Wardrobe in the hallway: photos of various design variations

Wardrobe in the hallway - a photo showcase product variety -is one of the most essential pieces of furniture in the room. Its design and dimensions are selected taking into account peculiarities of the corridor. Internal filling should be well thought through, to be able to make rational use of every centimeter of space. With a variety of facade design the product can be perfectly fit in any interior space.

What could be the wardrobe in the hall: photo options

When making a corridor space requires a special approach. Usually the room is not is large and has structural features which appear in the presence of recesses, outside corners and interior doors, making it difficult to furniture corridor. In this limited space it is necessary to be able to balance functionality and aesthetics.

AT hallway You can install closet, a product with hinged doors and a combined design. The first option is the most popular and sought-after solution. This design will fit even in narrow and confined spaces thanks to the ergonomic sliding doors. Due to the diversity of the facade design of cabinets for the hall - Picture this showcase - corridor will become a well-groomed, stylish and presentable appearance. Outerwear, seasonal footwear, headgear and other accessories are hidden behind a sliding design from prying eyes.

The reliability and durability of doors depends upon execution framework material, where the movement is carried webs. Aluminum products are considered to be of higher quality. They provide quiet operation paintings, do not deform and long serve. Steel guides have a lower cost. Their service life does not exceed 5-8 years.

Important! Compartment system takes up to 10 cm inner space, so the shelf will have a smaller width than the structure itself.

Conventional cabinets configuration hallway

Cabinets with swinging doors, reminiscent of pencil cases, need a lot of space required for opening the design. Internal content is no different from the previous version. This model is most often installed in a spacious hallPhoto, display cabinets design options. Closed product is usually made of natural wood. The facade is decorated with decorative carvings and forged fittings, Which creates a respectable appearance of the product, emphasizing the subtle taste of the owner of the apartment.

Very often you can find in hall embedded in a niche cupboard open, which is devoid of opening doors. This looks minimalistic, but it is most convenient to use, since it allows to quickly remove the hook clothes or take a necessary accessory of a shelf or drawer. However, as the construction is in full sight, things in the closet must be carefully staffed, to the situation in the room did not look like chaos.

Combination models represent a combination of indoor and outdoor cabinets. There may be disposed a small closet-case. The open part is shelves and hooks, and the bottom of its space can be equipped with small comfortable ottoman. It is used not only for the seats - in its cavity may be equipped with storage space for various items.

What is better to choose a hallway closet

The best one for hall a wardrobe with a system of sliding doors. Due to the fact that the product may be shallow (only 45 cm), it does not require much space for installation design. This is enough to place the garment, footwear and accessories everyday. Sliding doors can save space without the need for the presence of free space to open them.

There are two designs: a stand-alone product and built-in wardrobe. The first type is a complete model consisting of the carcass internal filling elements and sliding doors. The design can be moved from place to place. This cabinet is commonly used for rooms with large area, where it is not necessary to save space. The disadvantages of the product are its high cost, due to the high costs of material, and a relatively small effective area (due to the presence of the frame). Moreover, in the upper part of the structure, due to a gap between the article and the ceiling, dust accumulates.

Built-in models can be found quite often in modern hallways. This design is done in the hall to order. Recessed cabinet can be mounted in any tight spaces. Such an article does not have proper walls, ceiling and floor, as they are replaced by elements of the room, to which are attached the filling and the cabinet door. This allows you to save on materials, so this design will cost inexpensive. Photos of built-in closets and the prices of products can be seen in catalogs from renowned manufacturers.

This cabinet is the most spacious and allows full use of the allotted space beneath it. Product design can be created allowing for the corridor layout. It occupies a total area from floor to ceiling that prevents the accumulation of dust on horizontal surfaces. The main drawback of the embedded piece of furniture - it stationary.

Configuration built-in closets in the hallway

The design of embedded wardrobe repeats the layout of the place of its installation. The product can be mounted in a niche in a corner or occupy the space between the two walls. For small corridors is the most rational one angulation. In this case it is possible the most rational use dead zone of a small room, there is organized a compact storage system. This design frees up space along the walls, leaving the room will seem more spacious and comfortable.

Built into the hall corner wardrobe consists of elements of the internal filling and sliding doors. A variation of the corner construction of the model is in the form of a trapezoid, which further equipped with lateral edges. Such a cabinet more capacious than the simple triangular analog. The outer sidewall structure can be equipped with open shelves for different things.

Rectangular module also enjoys great popularity because of the low cost and the original design of the facade, which can be made in any stylistic direction. Design fills the room space along one wall. It may have different depths, depending on the available space.

The most difficult to perform and are costly radius closets, in which the radially circumferential movement of the door. Facade of such designs made of expensive materials by special technology, which significantly increases the price of the built-in hallway closet. However, this is offset by a spectacular, stylish, original and unique appearance. This model is able to fit into any plan that is associated with ergonomic door opening. The disadvantage is the inability to use the closet mirror and laminated chipboard in the manufacture of doors.

Useful advice! Radius coupe has no direct and sharp corners, so that is considered to be less traumatic and is suitable for houses where there are children.

How to choose the size of the closet hallway

As mentioned earlier, closet in the hallway can be placed in a corner or in a niche along one wall. On this depends the size of the structure. The hall built in corner cabinets and rectangular products can have different dimensions. If the cabinet is mounted in the recess, in this case, there are certain limitations that depend on the depth, height and width. The last parameter specifies the number of doors. Two-door cabinets suitable for niche width 1.5-2 m, three-door - 2-3 m, four-door - 2.5-4 m too narrow doors will fall out of the bottom of grooves and wide -. Deform over time.

Important!The width of the sliding door should not exceed 0.5-1 meters.

It is necessary that at the height of the niche is completely closed doors, but the frame can not exceed 2.7-2.8 m. The higher construction will be deprived of the necessary stability and rigidity. If the room is high ceilings, which are also characteristic of the niches door should be made of separate segments, it being possible to use different materials. Variants of the spectacular and unique design of the facade is shown in a photo embedded closet in the hallway.

Related article:

Corner cupboard in the bedroom: a spacious and versatile element of the room

Organization of the internal filling. Product dimensions. Types and design doors. Material. Manufacturers.

For full closet recess should have a depth of 0.6-0.7 m. If this value is less for filling such a construction provides for narrow corridors. If the cabinet has a depth of less than 40 cm, the shelf structure will be ineffective because of their width will be about 30 cm. If the niche is deeper than 1 m, there is the possibility of creating a full locker room in this case. However, it should be to organize the internal content to the closet was convenient in operation.

Recommendations for filling-in closets in the hallway

Built for the corridor are more specialized. Design do not differ large dimensions as designed for storing seasonal clothes and shoes. It does not use special holders for ties and trousers, and do not apply for boxes of underwear, socks and belts.

Internal content-compartment cabinet in the hallway can be fixed or combined. The first option clearly identifies the location of shelves, drawers and hangers. Combined models are equipped with removable shelves, seats for fasteners and other elements that allow later to change the location of the internal filling. Despite the fact that the latter option is more convenient from the point of view of the reliability of such a solution is lost.

Outerwear exceptionally stored on hangers, so a niche with a bar is given a large part of the interior. If the cabinet a narrow two-folding, the two compartments takes hanging clothes. The shelves may be placed at the top and bottom of the structure. In the case of tri-dimensional cabinet one compartment is used for fixed or sliding shelves that can be clearly seen in the photo-in closets in the hallway.

Useful advice! In the small-sized cabinet interior space can zonirovat thus: one compartment is located long outerwear, in other - shorter, which allows equip niche with additional shelves.

At a depth of 50-60 cm constructions usual rod mounted parallel to the door. If the cabinet a narrow depth of 30-45 cm, is used end the crossbar. Capacity of such a construction is much less, but the matter can be corrected with the help of sliding hangers. Cupboard in the hallway is not recommended to install the pantograph. Permanent launching and recovery design is a complex and tedious.

The top shelf is used to place hats, scarves and gloves. To position the shoe recommended inclined metal mesh, which are at the bottom of the enclosure. If space allows, can be equipped with several drawers for storing shoe care products and various accessories. If there is a side wall design, it can be placed on the hooks for bags and caps. Different variants of filling the cabinet in the hallway can be seen on many photos on the Internet.

Important! Accessories for the cabinet in the hallway should be as strong as it will take a higher load than the furniture in other rooms.

The material used for the manufacture of built-in cupboards into the hallway

The underlying factor that affects the reliability, durability and appearance of the furniture - manufacturing material. Built-in wardrobe in the hall to order can be made of chipboard, MDF, solid wood and plywood. The first option is an affordable alternative to natural materials. When facing the product quality can imitate the wood completely. There are several types of particle board, other than the amount of formaldehyde resins in the composition of the substance. For residential use type E1, which is the most environmentally friendly material with low content of harmful substances.

To ensure the durability and moisture resistance material is coated with a special protective film, which prolongs the life of the product. However, at the slightest irregularities such Particleboard furnish begins to collapse. The material is characterized by a wide range of species, but its appearance devoid elegance and originality.

No less popular option for the production of built-in wardrobes to order is MDF. The material has a density, moisture resistance, strength and durability. A wide range of products, which is achieved by coating the surface of veneer plywood, vinyl or melamine paper, allows to choose the variant under any environment.

Significant advantages over the chipboard and MDF (relative quality and environmental material) has a natural wood. Wooden structure is solid and presentable appearance, which is clearly seen in the photo design cabinets in the hallway. The material is characterized by strength, durability, usability and durability. However, such built-in hall closet will be of high value.

Useful advice! Wooden structure is recommended in humid areas, since the article may be deformed.

Plywood represented multilayer wood material consisting of veneer sheets glued together. The surface may be laminated, lacquered or painted. This material can be combined with other options, which will help to get an attractive design closet in the hallway. Photos clearly show the different design ideas.

Variants of the facade built in wardrobes in the hallway: Photo examples

When choosing the material for the facade, should be guided by a system of opening of doors. Hinged elements better be made of particleboard, MDF or plastic. For sliding systems can use any material.

Facade chipboard is the cheapest option, suitable for families with any income. The material is characterized by toughness, environmental friendliness, resistant to dirt and moisture. The surface may be decorated with natural or laminated oak veneer, beech, pine or ash, as shown in photo wardrobes hallway. This option is ideal for corridors, decorated in a classic style.

Facade MDF also characterized by high performance. Smooth and even surface can be painted in any color, which allows the product to enter into any interior hallway photo wardrobes MDF - a visual confirmation.

Important!The ends of the surfaces of the MDF and chipboard covered reliable PVC film which protects against damage and moisture, giving the material a neat appearance.

Interesting and natural looking facades made of rattan and bamboo. This furniture gives the room a sense of warmth, naturalness and natural. It is urgent for the corridors, created in ethnic style. Luxurious and stylish looks wardrobe design in the hall, made of artificial leather. The model will be a real decoration of the hall, decorated with a modern twist or baroque.

Wardrobe in the hall: photo modelsher with mirror, glass and plastic facades

The most popular among the other option is a mirrored façade, use variations of which are displayed on the picture-in closets in a small hallway. He always looks stylish and original, that is ideal for rooms decorated in a minimalist style, loft and high-tech. Mirror blends with different materials. On the surface may be coated or sandblasting pattern printing is executed. Using modern technology, in the mirror, you can create complex and three-dimensional designs and patterns - it is clearly shown in the photo design of built-in closets in the hallway.

Often, in the hallway you can find design with a glass facade. In this case, often using matte material that allows for translucent effect, protecting internal filling from view, and simultaneously visually increase the size premises. So you can draw a small built-in wardrobe in the hall. Additionally, clear glass is used, on the reverse side of which is attached a decorative PVC film with specific additives that increase strength and durability. Such glass facade may be plain, or with different colored abstract and mosaic patterns.

Most popular are prints on all doors which are connected into a single composition in the closed position. During their motion picture gains a third dimension. This effect is clearly shown in the photo of built-in closets in the hallway.

Important! If the surface is damaged the facade, the fragments do not scatter to the sides, as the film will be held.

For the manufacture of curved facade models often used acrylic plastic, which can be matte or glossy. The material has a relatively low weight, which reduces the load on the profile, increasing the period of operation of the furniture. In the acrylic surface is patterned or decorated content of flowers, leaves or coffee beans - a photo demonstrate angular embedded wardrobes in hallway.

Assembling embedded closet in the hallway with his hands

Assembly concealed modern wardrobe in the hall begins with the installation of the main walls. frame members are attached to the ceiling, walls and floor using dowels. For connection parts between the corners are used. To design had a beautiful view, it is necessary to apply the plastic parts, which cover cap screws. You can use steel corners for design reliability.

Modern furniture embodiment fastening elements to each other is application evrovintov. However, they require pre-drilling holes with confirmand. To make the construction of additional rigidity is used for furniture dowels. Evrovinty twisted by the hexagon. They are inserted into the plug cap in the color of the cabinet.

After mounting bases are installing partitions and shelves that can be fitted corners confirmee, eccentrics or Shelf. The most simple, cheap and primitive is considered to be the first option. For heavy loads, use evrovinty. Reliable but time consuming fastening is eccentric head which will be visible from the bottom of the shelf. The optimal variant of the invisible - shelf supports.

Useful advice! Confirmee must be installed exclusively in locations invisible to the cap did not spoil the appearance of the structure.

The final and most important stage is the installation of the sliding doors. Mounting begins with fastening the transverse profiles, which are stuffed with a rubber mallet. Further, horizontal rails are mounted by means of screws. The upper element is used for locking doors on their depth, it provides a lower opening and closing.

The choice of coupe cupboard in the hallway - a very responsible action. The design should be not only a convenient system for storage, but also a stylish element of the corridor.