties. Due to the difference in temperature at which condensation can accumulate. Availability of special insulating jacket will get rid of this problem. Usually it is made of Thermoflex or foam. If use casing before hide the heating pipes in the apartment, it will protect the system in the case where its elements will expand under the influence of heat.

How to hide the pipe in the bathroom: popular ways to disguise

There are many effective and practical ways of masking pipeline in the bathroom. Some of them are easy, therefore, require a minimum amount of time and financial costs of small - others are serious projects.

How to hide the pipe in the room? To this end, methods such:

• staining;
• decoration;
• masking using furniture;
• screen installation of plastic panels;
• building false walls or special plasterboard boxes;
• manufacturing finished gypsum carcass in the form of tiles;
• pipeline installation in the wall.

How to hide the pipe in the bathroom, not by mounting on the wall: painting

Staining can make the pipeline less noticeable on the background wall. Quality result depends on how properly selected dye type and coloring. On sale there are special varieties of white compositions intended for the heating pipes. Unlike conventional colorants, such coatings do not yellow with time and good heat transfer effect. For coloring metal pipe suitable for the following formulations:

• acrylic;
• alkyd;
• Water-dispersed.

For coloring the heating pipe necessarily need to take the heat-resistant dye. Plastic products react badly to acetone. For them, using these types of compounds:

• Nitrocellulose paint or acrylic-based white spirit;
• Water-based dye, intended for the surfaces of materials of mineral origin;
• water-soluble dyes used for the treatment of joinery.

Before staining method to hide the tube, the surface should be carefully prepared:

• clean;
• to remove traces of dust and dirt;
• cover layer of soil composition.

Important!Before direct staining need to make sure that the pipe is dry and there is no condensation.

How to decorate the heating pipe in the room: pictures of interesting design options

For decorating external communications, you can use polyurethane tube, which are decorated with stucco. This results in a small column. This item will fit perfectly into the interior of the bathroom, designed in a classic or aristocratic style. However, this method is applicable only to masking vertical pipes, such as risers.

Related article:

PVC pipes for sewerage: the size and price of plastic products

Classification of plastic pipes: main types, their features and technical characteristics used in practice.

Pipes can be hidden with the aid of artificial vines and other climbing plants, and often use a special dye to be applied to their surface patterns and patterns that repeat on the tile.

Many people wonder how to hide the pipe towel warmer in the bathroom with the help of available tools:

1. Twine - technique of weaving macrame will not only hide the coil, but also to decorate it, while maintaining thermal characteristics of the pipe.
2. The cardboard tube - tubes remaining after food film or foil, cut along the length and worn as a cover for the pipe. Thereafter, they can be applied using dye pattern.
3. Curtain fabric - can hide unsightly coils usual curtain. To hang it, enough to drive a couple of nails or screws and pull the rope between them.

Masking the pipeline and riser in the bathroom with the help of furniture

Many people ask hard questions, how to close the riser in the bathroom, as this section of the pipeline is characterized by large dimensions. Furniture can be used for these purposes. If you choose the right all the furnishings for the bathroom pipes in general will not be visible, and the interior will functional and convenient.

High pencil case is suitable for masking the riser. Before installing the rear design panel is removed, and the internal flanges (in the part where they are adjacent to the wall) are made recesses mimic the size and shape of the tube.

Useful advice!That the foam fits perfectly into the interior of the premises, and there were no problems with installing it, it is advisable to order the production of the piece of furniture according to individual sizes.

Before the owner of the apartment is inevitably the question arises, how to hide the drain pipe in the bathroom, which is adjacent to the sink. To do this, you can use a small bedside table, which is set in the same way as a pencil case. Bathrooms are often installed water heater, supply pipes to which is below. As an alternative approach nightstand beautiful laundry basket, which is placed directly under the washbasin.

How to hide the pipes in the bathroom: Photo screens of plastic panels

Screen Manufacturing of plastic panels - the perfect disguise pipes in a room with high humidity. This type of material is very easy to install. If desired, this design quickly disassembled, and it can be quickly assembled back. Plastic panels are used to mask the risers, communications, under bathroom, as well as horizontal pipes, which lie above the floor.

How to hide in the bathroom sewer pipes with plastic panels? frame assembly steps:

1. Application Markup.
2. Installation of wooden planks on the perimeter (if the screen size is large, it is necessary to install several bars in the center, to provide additional stiffeners).
3. Cutting plastic panels into pieces of appropriate size.
4. Fixing the first panel on a wooden frame using screws.
5. Mounting of the remaining panels which are fastened together by latches.
6. Fixing the last panel with screws.
7. Installation of decorative parts to mask fasteners.

In order to create a wooden frame under the bath, you need to fix the lower bar on the floor. The upper strap is fixed on one side on the wall, and then it is held at the expense of the spacers installed in increments of 40 cm. frame paneling under the bathroom plastic panels is carried out in a similar manner.

Construction of plasterboard ducts for pipes in the bathroom

Construction false walls or plasterboard ducts is considered a more sophisticated way of disguise. Such designs allow the hide conduit which runs horizontally and vertically. This method is suitable for plating baths, however, in contrast to the plastic panels, gypsum board needs finishing.

Important!In environments with high humidity levels need to use a water-resistant plasterboard sheets.

The technology of manufacture of plasterboard boxes:

1. The setting zone marking is applied, in accordance with it are cut materials.
2. The carcass of the box is assembled from metal profiles.
3. Using the building level, you need to check how smooth won the Grand Prix design.
4. Plasterboard sheets are cut into pieces of the required size and attached to the metal frame screws.
5. After assembly, the surface is covered gypsum duct primer layer.
6. Glued at the joints special mesh that will enhance fixation.
7. Box filler is processed.
8. Performed installation of finishing. Usually used for this purpose a tile mosaic.

Raised wall made similarly. It is most often used to disguise the risers. The design is formed from metallic profiles indented about 30 cm from the main wall. Useful floor space at the same time be reduced, but it will be possible to hide the counters and filters. To provide access to these elements is necessary to cut a small flap audit.

How to hide the pipe in the bathroom under the tiles: the production of a functional framework

Functional frame is not simply a box lined with tiles, and convenient design, which can be disassembled if desired. If there are any leaks, these areas will always be freely available.

To work required:

• Tile (can substitute hacksaw);
• corners of plastic;
• metal profiles;
• ceramic tile;
• drill;
• self-tapping screws.

First, you need to make a drawing of the future design and calculate all the dimensions. Then, in the setting zone the walls, floor and ceiling applied marking, in accordance with which the frame is going from metallic profiles. For fixing these elements can be used on the surface of metal staples.

Thereafter, the finished carcass faces are measured. Given the parameters are obtained cutting tiles. At the same time we must take into account the thickness of the tile to the joints between the faces have turned out exactly as you want. Applying feather drill, with a drill at the edges of the tile must perform two holes for screws. Further applied to the tiles and the metal frame through these holes stamped marker. This will allow the installation of tiles without distortions.

Important!The holes in the tile are made of sufficient magnitude to screw could freely pass through them. The size of the slots on the profile must be less fasteners could be to tighten and lock.

When all the tiles are installed, all the mounting area and the corners need to close the corners of plastic. In the place where the communication needs to access, is the gap between the lining, which sets auditing the hatch. In the process, be sure to wear protective goggles and gloves, as well as to wet the tiles with water so that it does not crumble.

How to hide the pipe in the wall: the installation of communications in Stroebe

The most radical and time-consuming masking process is laying pipes in Stroebe. Application of this method is only possible if done remodeling or repair of the premises from scratch. Minus this masking is that a communications hidden in the walls, there will be direct access.

How to hide the water pipes in the walls in the bathroom? To do this, perform these steps:

1. It is made up of communications wiring.
2. Defining the terms of the placement of sanitary units, you can proceed to the formation of cutting grooves in the walls.
3. On the surface of the marking is applied, whereby the walls are formed with grooves via perfodreli. In an extreme case it is allowed to use the gun.
4. From these Stroebe is necessary to remove debris and treat the surface with primer.
5. Stroebe fit in the pipeline, for which should be observed for a few days to make sure there are no leaks.
6. After checking for leaks Stroebe, along with communications are filled with grout.
7. Ensure complete drying of the solution, you can start decorating.

Working with perfodrelyu, be sure to use a respirator and goggles.

How to hide the pipe in the toilet with access to them, the installation of roller blinds

Roller shutters or blinds - light structures made of metal or plastic, which will not only mask the communication in the room, but could be an interesting element of the interior. On sale you can find plumbing shutters of different colors, as well as products, decorated with prints.

Shutters can be raised mechanically (manually) or automatically. opening option depends on canvas size. If the opening width is less than 52 cm, the system can be manually operated via a cord. If the opening is much larger, it is necessary to install automatic.

Important!If the toilet is installed an automatic system lifts the engine must be in a sealed enclosure to prevent dust and moisture could not damage it.

Roller shutters are installed in the frame, which can be produced by one of the above technologies: to collect a box of plastic or drywall or build a false wall. To a lifting mechanism to function properly, the frame sides must be placed strictly parallel to each other. Even with a slight skew rollers will not be able to move freely.

How to hide the pipe in the toilet with access through the shutters? You can use one of these methods:

1. Install blinds on the top of the box - this type of installation is suitable for those cases where the pipeline is located in a natural niche. To install the system, fix enough of the perimeter profiles and shutters directly themselves.
2. Form a box around the blade - installation of the system involves the creation of projecting structure which is sewn on the sides of gypsum boards and Tiled. The very fabric shutters performs the function of the front side.

If selected for the installation of the system, which opens manually built first roller shutters, only then can you begin to install the structure.

How to hide the pipe in the kitchen: photos and examples of interesting ways to disguise

In addition to cleaning, in many kitchens you can find gas stoves, washing machines, dishwashers, hoods and heating equipment. All these functions due to communication systems, so many apartment owners are wondering how to hide in the kitchen of the pipe in such quantity. A method of masking is dependent on the purpose of these tubes, as well as their location.

How to hide a gas pipe in the kitchen: popular ways

On the Internet one can find many examples visually showing through the image, how to hide the gas pipe in the kitchen, without violating the beauty of the interior. The most common variant - painting. Coloring pipe can be made to match the wall, or conversely, to contrast against its background. You can also use the technique of decoupage and painting and decorating with magnets, ropes, plastic plants, mosaics and other available tools.

Note!Employees of gas service is not always welcome curtain decor, so you need to very carefully consider the design before hide the gas pipe, using this method.

Shelves, hooks and holders of all kinds - an integral part of the kitchen, allowing the interior to make it more functional. According to the safety requirements, the gas pipe can not hang anything. However, with the railing, you can create the illusion through which communication will appear part of the picture. To this end, the pipe is painted in a color that is as close to the shade of roof rail. Most often used for this purpose copper and bronze colors, and shades that mimic chrome surface.

Reiling is fixed on the wall directly below the pipe. Due to a similar design and proximity of these elements appear as a single unit, and safety regulations are not violated.

Hiding of the pipe from the kitchen hood, and a heating system boiler

In private homes usually installed autonomous heating system. Therefore, the owner must not only find the best way to disguise this larger equipment in the interior, but also to decide how to hide the pipe of the boiler in the kitchen (with hoses and chimney). Usually used for this box, consisting of metal profiles and drywall. As decoration, you can use a tile or wallpaper.

How to hide the pipe from the exhaust? Popular ways:

• set the built-in furniture;
• build a plasterboard box;
• pave the communication on top of the headset;
• install stretch and suspended ceilings.

To mask heating pipes most commonly used technology installation in concealed floor. If the base is made of wood, laid communication between joists. When organizing concrete flooring system is laid in mortar. Before you hide the heating pipes in the floor in the kitchen, be sure to check the efficiency of communication, as well as ensure their integrity. It is advisable to use a heater to warm the concrete screed was uniform throughout the room.

Places where the pipeline emerges from under the floor, close the special plates. These products are sold in stores, they have a different shape, texture, coloring and so on. N.

There are many ways of masking communication systems. Each of them has both advantages and disadvantages. With a little effort and choosing the most appropriate method, you can hide the most unsightly pipes in the house, or vice versa, make them part of the interior.