Furniture gazebos: comfort and harmony combined with grace

Garden furniture - an indispensable attribute of manicured estates and suburban areas. With proper design, it becomes a favorite destination for the whole family and admission guests. The main share of comfort is furniture. Considering exposure weatherproof materials and manufacturing process garden chairs and tables have their own characteristics. What should be the furniture gazebo which model to choose and how to create their own hands, this article will tell.

Mandatory set of furniture for the pavilions and outdoor terraces

Any, even the most beautiful and original gazebo in the garden becomes useless if it lacks at least a primitive bench. And ideally - it should be comfortable and attractive set corresponding to the overall design and attracts by its elegance and comfort. The furniture in the gazebo has significant differences from the chairs and sofas that are used in the house or apartment. The main condition - it maximum comfort and compactness.

Essential pieces of furniture in the gazebo should be a table and chairs. Depending on the area of ​​the construction and the particular needs of the family can be installed sofas, equipped with hammock and benches to replace the chair.

it is the main - picture desks in the pavilion clearly demonstrate that they can not do without clearly attribute, because mainly in the summer time it is here that the family gathers for breakfast, and the evening takes guests. For easy placement at the table, you can use different items for the seat. It may be compact folding chairs, low stools, luxurious lounges, comfortable sofas or benches gazebos.

Decorative shelves, small cupboards and tables give the construction of a home atmosphere, create additional comfort. In choosing furniture importantly - feel the limit, and do not overdo it. Yet it must be remembered filling and harmonious styling. The decoration should not forget about the clarification of the gazebo. It may be wall sconces, spot lamps or lamp with shade in the center.

Specific requirements for the choice of material for the cottage furniture

As mentioned above, the furniture villa arbor must be resistant to atmospheric influences, such as moisture and sunlight. This is especially important if the seating area has an open or semi-open type. Experts and experienced gardeners impose such basic requirements to subjects of an interior:

• ease of use;
• simplicity of care;
• compactness;
• strength and usability of the materials;
• high abrasion resistance;
• providing convenience and comfort;
• reliability, and maximum functionality;
• harmony items between itself and a combination with a common interior;
• affordability plane;
• beauty and originality.

Useful advice!Maximum compliance with all requirements can ensure the production of furniture to the country with their own hands. This not only helps reduce the cost of products, but also to create a unique garden set. In the individual drawings are easily implemented most daring ideas.

Depending on the mobile set of garden furniture can be of two types: fixed and portable. Such a requirement, such as compactness, provide deck chairs and tables, and harmony - the use in the manufacture of the same materials.

Form of chairs, stools and sofas for gazebos picked individually. Relative to the size there are no clear limits. Furniture must fit in size and freely placed, usually in a small area of ​​the arbor. The only substantive requirement applies to the width of the bench. Its minimum rate - 50 cm. If the bench is designed to seat full of people, then this value should not exceed 60 cm.

The combination of price and quality is very important, as the cost usually depends on the material. If it is low-grade, with low wear resistance, then this furniture will last no longer than one season.

A variety of materials for garden furniture: photo examples of successful application

Furniture pavilions and terraces made from all kinds of building materials. The list is quite wide and each corresponds to, if not all, then most of the above requirements. Deservedly Palm branch of the championship is given a wooden model of the array, or OSB, has many advantages.

In the ranking of materials for garden furniture second place belongs to the rattan. It is made of willow twigs. Rattan products are characterized by high brittleness, high costs and complex manufacturing processes. The high level of aesthetics, durability, lightness, flexibility and environmental friendliness fully justify the price. Rattan is especially popular in the elite suburban estates.

Furniture made of artificial rattan gazebo - a budget option, as the cost is several times cheaper. willow substitute acts flexible plastic. The advantages of the material should include a wide range and variety of color, as well as lightness, portability, durability, compactness, and exposed to various atmospheric stability conditions. This material has a less aesthetic appearance, it is prone to burn in the sun and resistant to low temperatures. Repair of such furniture is not possible.

For pergola suitable metal furniture, characterized by their durability and reliability combined with great weight and high cost. Less likely to use a stone that has almost all the necessary advantages of outdoor furniture. The main drawbacks - it's a huge weight, static and larger sizes. Stone and metal to make the furniture is quite problematic.

Useful advice! Opting for Rattan Furniture, You need to take into account that it can be openwork and massive. The first option - it is cheap, small and light pieces of furniture that can withstand small loads. Massive furniture is durable. This large sofas and tables that have a high cost.

Furniture gazebo made of wood: the benefits and the material requirements

Wooden furniture is actually indispensable in the suburban area. The independent production process is permissible to use an array of boards, logs, boards, branches, roots, driftwood and even derivatives of wood materials such as particle board and fiberboard.

Items from the tree do not represent a health hazard, are durable, reliability, durability, beauty, originality and comfort. It is quite possible to make furniture for gazebo made of wood by hand. In addition, it is fairly easy to repair. The disadvantages include flammability, poor moisture resistance of the individual types of wood pests and susceptibility to chemical instability of care products.

Depending on the type of wood furniture for wooden gazebo can have individual properties, in particular:

• Larch objects have a high degree of resistance to humidity and temperature changes;
• acacia furniture has special aesthetic characteristics, but the operation is a relatively short period of time;
• pine furniture is characterized by the wide range of benefits, so it is widely used for the manufacture of interior items for the street.

In choosing the material should be noted that the wooden furniture in the open space should withstand precipitation, attacks drevopoedayuschih insects. It is necessary that she was several times stronger and more reliable than the furniture used indoors. The wood must be dry and free of mold and rot, is not spoiled by the bark beetle, without knots.

Furniture gazebos with their hands: the shape and design

The form of garden furniture depends on the chosen design solutions (and vice versa), so consider these factors should be in the complex, taking into account the area of ​​the arbor, preferences and financial owners possible.

Lineup tables gazebos presented in such a performance:

• fixed - a classic, functional and design solutions;
• Folding - a variant, wherein the mobility, since it is easily folded and moved;
• transformer - a special design with folding mechanism, which can be easily converted into various kinds of furniture, for example, a set of table and chairs.

The use of furniture of various shapes and designs are helping to implement design ideas and create different styles:

• French - is realized in the presence of forged parts and pink accessories;
• tropical - presented furniture made of twigs or other weaves, complemented by colorful plants and decor items;

• oriental - created furniture made of stone, complemented by cushions and accessories comes from China;
• Japanese - it is the hallmark of minimalism, supported by a small number of nevychurnoy furniture.

Useful advice!The table top can be circular, oval, square, rectangle or polygon. Carved legs greatly adorn the product. For family gatherings fit comfortable chairs with backs, and for receiving guests - a spacious bench without backrests, allowing to place a large number of guests.

The size of the furniture with his own hands: photos and sketches of models

Furniture size depends on the individual preferences of the hosts and the gazebo area. The spacious building small compact furniture will look poor, and a massive, on the contrary, pretentious and silly - in a small design.

Related article:

Garden furniture: simple and beautiful, a photo of the original pavilions

Lightweight structures made of different materials. Pavilions of polycarbonate. How to arrange and decorate the gazebo. Overview of the gazebo turnkey price.

The optimum width or diameter of the section and the length of the bench to give considered resolution of 2 meters. If space is in short supply, the compact models are acceptable. If the table you need to accommodate 10 people, the recommended size - 80x120 cm, thickness of the countertop - at least 5 cm. Bench size in this case is the standard parameters: length - 150 cm, and the height and width - 50 cm.

Also, consider a few rules that must be observed in the manufacture of any furniture. Worktop should be approximately 20 cm wider than the frame section. This feature is important when installing legs. Optimum table height for gazebos with their hands is considered to range from 70 to 80 cm. It should also be noted that the height of the feet is directly proportional to the thickness of the countertop.

Counting the dimensions of table and chairs for the garden, you should pay attention to this feature, as symmetry. seating furniture should be placed on both sides of the table, plus the distance required in order to be able to sit quietly on a bench or chair.

Homemade wood furniture: general guidance in making

During the manufacturing process garden furniture should strictly adhere to the order of execution of all phases of production. After completion (to protect) the finished product is required to coat paints in several layers. Wood furniture should be thoroughly sanded to during operation and in the manufacturing process not to drive a splinter under the skin. The finished furniture is subjected to further polishing in order to obtain a smooth surface. When using wood screws and screws must take care of their lack of protrusions above the surface.

The success of the final result, the speed and quality of the work depends on the observance of certain rules of manufacturing technology:

1. Availability of sketches and drawings.
2. Feet X-shape are more stable.
3. The back of a chair or bench should have a slight slope, which promotes relaxation and comfort.
4. It encouraged the production of furniture from scrap materials. Suitable not only boards and bars, but also stones, bricks, stumps and snags.
5. Better to start with the simplest models. For example, from the table to the arbor with their hands. Examples of photos and videos detailing work progress can be found on the Internet and on our website.

The table in the summer-house with their own hands: step by step guide

For the manufacture of a wooden table in the gazebo with his hands must first determine the type of material, prepare it, and to acquire the necessary tools. In any case, the work will need special tools: planer, jig, saw, hacksaw, drill, chisel, hammer grinder and a set of cutters and drills of different diameters, for wood screws 7 cm to 8 cm and 7 mm by 10 mm.

Useful advice!For the self-production of the table is better to choose a model with the optimal dimensions: 120h70h75 see. You can purchase a wooden workpiece size.

The most common and traditional version manufacture of garden furniture with his own hands - from the boards and beams. To do this you need these materials:

• board top (suitable unedged or decking having a cross section 40h140 mm) - 5 pieces of 120 cm long;
• timber 50x60 mm - 2 pieces;
• timber for the legs (preferably the round billet, but the fit and thin beams);
• thin boards for the lower jumper - 3 pieces of 100 cm;
• paint, brushes and roller.

Below is a step by step process of manufacturing a wooden table with his hands (photo depict ready models):

1. Preparing blanks. They are cut out of planks and boards of the right size and carefully grind.
2. Processing lacquer details.
3. Collect countertop occurs by connecting the boards transverse bars. In the production of timber for furniture assembly of parts using screws of this size, so they did not go to the opposite side.
4. carcass assembly, consisting of the legs and the webs.
5. The frame is attached to the table top.

By the same principle other furniture made of planks and boards, including the chairs. The order of the work, including a separate assembly seat and back, a little harder. A simple garden stool operate exactly in the same sequence as the table in miniature.

Furniture arbor of logs: characteristics of the material and the manufacturing process

Quite often for the cottages and garden furniture manufacturing practice of logs and took to drink. It should immediately be noted that in most cases, these items are rather cumbersome, and still will not work for each of the arbor.

The easiest and fastest way to pretty buildings furniture from logs with your hands - it's cutting the barrel on both sides. On one of them is fixed to the seat board, and cut down the bottom gives the stability of the structure. Using two massive saw cut and hoisted them on the countertop, you can make a powerful table. A rather simple design, but it looks very attractive, interesting and even fabulous.

Another option - the production of furniture made of logs small or medium size. The length of the massive logs can serve as a table leg. To give reliable stability of the construction, the beam digged into the ground. If thin logs, they simultaneously use several, usually four. Countertop should not be nailed directly to the legs and the frame attached to the edges of the timber outside.

From the log, you can build a bench with a back. To this end, a log is sawn in half lengthwise. Thus we get just two parts: the seat and backrest. Other timber sawn across at the dice, which will serve as the legs of the bench. By analogy made and desks. The two halves of the logs laid on the support Spila up. Thus, the surface is the top.

Useful advice!It is creating a structure of logs - the easiest method used in the manufacture of table and benches gazebos with their hands. It is enough to have available logs, a minimum of tools and the desire to transform the site.

Original and beautiful ideas of furniture for the garden gazebo

In addition to these options, available materials can be used to manufacture furniture for arbors. bold ideas and original solutions are welcome in this area of ​​self-production of furniture. In particular, the original tables and chairs can be made of branches and tree trunks, stumps, and a variety of snags. Nature itself contributes to the imagination, as the majority of natural materials have a bizarre shape. The unique design is pleasing to the eye the owners and surprise guests.

For example, a table can be made on the basis of the old hemp small diameter. Worktop in this case will serve as a saw cut of thicker logs. Cross-sawn logs with bark or without lacquering, already are independent stationary stools. The basis of the table in such a headset take stump, which is attached to a wooden worktop downed from the shield or saw cut boards.

It can be used for the construction of stationary furniture remains of brick. To do this, build brick columns, which will serve as a bench or table legs. It is important in the construction of such a structure to take care of pre-creating a small foundation. Otherwise, it will be unstable and rapidly destroyed. As countertops again, you can take the shield of wood. Any product from scrap materials must be covered with a protective layer of varnish or paint, which greatly extend the life of furniture, exposed to weathering.

Thus, there are many methods for making a cozy, beautiful and comfortable furniture in the gazebo by the hands. Photo examples of original ideas and detailed instructions on how to create them can be found on the Internet. The main thing is that their subsequent use has created convenience and comfort, bringing maximum enjoyment of the estate owners and their guests.